The RAD-AMP extends the usefulness of your phone system to remote employees, as well as providing call forwarding to remote employees or locations.
As a line extender, the RAD-AMP provides authorized users remote access to PABX, Centrex or Electronic Key system features.
As a call diverter, the RAD-AMP provides call forwarding from one location to another. After detecting an inbound call, the RAD-AMP accesses a second phone line, dials a preprogrammed Touch Tone number, and then bridges the two lines.
As a Telecommuting extender, the RAD-AMP gives remote workers access to most PABX/KSU features from their home or cell phone. The home based employee hears a special tone when answering and has the option of taking the work related call. Remote call center personnel can "Log-In" and Log-Out" or change their forwarding number as their location changes. Using Touch Tones, remote workers can use phone system features to transfer the call to another extension or voice mail, start a conference call, generate a page or any other feature available to an analog PABX/KSU extension.Improved audio amplifier
Programmable 6 digit security code
Programmable ring delay
Remote night switch
Disconnects on CPC, busy, return dial tone, maximum call time or by dialing #7
Non-volatile memory (no batteries required)
Auxiliary dry contacts
Programmable 15 second to 49.5 minute call timer
Compatible with analog stations on PABX and KSU systems
Simple programmable toll restriction
500 ms hook switch flash command
2 second disconnect command
Log-In and Log-Out capability
Special tone notifies of work related calls
Supports PABX/KSU features (transfers, voicemail, paging, etc.) to remote employees
Manufacturer Viking Electronics, Inc.
Power 120VAC/13.8VAC 1.25A UL listed adapter provided
Dimensions 133mm x 130mm x 38mm (5.25" x 5.1" x 1.5")
Environmental 0°C to 32°C (32°F to 90°F) with 5% to 95% non-condensing humidity
Connections (2) RJ11 modular jacks
Amplification Factory set to 3dB of audio gain