{"title":"SHS Series","description":null,"products":[{"product_id":"atlas-sound-shs-3t2-b-multi-function-strategically-hidden-speaker-sold-in-pairs","title":"Atlas Sound SHS-3T2-B | Multi-function Strategically Hidden Speaker (Sold in Pairs)","description":"Atlas Sound SHS-3T2-B | Multi-function Strategically Hidden Speaker (Sold in Pairs)\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe SHS-3T2 includes a single full-range driver housed in a multifunction enclosure providing high-definition sound. The transducer is attached to the SHS’s tunnel waveguide to take the sound performance to the next level. As the sound exits the waveguide, it travels through the patented adaptive dispersion lens that acts as a phase plug. The acoustic result is all frequencies are radiated evenly and annoying “hot spots” found directly below the speakers are minimized. This makes the SHS not only a great solution for sound and music reinforcement, but also a great sound masking speaker as well.\u003cbr\u003e\u003cbr\u003eThe SHS-3T2 can be mounted in one of three ways: wall mounted, pendent mounted, or in-ceiling mounted. The included wall mount offers up to 90° variable angle to ensure optimum position and performance no matter where it is installed. For open ceiling applications, the SHS-3T2 can utilize the included steel mounting cable. The top of the mounting bracket is also threaded so standard ceiling fan mount down pipe hardware can also be used where required.      The mounting bracket can be removed when in-ceiling installation is required to minimize its height in the ceiling. An optional tile bridge, model SHS-3T2-TB, is available for drop tile ceiling installations. Once installed in the ceiling, the speaker is concealed using a patented 3\" diameter dispersion lens with a micro trim ring. Once installed, the visual appearance is reduced to the size of a high-end ceiling sprinkler head. The SHS-3T2 can become a true chameleon through AtlasIED’s DesignLab™. AtlasIED offers custom color matching via UV printer that enables an integrator to submit an image or sample of the ceiling. Then, using a state-of-the-art print service, a custom lens and trim ring that matches the submitted sample will be shipped to the customer. For more information about the custom DesignLab process, visit  https:\/\/www.atlasied.com\/shs-cust .\u003cbr\u003e\u003cbr\u003eThe SHS-3T2 ships with the ability to utilize the Adaptive Dispersion Lens in three different configurations for various applications. Sound masking installations and installations with low ceilings (less than 10') should use the 4mm dispersion lens with solid panel attached. Installations with ceilings between 10' and 14' should use the 8mm dispersion lens with the solid panel attached. Installations with ceiling heights above 14' or in applications that require maximum intelligibility, the 4mm direct fire lens should be used with the perforated panel attached.\u003cbr\u003e\u003cbr\u003eThe SHS-3T2 can be connected to any 70V \/ 100V amplifier using standard 2-conductor commercial speaker wire with the included removable 4-pole euro style connector. Additionally, when used with an AtlasIED Z-Series High-Definition Acoustical System the speakers can be connected using Cat5e cable. Each SHS-3T2 features \"in\" and \"out\" Cat5e terminals making it easy to daisy chain speakers to the Z-Series source unit.\u003cbr\u003e\u003cbr\u003eThe Contractor's Pack (SHS-3T2WCP) is available in the white, in-ceiling configuration only. It does not include hardware for wall or pendent mounting.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209393643755,"sku":"10320456","price":315.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_SHS-3T2-B_Main.jpg?v=1786565360"},{"product_id":"atlas-sound-shs-3t2-hd-package-of-2-strategically-hidden-speaker-for-hard-deck-ceilings","title":"Atlas Sound SHS-3T2-HD | Package of 2 Strategically Hidden Speaker for Hard Deck Ceilings","description":"Atlas Sound SHS-3T2-HD | Package of 2 Strategically Hidden Speaker for Hard Deck Ceilings\u003cbr\u003e\u003cbr\u003e\u003cp\u003eEach SHS-3T2-HD includes a single full-range driver housed in an enclosure providing high-quality sound. The transducer is attached to the SHS’s tunnel waveguide to take the sound performance to the next level. As the sound exits the waveguide, it travels through the patented adaptive dispersion lens that acts as a phase plug. The acoustic result is all frequencies are radiated evenly and annoying “hot spots” found directly below the speakers are minimized. This makes the SHS not only a great solution for sound and music reinforcement, but also a great sound masking speaker as well.