{"title":"Smoke and Heat Detection","description":" ","products":[{"product_id":"honeywell-silent-knight-sd505-dts-k-relay-remote-test-switch-for-smoke-detector","title":"Honeywell Silent Knight SD505-DTS-K | Relay Remote Test Switch, For Smoke Detector","description":"Honeywell Silent Knight SD505DTSK | Relay Remote Test Switch, For Smoke Detector\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSD505-DTS-K is a remote test switch for the DUCTR Duct Smoke Detector.\u003c\/p\u003e\u003cp\u003eWith the DTS-K, you can test your duct smoke detector remotely without the hassle of having to physically move to your detector's location. The switch provides LED indication of SD505-DUCTR status, and it uses the same key as the control panel.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195053940971,"sku":"698287","price":269.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Honeywell_Silent_Knight_SD505-DTS-K_Smoke_Detector_main.jpg?v=1786475565"},{"product_id":"honeywell-silent-knight-b200s-iv-intelligent-sounder-base-16-33-volt-dc-vfwr-500-ua-maximum-standby","title":"Honeywell Silent Knight B200S-IV | Intelligent Sounder Base, 16 - 33 Volt Dc (Vfwr), 500 Ua Maximum Standby","description":"Honeywell Silent Knight B200SIV | Intelligent Sounder Base, 16 - 33 Volt Dc (Vfwr), 500 Ua Maximum Standby\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe sounder base \"listens in\" to the communication between the attached sensor head And the fire alarm control panel (FACP) to adopt the same address as the detector, but as a unique device type on the loop. The FACP can then use that address to comman d an individual sounder - or a group of sounders - to activate. The command set from the panel can be tailored to the specific event, allowing selection of volume, tone And group. In addition, some FACPs will enable custom tone patterns.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195133337835,"sku":"698275","price":107.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Honeywell_Silent_Knight_B200S-IV_Sounder_Base_main.jpg?v=1786476487"},{"product_id":"system-sensor-d4120w-smoke-detector-duct-smoke-detector","title":"System Sensor D4120W - Smoke Detector - Duct Smoke Detector,","description":"System Sensor D4120W | Watertight 4-Wire Photoelectric Duct Smoke Detector, 24VDC\/120VAC\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe InnovairFlex D4120W watertight 4-wire photoelectric duct smoke detector is UL listed as a watertight enclosure providing protection against falling dirt, rain, windblown dust, splashing and hose directed water. D4120W duct smoke detector features a pivoting housing that fits various applications: both square and rectangular footprints mount to round or rectangular ductwork.\u003c\/p\u003e\u003cp\u003eThis unit senses smoke in the most challenging conditions, operating in airflow speeds of 100 to 4,000 feet per minute, temperatures of -4ºF to 158ºF, and a humidity range of 0 to 95 percent (noncondensing). A plug-in sensor head offers superior false alarm immunity. These features, plus a NEMA 4 rating, allow operators to mount the detector to rooftop HVAC equipment or use the detector in other harsh environments.\u003c\/p\u003e\u003cp\u003eThe new design provides the same form, fit, and wiring terminations as the standard InnovairFlex unit. Superior test and operational features added to the standard model are also available in this watertight unit. As the only watertight duct smoke detector on the market, D4120W provides unsurpassed environmental protection while simplifying installation, testing, and maintenance.\u003c\/p\u003e\u003cp\u003eThis InnovairFlex duct smoke detector can be customized to meet local codes and specifications without additional wiring. The new InnovairFlex product line is compatible with all previous Innovair models, including remote test accessories.\u003c\/p\u003e\u003cp\u003eWARNING: Duct smoke detectors are NOT a substitute for open area smoke detectors; NOT a substitute for early warning detection; NOT a replacement for a building’s regular fire detection system. Refer to NFPA 72 and 90A for additional information.\u003c\/p\u003e\u003cp\u003eNOTE: To maintain the watertight properties of this duct smoke detector, watertight conduit and fittings must be used. Mount the product with the conduit holes facing downwards, if possible\u003c\/p\u003e\u003cp\u003eThe InnovairFlex D4120W watertight 4-wire photoelectric duct smoke detector is UL listed as a watertight enclosure providing protection against falling dirt, rain, windblown dust, splashing and hose directed water. D4120W duct smoke detector features a pivoting housing that fits various applications: both square and rectangular footprints mount to round or rectangular ductwork.