Tripp-Lite SU60K SmartOnline 60kVA Modular 3-Phase UPS System, On-line Double-Conversion UPS for North America

Tripp Lite's SU60K (60kVA) SmartOnline Modular 3-Phase Intelligent, True On-Line UPS System provides 100% system availability with N+1 modular architecture and 1+1 parallel capability. In an N+1 configuration, the SU60K features three self-contained, redundant 20kVA power modules that can be hot-swapped (with the load powered) if maintenance is required. Connect two SU60K models in parallel (1+1 configuration) to provide fail-safe redundancy (two 60kVA models supporting a 60kVA load) or to increase capacity (two 60kVA models supporting an 120kVA load). The SU60K provides mission-critical equipment with the highest level of power protection available. Large capacity 60,000VA/48,000 watt UPS continually converts incoming AC power into filtered DC power, and then resynthesizes it back into AC power with a pure sine wave. Perfectly regulated, continuous sine wave output with zero transfer time offers compatibility with all equipment types. The SU60K's high input power factor, advanced IGBT inverter technology and Digital Signal Processor (DSP) technology create less than 3% input Total Harmonic Distortion (THDi). With SU60K's low THDi, generators run cooler and last longer, allowing managers to save installation costs by installing a generator with a capacity equal to their equipment load (a 1:1 ratio). Extremely efficient operation (up to 96%) saves money by lowering electricity consumption. Hardwire input and output connections support a variety of permanent or PDU style power connections. SU60K features 120/208V AC, 3-phase, 4-wire (plus ground), wye input and output. It also features a wide input voltage correction range: 94-150/163-260V AC. Frequency is 50 or 60 Hz (auto-selectable). SU60K features a single small-footprint tower power module. A stand-alone hardwired external battery module (Models BP480V26B or BP480V40C with matching battery cabinets, available separately) is required for operation and to provide battery backup support. Additional external BP480V26B or BP480V40C battery modules can be connected for extended runtime. Additional battery cabinets for extended runtime solutions also available; contact Tripp Lite for more information. A manual bypass breaker as well as an automatic bypass function ensure 100% availability of connected equipment by safely passing through AC power if the UPS requires maintenance. A built-in RS-232 communication port works with included PowerAlert Software to provide shutdown commands and reporting on a single server. An accessory slot accepts an optional internal SNMP card (model # SNMPWEBCARD) for remote shutdowns, reboots and more. Front panel combination LCD/LED display alerts users to a variety of UPS operational modes and conditions. The LCD display includes a real-time event log screen with up to 500 events listed. A dynamic battery management screen optimizes battery function to lengthen service life and allows cold restart of UPS during a prolonged blackout to utilize its batteries for periodic system access or data retrieval. An Emergency Power Off button turns UPS output OFF and disables Bypass output. Built-in Emergency Power Off (EPO) dry-contact interface supports remote emergency shutdown in large facilities. A start-up service program is recommended to enhance the reliability of the installation.

Features

N+1 configuration: three self-contained, redundant 20kVA power modules can be hot-swapped (with the load powered) if maintenance is required

1+1 configuration: connect two SU60K models in parallel to provide fail-safe redundancy or to increase capacity

High input power factor, advanced IGBT inverter technology and Digital Signal Processor (DSP) technology create low input Total Harmonic Distortion (THDi)

Extremely efficient operation (up to 96%) saves money by lowering electricity consumption

True on-line, double conversion UPS with IGBT technology provides pure, sine wave AC output at all times

Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time

Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems

60,000VA/48,000W power capacity with 3-phase, hardwire 120/208VAC input/output connections

Features a wide input voltage correction range: 94-150/163-260VAC

A stand-alone hardwired external battery module (Models BP480V26B and BP480V40C, available separately from Tripp Lite) is required for operation and to provide battery backup support. Additional external battery modules can be connected for extended runtime.

Front panel combination LCD/LED display includes a real-time event log screen with up to 500 events listed

Dynamic battery management screen optimizes battery function to lengthen service life and allows cold restart of UPS

Built-in RS-232 communication port works with included PowerAlert Software to provide shutdown commands and reporting on a single server

Accessory slot accepts an optional internal SNMP card (Model SNMPWEBCARD) for remote shutdowns, reboots and more

Emergency Power Off button turns UPS output OFF and disables Bypass output

Built-in Emergency Power Off (EPO) dry-contact interface supports remote emergency shutdown in large facilities

Start-up service program is recommended to enhance the reliability of the installation

Specs

Manufacturer Tripp-Lite

Category New

Output Volt Amp Capacity (VA) 60000

Output kVA capacity (kVA) 60

Output Watt Capacity (watts) 48000

Output kW capacity 48

Output power factor 0.8

Crest Factor 3:1

Nominal Output Voltage(s) Supported 120/208V; 3-Phase Wye

Frequency compatibility 50 / 60 Hz

Output voltage regulation (line mode) +/- 2%

Output voltage regulation (Battery mode) +/- 2%

Built-in UPS output receptacles Hardwire

Output AC waveform (AC mode) Sine wave

Output AC waveform (battery mode) Pure Sine wave

Rated input current (at maximum load) 125A (per phase, online)

Nominal Input Voltage(s) Supported 120V / 208V 3 phase wye

UPS input connection type Hardwire

UPS input connection description 120/208V (3-Phase, 4 Wire, wye)

Installation form factors supported with included accessories Tower

Primary form factor Tower

UPS / Power Module dimensions in primary form factor (height x width x depth / inches) 66.9 x 20.5 x 37.7

UPS / Power Module dimensions in primary form factor (height x width x depth / cm) 169.9 x 52.1 x 95.8

Installed whole system maximum rack depth (cm) 0

UPS / Power Module weight (lbs) 1177.5

UPS / Power Module weight (kg) 534.6

UPS Shipping dimensions (height x width x depth / inches) 74.8 x 28.5 x 45

UPS Shipping dimensions (height x width x depth / cm) 190 x 72.4 x 114.3

UPS housing material Steel

Cooling method Fans

Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Relative Humidity 0 to 95%, non-condensing