{"title":"Amplifier Accessories","description":null,"products":[{"product_id":"atlas-sound-aa-pprc-priority-paging-remote-controller","title":"Atlas Sound AA-PPRC | Priority Paging Remote Controller","description":"Atlas Sound AA-PPRC | Priority Paging Remote Controller\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe AtlasIED Priority Pager Relay Controller is a two input by two output loudspeaker level relay switcher. The AA-PPRC is designed to be placed between an amplifier's output and the loudspeaker load. It can be used with 25V, 70.7V, 100V or low impedance systems.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eEach channel can handle up to 350 watts. Placement of the relay controller is not critical because the systems switching can be triggered from a variety of sources. Both High Level and Line Level signals can trigger the relay control circuit as well as a wide range of DC voltages.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eContact closer terminals have also been incorporated for your convenience. Relay release can also be adjusted allowing for proper paging override tuning. The AA-PPRC can be used in variety of installs such as board room applications where an audio presentation system needs to be muted so the page can be heard. The presentation system will resume when the page has completed. It is also ideal for zone paging management for new or existing 8O, 25v, 70.7V, and 100V systems.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209392300267,"sku":"950057","price":365.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_AA-PPRC_Main.jpg?v=1786565351"},{"product_id":"atlas-sound-pa702-rmk-rack-mount-kit-for-half-rack-width-amplifiers-in-full-width-racks","title":"Atlas Sound PA702-RMK | Rack Mount Kit for Half Rack Width Amplifiers in Full Width Racks","description":"Atlas Sound PA702-RMK | Rack Mount Kit for Half Rack Width Amplifiers in Full Width Racks\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe PA702-RMK is a rack mount kit that provides mounting capability for several AtlasIED half width rack amplifiers in standard 19\" equipment racks. The PA702-RMK works with amplifier models PA702, PA702-W, PA1001G, MA40G, MA60G, PA40G, PA60G, and DPA-102PM. The PA702-RMK includes hardware to mount one of these amplifier models individually or two of these amplifiers side by side in the same rack space.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209393479915,"sku":"401754","price":55.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_PA702-RMK_Main.jpg?v=1786565359"},{"product_id":"atlas-sound-aagrmk1-rack-mount-kit-for-1-aa120g-or-aa240g-amplifier","title":"Atlas Sound AAGRMK1 | Rack Mount Kit for 1 AA120G or AA240G Amplifier","description":"Atlas Sound AAGRMK1 | Rack Mount Kit for 1 AA120G or AA240G Amplifier\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe AAGRMK2 Rack Mount Kit provides mounting of 1 or 2 (side-by side) of AtlasIED's new AA35G and\/or AA60G amplifiers in standard 19\" equipment rack. Includes all parts an hardware for 1 AA35G\/AA60G or 2 AA35G\/AA60G. Two connector plates are provided to secure 2 units together, insuring a secure mount and front panel alignment when 2 units are mounted side-by side.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209395183851,"sku":"10081565","price":49.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas-Sound-AAGRMK1-Rack-Mount-Kit-for-1-AA120G-or-AA240G-Amplifier-Main.jpg?v=1786565372"},{"product_id":"atlas-sound-aarmk-hr-half-rack-ears-for-pa601-amplifier","title":"Atlas Sound AARMK-HR | Half Rack Ears for PA601 Amplifier","description":"Atlas Sound AARMK-HR | Half Rack Ears for PA601 Amplifier\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe AARMK-HR works with the PA601 amplifier, allowing it to be rack mounted in a half-width equipment cabinet.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209395216619,"sku":"10081567","price":61.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas-Sound_d663b6fb-e93b-485a-a8da-677569d61d8e.jpg?v=1786565373"},{"product_id":"atlas-sound-dat35st70-70v-stereo-attenuator-with-decora-style-plate","title":"Atlas Sound DAT35ST70 | 70V Stereo Attenuator with Decora-Style Plate","description":"Atlas Sound DAT35ST70 | 70V Stereo Attenuator with Decora-Style Plate\u003cbr\u003e\u003cbr\u003e\u003cp\u003eAtlasIED offers traditional autoformer controls to provide excellent stereo performance and maximum loudspeaker-handling capability. The DAT35ST70 includes positive off and full-power pass through at the maximum setting. Contacts are make-before-break for smooth transition.Designed for 25 or 70.7 volt use provide level control in distributed constant-voltage systems and is UL listed. This single gang model mounts standard E.O. boxes 2 1\/2\" deep. Includes white and ivory knobs, inserts and trim plates.