The System Sensor SpectrAlert Advance SPSWK-P is an unmarked, white, outdoor speaker strobe for wall installation with selectable strobe settings of 15, 15/75, 30, 75, 95, 110 and 115 cd. Outdoor back box included.
The new SpectrAlert Advance selectable output speaker strobes and dual evacuation speakers can reduce ground faults and allow faster installation.
The SpectrAlert Advance Series of speakers and speaker strobes is designed to reduce ground faults. The plug-in design allows the installer to pre-wire mounting plates and dress the wires before plugging in the speakers. The plastic cover prevents nicked wires by covering exposed speaker components.
This design also allows faster installations with instant feedback to ensure that wiring is properly connected, rotary switches to select voltage and power settings, and 11 field selectable candela settings for wall and ceiling speaker strobes.
The low total harmonic distortion of the SP speaker offers high fidelity sound output while the SPV speaker offers high volume sound output for use in high ambient noise applications.Plug-in design
Electrical compatibility with legacy SpectrAlert products
Shorting spring on mounting plate tests continuity before installation
Rotary switch simplifies field selection of speaker voltage (25 and 70.7 Vrms) and power settings (1/4 , 1/2 , 1 and 2 watts)
Ceiling- and wall-mount application
Universal mounting plate for wall- and ceiling-mount units
Weatherproof per NEMA 4X, IP56
Compatible with System Sensor synchronization protocol
Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
Field-selectable candela settings on wall and ceiling units
Manufacturer System Sensor
Voltage: 25 Volts or 70.7 Volts (nominal)
Candela: Selectable Candela (15, 15/75, 30, 75, 95, 100, 115 cd)
Operating Voltage Range: 8 to 17.5 V (12V nominal) or 16 to 33 V (24 nominal)
Operating Voltage Range with MDL: 9 to 17.5 V (12V nominal) or 17 to 33 V (24 nominal)
DC Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)
FWR Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)
Power: 1/4, 1/2, 1, 2 watts
Wiring Gauge: 12-18 AWG
Frequency Range: 400 to 4000 Hz
Operating Temperature: –40°F to 151°F (–40°C to 66°C)
Dimensions: 6.0"L x 5.0"W x 4.7"D (including lens and speaker)