System Sensor SWH-P Strobe Wall Hi Candela White -Plain
System Sensor SWH-P Strobe Wall Hi Candela White -Plain

System Sensor SWH-P Strobe Wall Hi Candela White -Plain

0 Review(s)
Availability:
Part Number: SYS-SWHP
$38.58
Retail Price:$42.17
Your Savings:$3.59(9%)
System Sensor 2 Wire Strb 5 Cndl White
Write a Review
The System Sensor SpectrAlert Advance SWH-P is an unmarked, white strobe with selectable high-candela strobe settings of 135, 150, 177 and 185 cd. The System Sensor SpectrAlert Advance SW-ALERT and SWH-ALERT amber lens strobes provide the distinctive visual signal used for mass notification during non-fire evacuations. The System Sensor SpectrAlert Advance SW-ALERT and SWH-ALERT strobes are designed with an amber colored lens mounted in a white housing to allow visual signaling for mass notification in compliance with ANSI/UL1638 – Standard for General Signaling Visible Appliances. The SW-ALERT and SWH-ALERT amber lens strobes provide simple installation and instant compatibility with SpectrAlert Advance synchronized systems. Their features include plug-in design and 11 field selectable candela settings. These strobes are indoor products that attach to universal mounting plates connected to a four-inch square, four-inch octagon, singlegang, or double-gang junction boxes. The circuit is wired to the SEMS terminals on the mounting plate. The device will rotate into position, locking the product’s pins into the mounting plate’s terminals. The device will temporarily hold in place with a catch until it is secured with a captured mounting screw.

Features
  • Plug-in design with minimal intrusion into the back box
  • Tamper-resistant construction
  • Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
  • Field-selectable candela settings on wall and ceiling units: 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185
  • Horn rated at 88+ dBA at 16 volts
  • Rotary switch for horn tone and three volume selections
  • Universal mounting plate for wall and ceiling units
  • Mounting plate shorting spring checks wiring continuity before device installation
  • Electrically compatible with existing SpectrAlert products
  • Compatible with MDL sync module

    Specs
  • Manufacturer System Sensor
  • Condition New
  • Color: White
  • Voltage: Regulated 12DC/FWR or regulated 24DC/FWR
  • Candela: Selectable high-candela strobe settings of 135, 150, 177 and 185 cd
  • Operating Voltage Range: 8 to 17.5 V (12V nominal) or 16 to 33 V (24 nominal)
  • DC Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)
  • FWR Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)
  • Wiring Gauge: 12 to 18 AWG
  • Operating Temperature: –40°F to 151°F (–40°C to 66°C)
  • Humidity Range: 10 to 93% non-condensing
  • Wall mount dimensions (including lens): 5.6"L × 4.7"W × 2.5"D (142 mm L × 119 mm W × 64 mm D)
  • Recently Viewed Items

    Customer Service available Mon - Fri 7am - 7pm EST

    Contact us: [email protected]