Tripp-Lite PDUMH20HVAT | 3.8kW Single-Phase Metered Automatic Transfer Switch PDU, Two 200-240V C20 Inlets, 8 C13 & 2 C19 Outputs, 1U, TAA
Tripp-Lite PDUMH20HVAT | 3.8kW Single-Phase Metered Automatic Transfer Switch PDU, Two 200-240V C20 Inlets, 8 C13 & 2 C19 Outputs, 1U, TAA

Tripp-Lite PDUMH20HVAT | 3.8kW Single-Phase Metered Automatic Transfer Switch PDU, Two 200-240V C20 Inlets, 8 C13 & 2 C19 Outputs, 1U, TAA

Part Number: 523205
0 Review(s)
Write a Review
Availability:
$576.98
Retail Price:$619.08
Your Savings:$42.10(7%)
  • Low prices.

    Price match guarantee

  • In-House Experts.

    We know our products

  • Easy Returns.

    Quick & Hassle Free

  • Superior Selection.

    Extensive product catalog

Tripp-Lite PDUMH20HVAT | 3.8kW Single-Phase Metered Automatic Transfer Switch PDU, Two 200-240V C20 Inlets, 8 C13 & 2 C19 Outputs, 1U, TAA


https://www.alldataresource.com/assets/images_commscope/features.jpg

Features

  • 200-240V 20A Automatic Transfer Switch (ATS) / Metered PDU (Agency de-rated to 16A continuous)
  • Provides a redundant power option for critical networking equipment with a single input power cord
  • 2 digit display reports output power consumption in amps
  • 1U horizontal rackmount form factor; 14.8 in. / 37.6 cm depth
  • 10 outlets (8 C13, 2 C19)
  • Set of Plug-lock output power cable retention sleeves prevent accidental disconnection of connected devices
  • Set of two C20 inlets support connection to separate PRIMARY and SECONDARY power sources
  • Two 12-ft. / 3.6m C19 to C20 power cables included
  • ATS circuits normally maintain output sourced from the primary input cable; As primary input power fails or becomes unstable, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and stable
  • ATS configurations enable fault-tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system (in a two-UPS environment, the primary input cable must be supported by an online UPS with zero transfer time similar to Tripp Lite SmartOnline series)
  • Advanced ATS configurations utilizing separate mains circuits, backup generators and even separate out of phase utility power grid feeds are fully supported
  • On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source
  • Super-fast switchover between primary and secondary power sources occurs in 2-5 milliseconds
  • Built-in card slot supports optional SNMPWEBCARD or WEBCARDLX for permanent upgrade to a switched & monitored PDU system
  • Outlets are factory programmed for sequential turn-on at 250 millisecond intervals when the PDU is first energized to prevent inrush-related equipment interaction on startup
  • Front panel LEDs confirm power availability on both input lines
  • Federal Trade Agreements Act / TAA Compliant for GSA Schedule purchases



https://www.alldataresource.com/assets/images_commscope/features.jpg

Highlights

  • Single phase 16A 200-240V Auto Transfer Switch / ATS PDU
  • Enables redundant-power option for single-corded network devices
  • Separate primary & secondary inputs connect to any two compatible power sources
  • 1U horizontal rackmount; 2 C20 inputs; 8 C13 and 2 C19 outlets
  • Two digit visual current meter; Upgrade options available
  • Federal Trade Agreements Act / TAA Compliant for GSA Schedule purchases



https://www.alldataresource.com/assets/images_tripplite/package_includes.jpg

Package Includes

  • Metered PDU with ATS Support
  • 2x IEC C19-to-C20 AC input cables
  • Plug-lock cable retention sleeves
  • Mounting hardware
  • User manual with warranty information



https://www.alldataresource.com/assets/images_tripplite/overview.jpg

Overview

UPC Code37332156488.0
PDU TypeAuto-Transfer Switch; Metered; Switched



https://www.alldataresource.com/assets/images_commscope/specs.jpg

Input

PDU Input Voltage200-240V DUAL INPUT
Recommended Electrical ServiceTwo single-phase 16A 200-240V circuits
Maximum Input Amps16
Maximum Input Amps DetailsAgency de-rated to 16A continuous
PDU Plug Type(2) IEC-320 C20
Input PhaseSingle-Phase



https://www.alldataresource.com/assets/images_commscope/specs.jpg

Output

Output Capacity Details3.84kW (240V), 3.68kW (230V), 3.52kW (220V), 3.33kW (208V), 3.2kW (200V) / 16A total capacity; 16A max per C19 outlet; 12A (10A CE) max per C13 outlet
Frequency Compatibility50 / 60 Hz
Output Receptacles(8) C13; (2) C19
Output Nominal Voltage200-240V
Overload Protection-
Customized Load Management ReceptaclesAdding SNMPWEBCARD or WEBCARDLX accessory offers upgrade path to switched PDU (only C13 outlets are switchable upon upgrade); Management Cards can also can be inserted temporarily as a configuration tool to custom program power-on and power-off C13 outlet sequences with user-specified time delays in response to loss and restoration of primary input



https://www.alldataresource.com/assets/images_commscope/specs.jpg

User Interface, Alerts & Controls

Front Panel LCD DisplayDigital display reports total PDU output current in amps
Front Panel LEDs8 front panel LEDs display power on/off status for each C13 outlet, plus 2 LEDs for power status on Primary and Secondary input connection
SwitchesToggle switch near digital display enables the setting of "HI" for 220, 230 or 240V nominal applications or "LO" for 200 or 208V applications



https://www.alldataresource.com/assets/images_tripplite/physical_specifications.jpg

Physical

Form Factors Supported1U rackmount
Material of ConstructionMetal



https://www.alldataresource.com/assets/images_commscope/specs.jpg

Environmental

Operating Temperature Range0C ~ 40C (32F ~ 104F)
Storage Temperature Range-30°C to +50°C (-22°F to +122°F)
Relative Humidity5 to 95% (non-condensing)



https://www.alldataresource.com/assets/images_commscope/specs.jpg

Communications

Network Management CardsSNMPWEBCARD ;  WEBCARDLX
SNMP CompatibilityIncludes slot for optional  SNMPWEBCARD  or  WEBCARDLX  accessory to add built-in network interface and enable remote individual outlet control over IP



https://www.alldataresource.com/assets/images_commscope/features.jpg

Special Features

TVSS GroundingRear grounding lug



https://www.alldataresource.com/assets/images_commscope/specs.jpg

Standards & Compliance

CertificationsTested to UL 60950 (USA, Canada), CE (Europe), Class A (Emissions), NOM (Mexico), RoHS Complaint, TAA Compliant



https://www.alldataresource.com/assets/images_tripplite/warranty.jpg

Warranty

Product Warranty Period (Worldwide)2-year limited warranty



https://www.alldataresource.com/assets/images_commscope/pdf.jpg

Documents and Downloads

Owner's Manual for Switched Rack PDUsClick to View
Single Phase Power Distribution Units (PDUs) Visio StencilClick to View
Single-Phase Power Distribution Units (PDUs) Stencil PreviewClick to View
120V Power Distribution Unit (PDU) Models and Specifications List (English)Click to View
230V Power Distribution Unit (PDU) Specification Brochure (English)Click to View
120V Power Distribution Unit (PDU) Brochure (English)Click to View
230V Power Distribution Unit (PDU) Brochure (English)Click to View
Integrated Solutions Brochure (English)Click to View
EC DeclarationClick to View
Raiffeisen Bank Kosovo Case Study 230V (English)Click to View

Recently Viewed Items