{"title":"Multiple Channel Power Amplifiers","description":null,"products":[{"product_id":"atlas-sound-dpa804-800-watt-networkable-4-channel-power-amplifier-with-optional-dante-network-audio","title":"Atlas Sound DPA804 | 800-Watt Networkable 4-Channel Power Amplifier with Optional Dante Network Audio","description":"Atlas Sound DPA804 | 800-Watt Networkable 4-Channel Power Amplifier with Optional Dante Network Audio\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe AtlasIED DPA804 amplifier features a combination of flexibility, performance, and control to provide high value features for applications that require more than just great sound. The network enabled DPA804 is a DSP controlled four-channel amplifier that can be configured in three different amplification arrangements to meet a wide range of installation design requirements.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe DPA804 can be used right out of the box in its factory default configuration as a traditional four-channel 70.7V commercial power amplifier requiring no programming, special set-up, or network connectivity. However, the DPA804 can be configured in four-channel mode with either 4? or 8? load impedances for two stereo zones. Many system designs require both low and high impedance amplification. The DPA804 can be configured for a 70.7V\/100V paging\/background system on two channels and the other two channels can be used for 4?\/8? foreground stereo applications.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe DPA804 comes standard with four balanced line inputs and an accessory slot for an optional DPA-DAC4 four-channel Dante™ receiver card or a DPA-AMIX (2) mic\/line and (2) AUX input card, for a total of eight inputs. All inputs can be mixed and routed to any of the four amplifier channels. All amplifier channels have an assortment of DSP tools including level controls, EQs, limiters, high \u0026amp; low pass filters, and delay to provide flexibility for a range of applications.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe output level can be assigned to either the front panel potentiometers or to the onboard GUI. Wired remote level controls can be configured to allow simple control for the end user. Each unit also features GUI based input and output level metering along with assignable mute functions that are triggered via an audio signal or contact closure. Access to the DSP settings is accomplished via computer, tablet, or mobile device using a web browser. All settings can be password protected.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209392234731,"sku":"986614","price":2124.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_DPA804_Main.jpg?v=1786565351"},{"product_id":"atlas-sound-hpa-dac8-eight-input-dante-accessory-card-for-hpa-amplifiers","title":"Atlas Sound HPA-DAC8 | Eight-Input Dante Accessory Card for HPA Amplifiers","description":"Atlas Sound HPA-DAC8 | Eight-Input Dante Accessory Card for HPA Amplifiers\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe HPA-DAC8 accessory card is designed to work in conjunction with HPA Series 8-channel amplifiers. The HPA-DAC8 is an 8-input Dante® receiver that features digital audio transportation over standard IP networks.\u003cbr\u003e\u003cbr\u003eThe HPA Series 8-channel amplifiers come standard with eight balanced line inputs and an accessory slot to fit the HPA-DAC8. Dante® Input 1, and the analog balanced input levels are isolated from each other and are electronically summed together forming a mixed output. Both the Dante® input and the analog balanced input levels to the amplifier channel are controlled by the Ch-1 level control. Channel 2 thru 8 inputs are configured the same as Channel 1.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209394299115,"sku":"10320504","price":1021.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_HPA-DAC8_Main.jpg?v=1786565366"},{"product_id":"atlas-sound-hpa2408-eight-channel-2400-watt-commercial-amplifier","title":"Atlas Sound HPA2408 | Eight-Channel, 2400-Watt Commercial Amplifier","description":"Atlas Sound HPA2408 | Eight-Channel, 2400-Watt Commercial Amplifier\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe AtlasIED high power amplifier, “HPA” Series, is designed for use in either commercial 25V \/ 70V \/ 100V distributed systems or low impedance 8 or 4 ohm applications that require amplifiers to handle multiple impedance loads. The HPA2408 is compact and lightweight in comparison to other models delivering similar performance. The HPA2408 features Generation II Class D Output topology that provides high efficiency amplification with the sound quality of a Class AB amplifier. The power supply is designed for global use featuring a wide range voltage power supply with power factor correction and remains stable during fluctuating power conditions. The combination of the PFC power supply and the highly efficient output stage collectively deliver exceptional dynamic high output voltage and current to virtually any loudspeaker load while not requiring a tremendous amount of AC power.