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209405604075,"sku":"765227","price":113.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_DAT35ST70_Main.jpg?v=1786565421"},{"product_id":"atlas-sound-wpd-vc10k-wall-plate-10k-level-control","title":"Atlas Sound WPD-VC10K | Wall Plate 10k? Level Control","description":"Atlas Sound WPD-VC10K | Wall Plate 10k? Level Control\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe AtlasIED WPD-VC10K is a decor style wall plate featuring an adjustable 10k ? potentiometer designed to remotely control the level of connected AtlasIED products like amplifiers.The unit is constructed of durable ABS material and a removable label guard for easy and clean designation of key switch function. The unit can function with VCA 2 or 3 conductor systems and uses a 2 or 3 conductor interface connection designed to work with the included Phoenix style connector. This unit can function in up to 200 feet from the controlled unit using 22-gauge wire.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209405669611,"sku":"723302","price":63.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_WPD-VC10K_Main.jpg?v=1786565422"},{"product_id":"atlas-sound-ied5410eol-en54-16-end-of-line-speaker-load-modules-for-supervision-for-amplifiers-200w","title":"Atlas Sound IED5410EOL | EN54-16 End-of-Line Speaker Load Modules for Supervision (for amplifiers \u003c 200W)","description":"Atlas Sound IED5410EOL | EN54-16 End-of-Line Speaker Load Modules for Supervision (for amplifiers \u0026lt; 200W)\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe Model 5410EOL \/ 5411EOL End-of-Line Module is a device which augments automatic testing of 100 Volt constant voltage speaker lines. The 5410EOL \/ 5411EOL allows testing continuity of speaker wiring all the way to the end of the line without the need and expense of a return wire from the line end. When used with the automated test function of the 5404DZM, the 5432DZM, the DNA2404x, or the T112 or T112C amplifiers, the 5410EOL \/ 5411EOL enables testing the integrity of the speaker lines. While the 5410EOL \/ 5411EOL represents a significant load to the amplifier and speaker lines at 20 kHz, it has no significant effect on the audible frequency performance of the system.\u003cbr\u003e\u003cbr\u003eFor proper \/ complete speaker line testing, speakers on a circuit must be wired as one continuous string without any paralleled off branches. The figure below shows the right and wrong ways to interconnect speakers for proper testing. Only one 5410EOL \/ 5411EOL can be applied to the end of the speaker line of any one DZM speaker output. It is not permissible to place additional units in branch circuits of the same speaker output.\u003cbr\u003e\u003cbr\u003eThis model(5410EOL) is for use with amplifiers producing less than 200W (continuous) or use with the output of the  5432DZM .  For amplifiers producing 200W (continuous) or more, or when using the output of the DNA2404X or T112 \/ T112C, use the  5411EOL . \u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209429065963,"sku":"10230366","price":158.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas-Sound-IED5410EOL-EN54-16-End-of-Line-Speaker-Load-Modules-Main.jpg?v=1786565558"},{"product_id":"atlas-sound-ied5411eol-en54-16-end-of-line-speaker-load-modules-for-supervision-for-amplifiers-200w","title":"Atlas Sound IED5411EOL | EN54-16 End-of-Line Speaker Load Modules for Supervision (for amplifiers \u003e= 200W)","description":"Atlas Sound IED5411EOL | EN54-16 End-of-Line Speaker Load Modules for Supervision (for amplifiers \u0026gt;= 200W)\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe Model 5410EOL \/ 5411EOL End-of-Line Module is a device which augments automatic testing of 100 Volt constant voltage speaker lines. The 5410EOL \/ 5411EOL allows testing continuity of speaker wiring all the way to the end of the line without the need and expense of a return wire from the line end. When used with the automated test function of the 5404DZM, the 5432DZM, the DNA2404x, or the T112 or T112C amplifiers, the 5410EOL \/ 5411EOL enables testing the integrity of the speaker lines. While the 5410EOL \/ 5411EOL represents a significant load to the amplifier and speaker lines at 20 kHz, it has no significant effect on the audible frequency performance of the system.