Trend Net TPE-104S Power Over Ethernet (PoE) Splitter

The Power over Ethernet Splitter, model TPE-104S, is used to install non-PoE devices in remote locations. It splits a networked PoE signal into separate power and data sources. Run an Ethernet cable from a PoE switch (or injector) for distances up to 100 meters and then split the PoE signal into separate data and power sources in order to network a non-PoE device. No need to install non-PoE devices near a power outlet. Save installation and equipment cost when installing access points, IP cameras, and more in a remote location. A handy toggle switch adjusts output power to 5V, 7.5V, 9V, or 12V in order to match non-PoE device power requirements. This compact splitter safeguards valuable network equipment with short circuit protection. Quickly create an integrated PoE and non-PoE network.

Features

Converts non-PoE devices with Power over Ethernet support

1 x 10/100Mbps PoE Auto-MDIX Data In port

1 x 10/100Mbps Auto-MDIX Data Out port

Power out port

1 x 33cm (13”) jumper cable with a 2.0mm connection to the splitter and 2.0mm pin connection to powered device

1 x 33cm (13”) jumper cable with a 2.0mm connection to the splitter and 2.5mm pin connection to powered device

For a product with a 1mm pin power connection, use TRENDnet’s TV-JC35 (3.5mm to 1mm Jumper Cable-sold separately)

Power LED indicator

Install non-PoE devices where a power outlet is not available

Reduce installation and network equipment costs

Safeguards network device with short circuit protection

Adjustable output DIP switch 5V, 7.5V, 9V, and 12V adjustable output

Auto-sensing power drawn from 802.3af power source equipment(PSE) devices

Supplies power up to 15.4 Watts

Light weight and compact size

Wall mounting points

Specs

Manufacturer   Trend Net

Condition New

Hardware

Standard IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3x Flow Control, IEEE 802.3af Power over Ethernet

Network Media 10Mbps: UTP/STP Cat. 5 Up to 100 meters, 100Mbps: UTP/STP Cat. 5 and 5e Up to 100 meters

Ports 1 x 10/100Mbps Data and Power In, 1 x 10/100Mbps Data Out , 1 x 5.5mm pin Power Out

Switch Adjustable output power DIP switch (5V, 7.5V, 9V, 12V)

Power Power In: 48VDC 0.38A

Power Out: 5V(2A), 7.5V(2A), 9V(1.7A), 12V(1.2A)

Power Consumption Max. 0.3 watt

Jumper Cable 1 x (2.0 x 2.0mm), 1 x (2.5 x 2.0mm)

Dimensions 70 x 45 x 25 mm (2.75 x 1.8 x 1 in)