\u003c\/p\u003e\u003cp\u003eThis unit senses smoke in the most challenging conditions, operating in airflow speeds of 100 to 4,000 feet per minute, temperatures of –4°F to 158°F, and a humidity range of 0 to 95 percent (noncondensing). A plug-in sensor head offers superior false alarm immunity.\u003c\/p\u003e\u003cp\u003eThese features, plus a NEMA 4 rating, allow operators to mount the detector to rooftop HVAC equipment or use the detector in other harsh environments. The new design provides the same form, fit, and wiring terminations as the standard InnovairFlex unit. Superior test and operational features added to the standard model are also available in this watertight unit.\u003c\/p\u003e\u003cp\u003eAs the only watertight duct smoke detector on the market, D4120W provides unsurpassed environmental protection while simplifying installation, testing, and maintenance.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195166302443,"sku":"674181","price":400.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-D4120W.jpg?v=1786476650"},{"product_id":"system-sensor-d4120-smoke-detector-duct-smoke-detector","title":"System Sensor D4120 - Smoke Detector - Duct Smoke Detector,","description":"System Sensor D4120 | Duct Smoke Detector, 4-wire, Photoelectric, Low-flow\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe InnovairFlex D4120 4-wire photoelectric duct smoke detector features a pivoting housing that fits both square and rectangular footprints and mounts to round or rectangular ductwork. This unit senses smoke in the most challenging conditions, operati ng in airflow speeds of 100 to 4,000 feet per minute, temperatures of -4ºF to 158ºF, and a humidity range of 0 to 95 percent (noncondensing). A plug-in sensor head offers improved false alarm immunity and simple installation, testing, and maintenance. An improved cover design isolates the sensor head from the low-flow feature for simple maintenance.\u003c\/p\u003e\u003cp\u003eThe InnovairFlex housing provides ample wiring space, a 3\/4-inch conduit knockout, and built-in short circuit protection to prevent damage to sensitive components during installation. High contrast terminal designations make wiring easy. With its 2:1 sensor-to-power capability, the power board of the D4120 may be used to monitor a second sensor, D4S, simultaneously (i.e., supply and return side). As many as 50 InnovairFlex detectors can be interconnected. When one unit senses smoke, all interconnected detectors will switch their relays; only the detector sensing smoke will go into alarm, thus pinpointing the fire source.\u003c\/p\u003e\u003cp\u003eAn easy-access Test\/Reset button makes it possible to test the unit with the cover on. Three DIP switches can be used to configure field selectable settings: cover tamper delay, number of sensors to be controlled, and shut down on trouble option. Each power board has two LED s that can be used to indicate the status of connected sensors, and a quick reference imprinted on the cover explains the LED status indications (Standby, Maintenance, Trouble, and Alarm). The InnovairFlex duct smoke detector can be customized to meet local codes and specifications without additional wiring. The new InnovairFlex product line is compatible with all previous Innovair models, including remote test accessories.\u003c\/p\u003e\u003cp\u003eWARNING: Duct smoke detectors are NOT a substitute for open area smoke detectors; NOT a substitute for early warning detection; NOT a replacement for a building’s regular fire detection system.\u003c\/p\u003e\u003cp\u003eThe InnovairFlex D4120 4-wire photoelectric duct smoke detector features a pivoting housing that fits both square and rectangular footprints and mounts to round or rectangular ductwork. This unit senses smoke in the most challenging conditions, operating in airflow speeds of 100 to 4,000 feet per minute, temperatures of –4°F to 158°F, and a humidity range of 0 to 95 percent (noncondensing). A plug-in sensor head offers improved false alarm immunity and simple installation, testing, and maintenance. An improved cover design isolates the sensor head from the low-flow feature for simple maintenance.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195190092011,"sku":"674179","price":296.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-D4120.jpg?v=1786476770"},{"product_id":"system-sensor-dh400oe-1-smoke-detector-duct-smoke-detector-outdoor","title":"System Sensor DH400OE-1 - Smoke Detector - Duct Smoke Detector, Outdoor","description":"System Sensor DH400OE-1 | Enclosure, Duct Smoke Detector, Weatherproof\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe DH400OE-1 all-weather outdoor enclosure is specifically designed to protect the System Sensor duct smoke detector from harsh elements. This enclosure provides protection in outdoor installations against rain, sleet, and snow or indoors against drip ping water.