\u003cbr\u003e\u003cbr\u003eFor proper \/ complete speaker line testing, speakers on a circuit must be wired as one continuous string without any paralleled off branches. The figure below shows the right and wrong ways to interconnect speakers for proper testing. Only one 5410EOL \/ 5411EOL can be applied to the end of the speaker line of any one DZM speaker output. It is not permissible to place additional units in branch circuits of the same speaker output.\u003cbr\u003e\u003cbr\u003eThis model(5411EOL) is for use with amplifiers producing 200W (continuous) or greater, or for use with the outpout of the DNA2404X or T112 \/ T112C amplifiers.  For amplifiers producing less than 200W, use the  5410EOL  \u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209435095275,"sku":"10230365","price":158.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas-Sound-IED5411EOL-End-of-Line-Speaker-Load-Modules-Main.jpg?v=1786565613"},{"product_id":"atlas-sound-aagrmk2-rack-mount-kit-for-1-or-2-aa35g-or-aa60g-amplifiers","title":"Atlas Sound AAGRMK2 | Rack Mount Kit for 1 or 2 AA35G or AA60G Amplifiers","description":"Atlas Sound AAGRMK2 | Rack Mount Kit for 1 or 2 AA35G or AA60G Amplifiers\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe AAGRMK2 Rack Mount Kit provides mounting of 1 or 2 (side-by side) of AtlasIED's new AA35G and\/or AA60G amplifiers in standard 19\" equipment rack. Includes all parts an hardware for 1 AA35G\/AA60G or 2 AA35G\/AA60G. Two connector plates are provided to secure 2 units together, insuring a secure mount and front panel alignment when 2 units are mounted side-by side.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209440567531,"sku":"943683","price":57.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas-Sound-AAGRMK2-Rack-Mount-Kit-Main.jpg?v=1786565660"},{"product_id":"atlas-sound-cp700rrk-cp700-rear-rack-rail-mounting-kit","title":"Atlas Sound CP700RRK | CP700 Rear Rack Rail Mounting Kit","description":"Atlas Sound CP700RRK | CP700 Rear Rack Rail Mounting Kit\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe CP700RRK Rear Rack Mount Kit provides rear mounting support of AtlasIED's new CP700 amplifier in standard 19\" equipment rack.     This unique mounting system will accommodate rack depths from 18.5\" to 36\".\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209440829675,"sku":"957831","price":104.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas-Sound-CP700RRK-CP700-Rear-Rack-Rail-Mounting-Kit-Main.jpg?v=1786565663"},{"product_id":"atlas-sound-aarmk2-5-rack-mount-kit-for-1-or-2-aa35-aa60-pa601-aa30phd-aa50phd-aa100phd","title":"Atlas Sound AARMK2-5 | Rack Mount Kit for 1 or 2 AA35, AA60, PA601, AA30PHD, AA50PHD, AA100PHD","description":"Atlas Sound AARMK2-5 | Rack Mount Kit for 1 or 2 AA35, AA60, PA601, AA30PHD, AA50PHD, AA100PHD\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe AARMK2-5 Rack Mount Kit provides mounting of 1 or 2 (side-by side) of Atlas Sound's new AA35 and or PA601amplifiers in standard 19\" equipment rack. Includes all parts an hardware for 1 AA35\/AA60, 1 PA601, 2 AA35\/AA60, 2 PA601, or a combination of each. 2 connector plates are provided to secure 2 units together, insuring a secure mount and front panel alignment when 2 units are mounted side-by side.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209450266859,"sku":"401751","price":68.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_AARMK2-5_Main.jpg?v=1786565746"},{"product_id":"atlas-sound-aarmk2-0-rack-mount-kit-for-1-aa120-aa240-aa200phd-and-aa400phd","title":"Atlas Sound AARMK2-0 | Rack Mount Kit for (1) AA120, AA240, AA200PHD, and AA400PHD","description":"Atlas Sound AARMK2-0 | Rack Mount Kit for (1) AA120, AA240, AA200PHD, and AA400PHD\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe AARMK2-0 Rack Mount Kit from AtlasIED provides mounting of Atlas Sound's new AA120, AA240, and AA120M Mixer amplifiers (sold separately) in standard 19\" equipment rack.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209450299627,"sku":"401750","price":60.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_AARMK2-0_Main.jpg?v=1786565746"}],"url":"https:\/\/www.alldataresource.com\/collections\/amplifier-accessories.oembed","provider":"All Data Resource","version":"1.0","type":"link"}