9% off
System Sensor SPSCRV Indoor Selectable-Output Speaker Strobes and Dual Voltage Evacuation Speakers for Ceiling Applications

System Sensor SPSCRV Indoor Selectable-Output Speaker Strobes and Dual Voltage Evacuation Speakers for Ceiling Applications

0
0
5

$64.33
$70.31
$5.98(9%)
SYS-SPSCRV
System Sensor
The speaker strobe shall be a System Sensor SpectrAlert Advance model SPSCRV listed to UL1480 and UL 1971 and be approved for fire protective signaling systems. The speaker shall be capable of operating at 25.0 or 70.7 nominal Vrms selected via rotary switch, and shall have a frequency range of 400 to 4,000 Hz. The speaker shall have power taps that are selected by rotary switch. The strobe shall comply with the NFPA 72 requirements for visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system.

Features
  • Plug-in design and protective cover reduce ground faults
  • Universal mounting plate with an onboard shorting spring tests wiring continuity before installation
  • No extension ring required
  • Field selectable candela settings: Standard: 15, 15/75, 30, 75, 95, 110, 115 High: 135, 150, 177, 185
  • Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
  • Rotary switch simplifies field selection of speaker voltage (25 and 70.7 Vrms) and power settings (¼, ½, 1 and 2 watts)
  • SP speakers offer high fidelity sound output
  • SPV speakers offer high volume sound output
  • Compatible with System Sensor synchronization protocol
  • Electrical compatibility with existing SpectrAlert products
  • Optional tamper resistant Torx head screw included
  • Listed for ceiling or wall mounting

    Specs
  • Manufacturer System Sensor
  • Category New
  • Operating Temperature 32°F to 120°F (0°C to 49°C)
  • Humidity Range 10 to 93% non-condensing
  • Nominal Voltage (speakers) 25 Volts or 70.7 Volts (nominal)
  • Maximum Supervisory Voltage (speakers) 50 VDC
  • Strobe Flash Rate 1 flash per second
  • Nominal Voltage (strobes) Regulated 12 V DC/FWR or regulated 24 DC/FWR
  • Frequency Range 400 to 4,000 Hz
  • Power ¼, ½, 1, 2 watts
  • There are no reviews for this product!

    Recently Viewed Items

    The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.