9% off
System Sensor SPRV Wall, Red, Speaker Only; Hi Db

System Sensor SPRV Wall, Red, Speaker Only; Hi Db


System Sensor
System Sensor's SPRV is a SpectrAlert Advanced Wall Installation High Decibel Red Speaker for use in fire alarm systems for alarm alerts. The new SpectrAlert Advance selectable output speaker strobes and dual evacuation speakers can reduce ground faults and allow faster installation. The SpectrAlert Advance Series of speakers and speaker strobes is designed to reduce ground faults. The plug-in design allows the installer to pre-wire mounting plates and dress the wires before plugging in the speakers. The plastic cover prevents nicked wires by covering exposed speaker components. This design also allows faster installations with instant feedback to ensure that wiring is properly connected, rotary switches to select voltage and power settings, and 11 field selectable candela settings for wall and ceiling speaker strobes. The low total harmonic distortion of the SP speaker offers high fidelity sound output while the SPV speaker offers high volume sound output for use in high ambient noise applications. SpectrAlert Advance makes installation easy. Attach a universal mounting plate to a 4×4×21/8 inch back box. Flush mount applications are achievable without the need for an extension ring. Connect the notification appliance circuit or speaker wiring to the terminals on the mounting plate Attach the speaker or speaker strobe to the mounting plate by inserting the product tabs into the mounting plate grooves. Rotate the device into position to lock the product pins into the mounting plate terminals. The device will temporarily hold in place with a catch until it is secured with a captured mounting screw.

  • Plug-in design
  • Protective cover isolates speaker components, reduces ground faults
  • Electrical compatibility with existing SpectrAlert products
  • Field selectable candela settings on wall and ceiling units: Standard: 15, 15/75, 30, 75, 95, 110, 115 High: 135, 150, 177, 185
  • Shorting spring on mounting plate tests continuity before installation
  • Rotary switch simplifies field selection of speaker voltage (25 and 70.7 Vrms) and power settings (1/4 , 1/2 , 1 and 2 watts)
  • Universal mounting plate for wall- and ceiling-mount units
  • Compatible with System Sensor synchronization protocol
  • SP speakers offer high fidelity sound output
  • SPV speakers offer high volume sound output
  • Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
  • No extension ring required
  • Ceiling and wall mount application
  • Optional tamper resistant Torx head screw included

  • Manufacturer System Sensor
  • Category New
  • Voltage: 25 Volts or 70.7 Volts (nominal)
  • Power: 1/4, 1/2, 1, 2 watts
  • Wiring Gauge: 12-18 AWG
  • Frequency Range: 400 to 4000 Hz
  • Humidity Range: 10 to 93% non-condensing
  • Dimensions: 6.0"L x 5.0"W x 2.9"D
  • There are no reviews for this product!

    Related Items

    Recently Viewed Items

    The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.