\u003cbr\u003e\u003cbr\u003eThe SHS-3T2-HD is designed to blind mount into hard deck ceilings with a minimum clearance of 3.5\" above the ceiling deck. The specially designed expansion ring locks the speaker in place. Once installed in the ceiling, the speaker is concealed using a patented 3\" diameter dispersion lens with a micro trim ring. Once installed, the visual appearance is reduced to the size of a high-end ceiling sprinkler head. The SHS-3T2-HD can become a true chameleon through AtlasIED’s DesignLab. AtlasIED offers custom color matching via UV printer that enables an integrator to submit an image or sample of the ceiling. Then, using a state-of-the-art print service, a custom lens and trim ring that matches the submitted sample will be shipped to the customer. For more information about the custom DesignLab process, visit www.atlasied.com\/shs-cust.\u003cbr\u003e\u003cbr\u003eThe SHS-3T2-HD ships with the ability to utilize the Adaptive Dispersion Lens in three different configurations for various applications. Sound masking installations and installations with low ceilings (less than 10') should use the standard 4mm dispersion lens with solid lens cover attached. Installations with ceilings between 10' and 14' should use the standard 8mm dispersion lens with the solid lens cover attached. Installations with ceiling heights above 14' or in applications that require maximum intelligibility, the 4mm direct fire lens should be used with the direct fire grille attached.      The SHS-3T2-HD can be connected to any 70V \/ 100V amplifier using standard 2-conductor commercial speaker wire with the included removable 4-pole euro style connector. Additionally, when used with an AtlasIED Z-Series High-Definition Acoustical System the speakers can be connected using Cat5e cable. Each SHS-3T2-HD features \"in\" and \"out\" Cat5e terminals making it easy to daisy chain speakers to the Z-Series source unit.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209393676523,"sku":"10320455","price":339.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_SHS-3T2-HD_Main.jpg?v=1786565361"},{"product_id":"atlas-sound-shs-3t2-w-multi-function-strategically-hidden-speaker-sold-in-pairs","title":"Atlas Sound SHS-3T2-W | Multi-function Strategically Hidden Speaker (Sold in Pairs)","description":"Atlas Sound SHS-3T2-W | Multi-function Strategically Hidden Speaker (Sold in Pairs)\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe SHS-3T2 includes a single full-range driver housed in a multifunction enclosure providing high-definition sound. The transducer is attached to the SHS’s tunnel waveguide to take the sound performance to the next level. As the sound exits the waveguide, it travels through the patented adaptive dispersion lens that acts as a phase plug. The acoustic result is all frequencies are radiated evenly and annoying “hot spots” found directly below the speakers are minimized. This makes the SHS not only a great solution for sound and music reinforcement, but also a great sound masking speaker as well.\u003cbr\u003e\u003cbr\u003eThe SHS-3T2 can be mounted in one of three ways: wall mounted, pendent mounted, or in-ceiling mounted. The included wall mount offers up to 90° variable angle to ensure optimum position and performance no matter where it is installed. For open ceiling applications, the SHS-3T2 can utilize the included steel mounting cable. The top of the mounting bracket is also threaded so standard ceiling fan mount down pipe hardware can also be used where required.      The mounting bracket can be removed when in-ceiling installation is required to minimize its height in the ceiling. An optional tile bridge, model SHS-3T2-TB, is available for drop tile ceiling installations. Once installed in the ceiling, the speaker is concealed using a patented 3\" diameter dispersion lens with a micro trim ring. Once installed, the visual appearance is reduced to the size of a high-end ceiling sprinkler head. The SHS-3T2 can become a true chameleon through AtlasIED’s DesignLab™. AtlasIED offers custom color matching via UV printer that enables an integrator to submit an image or sample of the ceiling. Then, using a state-of-the-art print service, a custom lens and trim ring that matches the submitted sample will be shipped to the customer. For more information about the custom DesignLab process, visit  https:\/\/www.atlasied.com\/shs-cust .