Viking Electronics K-1700-3-EWP K-1700-3 With Cnhncd Wthr Protection

The K-1700-3 provides a tough and attractive handsfree phone for apartment, and residential door entry or applications requiring a vandal resistant speaker phone. When the “Call” button is pressed, the K-1700-3 returns dial tone. The keypad may then be used to dial any number. If no Touch Tone is entered within 8 seconds, CPC is detected, a busy signal is detected, or the programmable maximum call time has elapsed, the K- 1700-3 will automatically disconnect. Alternatively, the K-1700-3 may be disconnected by pressing the “Call” button again. The K-1700-3 comes complete with a standard, flush mount, rough-in box. In addition, an optional weather resistant, surface mount box is available For outdoor or harsh environments, the K-1700-3 is available with Enhanced Weather Protection (EWP). EWP products feature rubber gaskets and boots, closed cell foam gasketing, hand soldered silicon sealed connections, anti-corrosive gel filled butt connectors, as well as urethane encapsulated circuit boards with internally sealed, field-adjustable trim POTS and DIP switches.

Features

Vandal Resistant Features: 14 gauge, louvered, stainless steel faceplate with stainless steel speaker/mic screen, heavy duty metal keypad and “Call” button

Optional Enhanced Weather Protection (EWP)

Yellow “in use” LED

Volume adjustments for microphone and speaker

Advanced call progress detection: disconnects on busy signal, return to dial tone, CPC reorder tone, maximum call time out and selectable silence time out

Selectable auto-answer feature

Selectable push button disconnect

Zinc plated steel rough-in box with (2) 3/4” conduit knockouts

Optional VE-6x7 Surface Mount Box available

Selectable maximum call time

Selectable VOX switching speed

K-1700-3-EWP conforms to NEMA requirements

Specs

Manufacturer Viking Electronics, Inc.

Condition New

Power: Telephone line powered 20V DC/20mA minimum

Dimensions: Overall: 140mm x 165mm x 66mm (5.5” x 6.5” x 2.6”) , Rough-in box: 114mm x 140mm x 64mm (4.5” x 5.5” x 2.5”)

Environment: -26° C to 54° C (-15° F to 130° F) with up to 100% condensing humidity

Speaker Volume: approximately 70 db maximum @1m

Connections: Standard - (1) two-position terminal block, EWP - Gel-filled tip and ring connectors

CPC Disconnect Time: 300ms minimum