Viking Electronics E-75-BK Video Entry Phone

Viking E-75-SS Video Entry phones are compact, weather and vandal resistant speaker phones designed to provide two-way handsfree audio communication and color composite video of who is at your door or gate. Viking E-75-SS also includes a built-in 125KHz HID compatible proximity card reader. The card reader outputs industry standard 26-bit Wiegand data, allowing it to be used with a Viking ES-1 door controller or any controller compatible with 26-bit Wiegand format. Viking E-75-SS's compact size allows it to be mounted in a standard single gang electrical box. The E-75 is available in five different attractive finishes to match your door hardware, light fixtures, etc. Replacement E-75 faceplates (PNL75) can be purchased separately and are available in all five standard finishes. Viking E-75-SS entry phones can share a single phone line with house or small business telephones when used with a Viking model C-200, C-250 or C-2000B Entry Phone controller. Viking E-75-SS entry phones can also be connected to an unused analog station port (programmed for ring down) on a phone system or connected directly to a telephone line when used with a Viking model K-1900-5 auto dialer. Viking E-75-SS features a built-in high resolution color video camera, a built-in proximity card reader, microphone and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for automatic hang-up when the call is completed. For outdoor environments or corrosive atmospheres, the Viking E-75-SS is available with Enhanced Weather Protection (EWP).

Features

Built-in 125KHz HID compatible 26-bit Wiegand proximity card reader with LED and beep card read confirmation and EWP board protection

Built-in high resolution color video camera with wide viewing, tilt/swivel adjustments, and wide operating temperature of -30 F to 150 F

Audio and video transmission on one CAT5E cable

Compact size: Front panel is the size of a typical double gang mid- size wall plate

Mounting: Flush mounts in a double gang electrical box (2.25” deep x 3.7” wide x 2.84” tall minimum) or surface mounts in a Viking model VE-5x5 (not included, see DOD# 424) for mounting to a wall, post or VE-GNP Gooseneck Pedestal (EWP recommended)

Available in 5 standard faceplate finishes: Brushed Stainless Steel, Oil Rubbed Bronze, Polished Brass, Satin Black and Satin White

PNL-75 faceplates: Replacement faceplates with matching screws available in all five standard finishes

Features: Mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed (IP67) push button switch, self draining mic mount and UV stable weather resistant powder coating (excludes E-75-SS stainless steel faceplate)

Vandal Resistant Features: 16 gauge polished brass or 18 gauge stainless steel faceplate, stainless steel push button, stainless steel speaker screen, scratch resistant powder coating, hex drive mounting screws

Optional Enhanced Weather Protection (EWP, recommended for outdoor applications) Features: Urethane potted circuit board, internally sealed POTS and dip switches, potted microphone and push-button switch, etc

Blue LED helps locate the push button, indicate ringing and off-hook

Programmable Intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out

Specs

Manufacturer Viking Electronics, Inc.

Condition New

Dimensions: Faceplate: 123.8mm x 125.4mm x 4.3mm (4.875” x 4.938” x 0.17”), Phone: 72mm x 46mm x 42mm (2.84” x 1.8” x 1.65”)

Operating Temperature: -34 C to 65 C (-30 F to 150 F)

Connections: (2) gel-filled butt connectors (3M Scotchlok UR2)

(See Documents for complete specifications)