\u003cbr\u003e\u003cbr\u003eThe SHS-3T2 ships with the ability to utilize the Adaptive Dispersion Lens in three different configurations for various applications. Sound masking installations and installations with low ceilings (less than 10') should use the 4mm dispersion lens with solid panel attached. Installations with ceilings between 10' and 14' should use the 8mm dispersion lens with the solid panel attached. Installations with ceiling heights above 14' or in applications that require maximum intelligibility, the 4mm direct fire lens should be used with the perforated panel attached.\u003cbr\u003e\u003cbr\u003eThe SHS-3T2 can be connected to any 70V \/ 100V amplifier using standard 2-conductor commercial speaker wire with the included removable 4-pole euro style connector. Additionally, when used with an AtlasIED Z-Series High-Definition Acoustical System the speakers can be connected using Cat5e cable. Each SHS-3T2 features \"in\" and \"out\" Cat5e terminals making it easy to daisy chain speakers to the Z-Series source unit.\u003cbr\u003e\u003cbr\u003eThe Contractor's Pack (SHS-3T2WCP) is available in the white, in-ceiling configuration only. It does not include hardware for wall or pendent mounting.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209393709291,"sku":"10320454","price":315.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_SHS-3T2-B_Main_b3a46ef0-156b-4b54-acfb-2b0d5767e69d.jpg?v=1786565361"},{"product_id":"atlas-sound-shs-3t2wcp-multi-function-strategically-hidden-speaker-white-ceiling-only-configuration-contractors-pack-of-24","title":"Atlas Sound SHS-3T2WCP | Multi-function Strategically Hidden Speaker, White, Ceiling-Only Configuration, Contractors Pack of 24","description":"Atlas Sound SHS-3T2WCP | Multi-function Strategically Hidden Speaker, White, Ceiling-Only Configuration, Contractors Pack of 24\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe SHS-3T2WCP Contractor Pack, is a bulk pack option of 24 white SHS-3T2 units when only In-Ceiling installation is required. The SHS-3T2 includes a single full-ranger driver housed in a multifunction enclosure providing high-definition sound. The transducer is attached to the SHS’s tunnel waveguide to take the sound performance to the next level. As the sound exits the waveguide, it travels through the patented adaptive dispersion lens that acts as a phase plug. The acoustic result is all frequencies are radiated evenly and annoying “hot spots” found directly below the speakers are minimized. This makes the SHS not only a great solution for sound and music reinforcement, but also a great sound masking speaker as well.\u003cbr\u003e\u003cbr\u003eThe SHS-3T2WCP units can be in-Ceiling mounted. Once installed in the ceiling, the speaker is concealed using a patented 3\" diameter dispersion lens with a micro trim ring. Once installed, the visual appearance is reduced to the size of a high-end ceiling sprinkler head. The SHS-3T2 can become a true chameleon through AtlasIED’s DesignLab. AtlasIED offers custom color matching via UV printer that enables an integrator to submit an image or sample of the ceiling. Then, using a state-of-the-art print service, a custom lens and trim ring that matches the submitted sample will be shipped to the customer. For more information about the custom DesignLab process, visit  www.atlasied.com\/shs-cust .\u003cbr\u003e\u003cbr\u003eThe SHS-3T2 ships with the ability to utilize the Adaptive Dispersion Lens in three different configurations for various applications. Sound masking installations and installations with low ceilings (less than 10') should use the 4mm dispersion lens with solid panel attached.\u003cbr\u003e\u003cbr\u003eInstallations with ceilings between 10' and 14' should use the 8mm dispersion lens with the solid panel attached. Installations with ceiling heights above 14' or in applications that require maximum intelligibility, the 4mm direct fire lens should be used with the perforated panel attached.\u003cbr\u003e\u003cbr\u003eThe SHS-3T2 can be connected to any 70V \/ 100V amplifier using standard 2-conductor commercial speaker wire with the included removable 4-pole euro style connector. Additionally, when used with an AtlasIED Z-Series High-Definition Acoustical System the speakers can be connected using Cat5e cable. Each SHS-3T2 features \"in\" and \"out\" Cat5e terminals making it easy to daisy chain speakers to the Z-Series source unit.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209393742059,"sku":"10320453","price":3276.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_SHS-3T2WCP_Main.jpg?v=1786565361"},{"product_id":"atlas-sound-shs-ext-sound-chamber-extension-for-shs-6t2","title":"Atlas Sound SHS-EXT | Sound Chamber Extension for SHS-6T2","description":"Atlas Sound SHS-EXT | Sound Chamber Extension for SHS-6T2\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe SHS-EXT is designed to work with the SHS-6T2 strategically hidden speaker in thicker ceiling applications. The SHS-EXT can attach to the SHS sound chamber, creating a 0.5\" (13mm) extension for attachment of the selected SHS diffuser. AtlasIED does not recommend using more than two SHS-EXT per SHS-6T2 in order to maintain the proper sound coverage and quality.