Securakey SK-KPS Weatherproof Digital Keypads with Wiegand Output
Securakey SK-KPS Weatherproof Digital Keypads with Wiegand Output

Securakey SK-KPS Weatherproof Digital Keypads with Wiegand Output

Securakey Piezo Keypad, Switchplate, 26-Bit
Part Number: SEK-SKKPS
0 Review(s)
Write a Review
Availability:
$368.92
Retail Price:$384.19
Your Savings:$15.27(4%)
  • Low prices.

    Price match guarantee

  • In-House Experts.

    We know our products

  • Easy Returns.

    Quick & Hassle Free

  • Superior Selection.

    Extensive product catalog

The SK-KPM and SK-KPS are a digital keypads with a Wiegand output for use with the Secura Key SKACP, as well as with many other access control systems. Personal Identification Numbers (PINs) are sent to a controller via industry-standard 26 bit Wiegand communications. Secura Key keypads are virtually indestructible. Solid-State piezo technology means no moving parts and no buttons to damage or wear out. The one piece metal housings are fully potted for IP68- rated water-resistance and the anodized graphics never wear off. The SK-KPM is narrow enough to mount to most mullions and door frames, while SK-KPS covers standard electrical boxes. The SK-KPM and SK-KPS combine the convenience of digital keypads with the advanced features and superior security of a true access control system. These keypads do not operate as standalone units.

Features
  • No Moving Parts
  • Solid Metal Housing
  • Vandal Proof
  • Tamper Proof
  • Weatherproof
  • Waterproof
  • Meets MIL Standards

    Specs
  • Manufacturer Securakey
  • Condition New
  • Mounting Mullion/door frames
  • Power Requirements 12-28 VDC, 30 mA
  • Outputs-Wiegand Data 1 and Data 0
  • Open collector 1K ohm. Pull up to internal +5V
  • LED Control Bicolor (red & green)
  • Environmental Operating Temperature: -40° to +257° F (-40° to +125° C)
  • Relative Humidity: 0-100%
  • Tamper Photo-diode sensor
  • Open collector 100 mA. Pulled "low" when light sensed
  • CCTV Interface Activated by keypress
  • Open collector 250 mA. 30 second duration
  • Hold Ground to Activate
  • Causes data to be held in keypad buffer when pulled "low".
  • Cable Required 500 ft. maximum, 5-9 conductor 20 AWG shielded cable
  • Operational Pressing one or more numbers followed by the # key sends the sequence of digits via 26 bit Wiegand protocol to a host control panel. Each keypress causes the Red LED to flash and the beeper to sound.
  • Regulatory Approvals IP68 (water and dust resistance), MIL Standard 810C, 202E, 461B, 462 UL & CE
  • Surface Housing: 7.25” x 1.75” x .875” (18.4 x 4.50 x 2.20 cm)
  • Material: Aluminium Color: Natural
  • Recently Viewed Items