\u003cbr\u003e\u003cbr\u003eThe HPA Series features front panel stepped level controls with a security cover, remote turn on, balanced line inputs with sensitivity settings, fault reporting and an accessory card slots for an optional Dante™ eight-channel digital audio interface. Cooling is not an issue because of the unique output stage low resistance direct couple thermal transfer design. HPA also is energy efficient and meets Energy Star 1W standby mode standards.\u003cbr\u003e\u003cbr\u003eWhether the application is a large distributed constant voltage sound system or a high SPL sound reinforcement system, the AtlasIED HPA Series is the answer for high power \/ cost effective reliable amplification requirements.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209394462955,"sku":"10320505","price":3892.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_HPA2408_Main.jpg?v=1786565367"},{"product_id":"atlas-sound-dpa1202-1200-watt-networkable-multi-channel-power-amplifier-with-optional-dante-network-audio","title":"Atlas Sound DPA1202 | 1200-Watt Networkable Multi-Channel Power Amplifier with Optional Dante Network Audio","description":"Atlas Sound DPA1202 | 1200-Watt Networkable Multi-Channel Power Amplifier with Optional Dante Network Audio\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe AtlasIED DPA1202 features a combination of flexibility, performance and control to provide high value features for applications that require more than just great sound. The network based DPA1202 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe unit is factory preconfigured in a two-channel 70V mode. If the design requires four channels of low impedance amplification, the amplifier can be configured as 4-channel model with either 4? or 8? load impedances. Many system designs require both low and high impedance amplification. This unit can be configured to deliver 70V\/100V for a paging\/background system on a single channel plus two additional 4?\/8? amplifier channels for foreground stereo applications.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe DPA1202 comes standard with four balanced line inputs and an accessory slot for an optional DPA-DAC4 4-channel Dante™ receiver card or a DPA-AMIX (2) mic \/ line, (2) AUX input card, giving the DPA1202 a total of 8 inputs. All inputs can be mixed and routed to any of the four amplifier channels. All four amplifier channels have an assortment of DSP tools including level controls, EQ’s, limiters, high \u0026amp; low pass filters, and delay to provide flexibility for a range of applications.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe output level can be assigned to either the front panel potentiometers or to the on board GUI. Wired remote level control can be configured to allow simple control for the end user. Each unit also features GUI based input and output level metering along with assignable mute functions that are triggered via an audio signal or contact closure. Access to the DSP settings is accomplished via computer, tablet or mobile device using a web browser. All settings can be password protected.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe unit also includes a PC based site manager software that automatically searches within a specific network for all DPA amplifiers on the network. It will list them and allow a single click access to any unit. The DPA Site Manager software can do a variety of functions besides locating IP addresses such as; fault reporting, input \u0026amp; output status, standby status and remote activation via a scheduler timer.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe flexibility of the DPA Series amplifiers and comprehensive assortment of local or network control configurations make them an ideal choice in today’s sophisticated commercial audio market.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209406030059,"sku":"921297","price":2108.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_DPA1202_Main.jpg?v=1786565424"},{"product_id":"atlas-sound-dpa602-600-watt-networkable-multi-channel-power-amplifier-with-optional-dante-network-audio","title":"Atlas Sound DPA602 | 600-Watt Networkable Multi-Channel Power Amplifier with Optional Dante Network Audio","description":"Atlas Sound DPA602 | 600-Watt Networkable Multi-Channel Power Amplifier with Optional Dante Network Audio\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe AtlasIED DPA Series amplifiers feature a combination of flexibility, performance, and control to provide high value features for applications that require more than just great sound. The network enabled DPA series amplifiers are DSP controlled 4-channel amplifiers that can be configured in three different amplification arrangements to meet a wide range of installation design requirements.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eDPA amplifiers can be used right out of the box in their factory default configuration as traditional 2-channel 70.7V\/100V commercial power amplifiers requiring no programming, special set-up, or network connectivity. However, when web enabled, the DPA amplifiers can be configured in 4-channel mode with either 4? or 8? load impedances for two stereo zones. Many system designs require both low and high impedance amplification. The DPA series can be configured for a 70.7V\/100V paging\/background system on one channel and the other two channels can be used for 4?