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209421103339,"sku":"10230102","price":23.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas-Sound-SHS-EXT-Sound-Chamber-Extension-for-SHS-6T2-Main.jpg?v=1786565523"},{"product_id":"atlas-sound-shs-cvr-shs-clean-room-speaker-cover","title":"Atlas Sound SHS-CVR | SHS Clean Room Speaker Cover","description":"Atlas Sound SHS-CVR | SHS Clean Room Speaker Cover\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe SHS-CVR is designed to work with the SHS-6T2 strategically hidden speaker, where there is a high sensitivity to clean air. The SHS-CVR easily installs over the SHS opening to create a barrier between the building plenum and the clean sapce. AtlasIED recommends using the SHS-CVR in spaces when paging notifications are as important as the air quality.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWatch the video below to see how easy it is to add the SHS-CVR accessory to a Strategically Hidden Speaker for clean room applications.\u003cbr\u003e\u003cbr\u003e \u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209423954155,"sku":"10230216","price":36.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_SHS-CVR_Main.jpg?v=1786565527"},{"product_id":"atlas-sound-shs-tb-elevated-thin-ceiling-bridge-kit-for-shs-6t2","title":"Atlas Sound SHS-TB | Elevated Thin Ceiling Bridge Kit for SHS-6T2","description":"Atlas Sound SHS-TB | Elevated Thin Ceiling Bridge Kit for SHS-6T2\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe SHS-TB is designed for use with the SHS-6T2 strategically hidden speaker in applications with ceiling tile or material that is less than 0.5\" (13mm) thick. This bridge kit ensures the diffuser can properly attach to the SHS with no gap at the ceiling tile.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209430376683,"sku":"10230297","price":33.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_SHS-TB_Main.jpg?v=1786565569"},{"product_id":"atlas-sound-shs-6t2-strategically-hidden-speaker-with-32-watt-70-100v-transformer-and-enclosure","title":"Atlas Sound SHS-6T2 | Strategically Hidden Speaker with 32-Watt 70\/100V Transformer and Enclosure","description":"Atlas Sound SHS-6T2 | Strategically Hidden Speaker with 32-Watt 70\/100V Transformer and Enclosure\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe SHS-6T2 is an industry-first strategically hidden ceiling speaker. It is designed to blend into the aesthetic of any ceiling while retaining optimal sound performance. The perfect speaker for architecturally impressive environments where you want your high-definition audio heard, not seen. SHS is easy to install and particularly useful for background music, paging\/ notification and sound masking. It comes packaged with three different adaptive dispersion lenses for a variety of applications and installation locations.\u003cbr\u003e\u003cbr\u003eExotically different, perfectly disguised...      The SHS Series incorporates a radically different (and patented) waveguide design than any other ceiling speaker. Inside its concealed enclosure is a 2-way driver that provides high-definition sound. As the sound exits the two-way transducers, both pass through a patented adaptive diffuser lens for smooth and uniform frequency response throughout its intended ultra-wide coverage. Through years of research and design its acoustic frequencies are radiated evenly, diffusing away bothersome “hot spots” common to standard speakers making it a great solution for paging and background music as well as applications including sound masking.       Optimal Function \u003cbr\u003e\u003cbr\u003eThe SHS ships with the ability to utilize the Adaptive Dispersion Lens in three different configurations for various applications. Sound masking installations and installations with low ceilings (less than 10') should use the 4mm dispersion lens with solid panel attached. Installations with ceilings between 10' and 14' should use the 8mm dispersion lens with the solid panel attached. Installations with ceiling heights above 14' or in applications that require maximum intelligibility, the 4mm dispersion lens should be used with the perforated panel attached.