\u003c\/p\u003e\u003cp\u003eThis pre-drilled enclosure comes factory ready to fit any System Sensor duct smoke detector. Fabricated from durable 14-gauge galvanized steel, the enclosure has a durable gray, polyester, powder-coated finish for added protection against rust and corrosion.\u003c\/p\u003e\u003cp\u003eThe slip-on removable cover is secured with a pair of plated steel screws along the bottom edge.\u003c\/p\u003e\u003cp\u003eConvenient knock-outs are located along the bottom to facilitate the connection of all types of electrical conduits and casings. Scews are included for mounting the detector into the enclosure.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195190157547,"sku":"674196","price":499.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-DH400OE1.jpg?v=1786476770"},{"product_id":"system-sensor-co1224t-detector-carbon-monoxide-detector","title":"System Sensor CO1224T - Detector - Carbon Monoxide Detector","description":"System Sensor CO1224T | Carbon Monoxide Detector, 12\/24 V DC, with Sounder and Trouble Relay with Test Function\u003cbr\u003e\u003cbr\u003e\u003cp\u003eWith RealTest technology, the CO gas sensing cell used in the CO1224T and CO1224TR CO detectors can be tested using a CO gas agent, fully meeting the requirements of NFPA 720: 2009. Simply put the detector into RealTest mode, spray a small amount of C O into the detector per the installation instructions, and within seconds the detector will alarm, indicating successful gas entry.\u003c\/p\u003e\u003cp\u003eWhen dangerous amounts of CO are detected, the CO1224T and CO1224TR detectors alert residents by sounding and flasng a temp 4 signal alarm. With 24\/7 central station monitoring, residents are guaranteed protection whether they are away from home, sleeping, or already suffering from the effects of CO.\u003c\/p\u003e\u003cp\u003eThe CO1224T and CO1224TR are designed for system operationThese detectors are fully listed to UL 2075 and offer a code-required trouble relay to send a sensor failure or end-of-life signal to the control panel and the central station. The CO1224T and CO1224TR also use SEMS-type terminal Philips head screws fo r quicker and more positive wiring connections and code-required wiring supervision. With a low current draw, these detectors enable more devices to be connected to the panel, limiting the need to purchase extra power supplies or more expensive panels. As 12\/24 V DC detectors, the CO1224T and CO1224TR will operate on most industry security and fire alarm control panels.\u003c\/p\u003e\u003cp\u003eWith RealTest technology, the CO gas sensing cell used in the CO1224T CO detector can be tested using a CO gas agent, fully meeting the requirements of NFPA 720: 2009. Simply put the detector into RealTest mode, spray a small amount of C O into the detector per the installation instructions, and within seconds the detector will alarm, indicating successful gas entry. When dangerous amounts of CO are detected, the CO1224T detector alert residents by sounding and flasng a temp 4 signal alarm. With 24\/7 central station monitoring, residents are guaranteed protection whether they are away from home, sleeping, or already suffering from the effects of CO.\u003c\/p\u003e\u003cp\u003eThe CO1224T is designed for system operationThese detectors are fully listed to UL 2075 and offer a code-required trouble relay to send a sensor failure or end-of-life signal to the control panel and the central station. The CO1224T also uses SEMS-type terminal Philips head screws fo r quicker and more positive wiring connections and code-required wiring supervision. With a low current draw, these detectors enable more devices to be connected to the panel, limiting the need to purchase extra power supplies or more expensive panels. As 12\/24 V DC detectors, CO1224T will operate on most industry security and fire alarm control panels.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195190780139,"sku":"674166","price":116.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-CO1224T.jpg?v=1786476774"},{"product_id":"system-sensor-5603-detector-conventional-heat-detector","title":"System Sensor 5603 - Detector - Conventional Heat Detector,","description":"System Sensor 5603 | Heat Detector, 135F Fixed Temperature, Single-circuit Mechanical\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single- and dual-circuit models are available for low- and high-temperature ratings with either fixed temperature or combination fixed temperature\/r ate-of-rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field-testing.