\/8? foreground stereo applications.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe DPA comes standard with four balanced line inputs and an accessory slot for an optional DPA-DAC4 4-channel Dante™ receiver card or a DPA-AMIX (2) mic\/line and (2) AUX input card, for a total of 8 inputs. All inputs can be mixed and routed to any of the four amplifier channels. All amplifier channels have an assortment of DSP tools including level controls, EQ’s, limiters, high \u0026amp; low pass filters, and delay to provide flexibility for a range of applications.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe output level can be assigned to either the front panel potentiometers or to the onboard GUI. Wired remote level control can be configured to allow simple control for the end user. Each unit also features GUI based input and output level metering along with assignable mute functions that are triggered via an audio signal or contact closure. Access to the DSP settings is accomplished via computer, tablet, or mobile device using a web browser. All settings can be password protected.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe DPA series amplifiers also include PC based site manager software that automatically searches within a specific network for all DPA amplifiers on the network. It will list them and allow a single click access to any unit. The DPA Site Manager software can do a variety of functions besides locating IP addresses such as; fault reporting, input \u0026amp; output status, standby status and remote activation via a scheduler timer.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe flexibility of the DPA Series amplifiers and comprehensive assortment of local or network control configurations make them an ideal choice in today’s sophisticated commercial audio market.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209418318059,"sku":"10081840","price":1686.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_DPA602_Main.jpg?v=1786565507"},{"product_id":"atlas-sound-hpa1204-four-channel-1200-watt-commercial-amplifier","title":"Atlas Sound HPA1204 | Four-Channel, 1200-Watt Commercial Amplifier","description":"Atlas Sound HPA1204 | Four-Channel, 1200-Watt Commercial Amplifier\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe AtlasIED High Power Amplifier “HPA” Series is designed for use in both commercial 70V\/100V distributed systems and professional applications that require amplifiers to handle multiple impedance loads. The HPA is compact and lightweight in comparison to other models delivering similar power levels. The HPA Series features Generation II Class D Output topology that provides great efficiency with the sound quality of a Class AB amplifier. The power supply is a switch mode, global auto sensing design that maintains a stable output during fluctuating power conditions. The power supply and output stage collectively are designed to deliver exceptional dynamic high output voltage and current to virtually any speaker load.\u003cbr\u003e\u003cbr\u003eThe HPA Series features front panel detente level controls with a security cover, remote turn on, balanced inputs, fault reporting and a rear panel accessory card slot for an optional Dante™ 2 or 4-channel digital audio interface. HPA Series amplifiers feature a unique output stage, low resistance direct coupled thermal transfer design that effectively maintains optimal temperature across all loads and output levels. HPA Series amplifiers are also energy efficient and meet Energy Star standards, drawing only 1W of power in standby mode.\u003cbr\u003e\u003cbr\u003eWhether the application is a large distributed constant voltage sound system or a high SPL sound reinforcement system, the AtlasIED HPA Series is the answer for high power\/cost effective amplification needs.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209439289579,"sku":"10096352","price":2054.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_HPA1204_Main.jpg?v=1786565648"},{"product_id":"atlas-sound-dpa404-400-watt-networkable-4-channel-power-amplifier-with-optional-dante-network-audio","title":"Atlas Sound DPA404 | 400-Watt Networkable 4-Channel Power Amplifier with Optional Dante Network Audio","description":"Atlas Sound DPA404 | 400-Watt Networkable 4-Channel Power Amplifier with Optional Dante Network Audio\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe AtlasIED DPA404 amplifier features a combination of flexibility, performance, and control to provide high value features for applications that require more than just great sound. The network enabled DPA404 is a DSP controlled four-channel amplifier that can be configured in three different amplification arrangements to meet a wide range of installation design requirements.