\u003cbr\u003e\u003cbr\u003e Easy Installation \u003cbr\u003e\u003cbr\u003eVisually, only a 3-inch diameter lens and a micro trim ring are visible on the front of the ceiling. The SHS is an installer’s dream with an integrated rail system. All the installation parts are built into the enclosure including the tile rails, which require no rail screws for installation. Simply pull the four rails out from the enclosure and it’s ready for install, drill a three-inch hole in the ceiling tile, set the speaker through the hole, and snap on the adaptive dispersion lens.\u003cbr\u003e\u003cbr\u003e Good Design Is Just As Important As Good Sound \u003cbr\u003e\u003cbr\u003eThe SHS can become a true chameleon by using the  DesignLab™ by AtlasIED  custom match process. When you purchase the SHS-CUST  process, our state of the art UV printer can custom match the color and blend the texture of virtually any ceiling. This color match service delivers a lens and trim ring that will seamlessly match the color, design, and\/or surface material of the ceiling. Remember to add the SHS-CUST to any SHS order that will be installed in striking, elegant or complex environments to maintain architectural continuity and design appeal.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209436405995,"sku":"10230529","price":362.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_SHS-6T2_Main.jpg?v=1786565625"},{"product_id":"atlas-sound-shs-6t2cvr-strategically-hidden-speaker-with-included-clean-room-cover","title":"Atlas Sound SHS-6T2CVR | Strategically Hidden Speaker with included Clean Room Cover","description":"Atlas Sound SHS-6T2CVR | Strategically Hidden Speaker with included Clean Room Cover\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe SHS-6T2CVR is an industry-first strategically hidden ceiling speaker designed specifically for areas where there is high sensitivity to clean air. The included SHS-CVR (cover) easily installs over the SHS opening to create a barrier between the building plenum and clean space. AtlasIED recommends using the SHS-6T2CVR kit when paging notifications are just as important as the air quality in an environment.      \u003cbr\u003e\u003cbr\u003e Easy Installation \u003cbr\u003e\u003cbr\u003eVisually, only a 3-inch diameter lens and a micro trim ring are visible on the front of the ceiling. The SHS is an installer’s dream with an integrated rail system. All the installation parts are built into the enclosure including the tile rails, which require no rail screws for installation. Simply pull the four rails out from the enclosure and it’s ready for install, drill a three-inch hole in the ceiling tile, set the speaker through the hole and add the clean room cover.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209437225195,"sku":"10230513","price":379.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_SHS-6T2CVR_Main.jpg?v=1786565633"},{"product_id":"atlas-sound-shs-cust-custom-print-trim-ring-and-lens-for-shs-speakers","title":"Atlas Sound SHS-CUST | Custom Print Trim Ring and Lens for SHS Speakers","description":"Atlas Sound SHS-CUST | Custom Print Trim Ring and Lens for SHS Speakers\u003cbr\u003e\u003cbr\u003e\u003cp\u003eHide the SHS In Virtually Any Ceiling  DesignLab™ by AtlasIED's custom print process takes the SHS from well-hidden to completely camouflaged in virtually any ceiling. Using an incredibly accurate UV-printer, AtlasIED is able to match colors and patterns so the SHS can blend into any environment.       UV Printer in Action in the AtlasIED Custom Lab  from  AtlasIED  on  Vimeo .\u003cbr\u003e\u003cbr\u003e  Simple Steps to a Custom Print    \u003cbr\u003e\u003cbr\u003eThe easiest way to ensure AtlasIED can properly match the ceiling material is to upload a high quality image. Using our custom SHS Camera Target, which AtlasIED will ship to you once your SHS-CUST order has been processed, it is easy to take and upload an image of the material. The image is then processed to render a customized printed sample.Download the custom image guidelines   HERE .\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e Then what happens? \u003cbr\u003e\u003cbr\u003eOnce AtlasIED has received the image, a custom lens with seven slight color variations will be shipped for customer selection.       \u003cbr\u003e\u003cbr\u003eOnce a final color sample selection is provided to AtlasIED, a final mockup will be shipped for customer approval. Upon approval, the UV-printer goes to work producing the required number of custom lenses. Once printing is completed all custom trim rings and lenses are shipped to the customer for installation.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49209437323499,"sku":"10230553","price":129.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Atlas_Sound_SHS-CUST_Main.jpg?v=1786565633"}],"url":"https:\/\/www.alldataresource.com\/collections\/shs-series.oembed","provider":"All Data Resource","version":"1.0","type":"link"}