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe DPA404 can be used right out of the box in its factory default configuration as a traditional four-channel 70.7V commercial power amplifier requiring no programming, special set-up, or network connectivity. However, the DPA404 can be configured in four-channel mode with either 4? or 8? load impedances for two stereo zones. Many system designs require both low and high impedance amplification. The DPA404 can be configured for a 70.7V\/100V paging\/background system on two channels and the other two channels can be used for 4?\/8? foreground stereo applications.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe DPA404 comes standard with four balanced line inputs and an accessory slot for an optional DPA-DAC4 four-channel Dante™ receiver card or a DPA-AMIX (2) mic\/line and (2) AUX input card, for a total of eight inputs. All inputs can be mixed and routed to any of the four amplifier channels. All amplifier channels have an assortment of DSP tools including level controls, EQs, limiters, high \u0026amp; low pass filters, and delay to provide flexibility for a range of applications.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe output level can be assigned to either the front panel potentiometers or to the onboard GUI. Wired remote level controls can be configured to allow simple control for the end user. Each unit also features GUI based input and output level metering along with assignable mute functions that are triggered via an audio signal or contact closure. Access to the DSP settings is accomplished via computer, tablet, or mobile device using a web browser. All settings can be password protected.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209441353963,"sku":"9782359","price":1616.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_DPA404_Main.jpg?v=1786565667"},{"product_id":"atlas-sound-hpa-dac4-four-input-dante-accessory-card-for-hpa-amplifiers","title":"Atlas Sound HPA-DAC4 | Four-Input Dante Accessory Card for HPA Amplifiers","description":"Atlas Sound HPA-DAC4 | Four-Input Dante Accessory Card for HPA Amplifiers\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe HPA-DAC4 accessory card is designed to work in conjunction with HPA Series 4-channel amplifiers. The HPA-DAC4 is a 4-input Dante receiver that features digital audio transportation over standard IP networks. The HPA Series 4-channel amplifiers come standard with fourbalanced line inputs and an accessory card slot to add an additional 4-inputs, giving the amplifier a total of 8-inputs.\u003cbr\u003e\u003cbr\u003eAnalog Input 1 and Dante Input 1 are isolated from each other and are electronically summed together forming a mixed output. Both Input levels to the amplifier channel are controlled by the Ch-1 level control. Channel 2, 3, and 4 inputs are configured the same as Channel 1.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209441681643,"sku":"9798549","price":699.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas-Sound-HPA-DAC4-Four-Input-Dante-Accessory-Card-for-HPA-Amplifiers-Main.jpg?v=1786565671"},{"product_id":"atlas-sound-hpa2604-four-channel-2600-watt-commercial-amplifier","title":"Atlas Sound HPA2604 | Four-Channel, 2600-Watt Commercial Amplifier","description":"Atlas Sound HPA2604 | Four-Channel, 2600-Watt Commercial Amplifier\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe AtlasIED High Power Amplifier “HPA” Series has been designed to be versatile for uses in both commercial 70V distributed systems and professional applications that require amplifiers to handle 4 and 8 ohm loads. The HPA is compact and lightweight in comparison to other models delivering the similar power levels. The HPA Series features generation II Class I Output topology that gives the efficiency close to a Class D amplifier with the sound quality of a Class AB amplifier. The power supply is switch mode global auto sensing gen 3 design that maintains a stable output during fluxuating power conditions. The power supply and output stage collectively are designed to deliver exceptional dynamic high output voltage and current to virtually any speaker load.\u003cbr\u003e\u003cbr\u003eThe HPA Series features front panel detented level controls with a security cover, remote turn on, balanced inputs, fault reporting and an accessory card slot for an optional Dante™ 2 or 4-channel digital audio interface. Cooling is not an issue because of the unique output stage low resistance direct couple thermal transfer design. HPA also is energy efficient and meets Energy Star standards with only drawing 1W of power in standby mode.\u003cbr\u003e\u003cbr\u003eWhether your application is a large distributed constant voltage sound system or a high SPL sound reinforcement system, the AtlasIED HPA Series is the answer for high power\/cost effective amplification need.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209441714411,"sku":"9798548","price":2653.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_HPA2604_Main.jpg?v=1786565671"}],"url":"https:\/\/www.alldataresource.com\/collections\/multiple-channel-power-amplifiers.oembed","provider":"All Data Resource","version":"1.0","type":"link"}