\u003c\/p\u003e\u003cp\u003eTo satisfy a variety of installation needs, the 5600 series easily mounts to single-gang and octagonal back boxes. And these models accommodate four-square back boxes, when used with a square to round plaster ring. The reversible mounting bracket permits both flush- and surface-mount back box installations.\u003c\/p\u003e\u003cp\u003eThe 5600 series provides clear markings on the exterior of the unit to ensure that the proper detector is being used. Alphanumeric characters identify the activation method, as well as the temperature rating, in Fahrenheit and Celsius degrees. Fixed temperature models are identified FX, while combination fixed\/ rate-of-rise unit s are marked FX\/ROR. The 5600 series also provides a post-activation indicator in the form of a collector. When the detector is activated, the collector drops from the unit, making it easy to identify the unit in alarm.\u003c\/p\u003e\u003cp\u003eMultiple configurations. The 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single- and dual-circuit models are available for low- and hightemperature ratings with either fixed temperature or combination fixed temperature\/rate-of-rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field-testing.\u003c\/p\u003e\u003cp\u003eInstallation flexibility. To satisfy a variety of installation needs, the 5600 series easily mounts to single-gang and octagonal back boxes. And these models accommodate four-square back boxes, when used with a square to round plaster ring. The reversible mounting bracket permits both flush- and surface-mount back box installations.\u003c\/p\u003e\u003cp\u003eVisual identification. The 5600 series provides clear markings on the exterior of the unit to ensure that the proper detector is being used. Alphanumeric characters identify the activation method, as well as the temperature rating, in Fahrenheit and Celsius degrees. Fixed temperature models are identified FX, while combination fixed\/ rate-of-rise units are marked FX\/ROR. The 5600 series also provides a post-activation indicator in the form of a collector. When the detector is activated, the collector drops from the unit, making it easy to identify the unit in alarm.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195190976747,"sku":"674109","price":26.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-5603.jpg?v=1786476774"},{"product_id":"system-sensor-5602-detector-conventional-heat-detector","title":"System Sensor 5602 - Detector - Conventional Heat Detector,","description":"System Sensor 5602 | Heat Detector, 194F Fixed\/Rate of rise, Single-circuit Mechanical\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single- and dual-circuit models are available for low- and high-temperature ratings with either fixed temperature or combination fixed temperature\/r ate-of-rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field-testing.\u003c\/p\u003e\u003cp\u003eTo satisfy a variety of installation needs, the 5600 series easily mounts to single-gang and octagonal back boxes. And these models accommodate four-square back boxes, when used with a square to round plaster ring. The reversible mounting bracket permits both flush- and surface-mount back box installations.\u003c\/p\u003e\u003cp\u003eThe 5600 series provides clear markings on the exterior of the unit to ensure that the proper detector is being used. Alphanumeric characters identify the activation method, as well as the temperature rating, in Fahrenheit and Celsius degrees. Fixed temperature models are identified FX, while combination fixed\/ rate-of-rise unit s are marked FX\/ROR. The 5600 series also provides a post-activation indicator in the form of a collector. When the detector is activated, the collector drops from the unit, making it easy to identify the unit in alarm.\u003c\/p\u003e\u003cp\u003eThe 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single and dualcircuit models are available for low and high temperature ratings with either fixed temperature or combination fixed temperature rate of rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field testing.System Sensor’s 5600 series mechanical heat detectors offer a low-cost means for property protection against fire, and for non-life-safety installations where smoke detectors are inappropriate.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195190943979,"sku":"674108","price":26.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-5602.jpg?v=1786476774"},{"product_id":"system-sensor-5621-detector-conventional-heat-detector","title":"System Sensor 5621 - Detector - Conventional Heat Detector,","description":"System Sensor 5621 | 135°F Fixed Temp\/Rate-of-Rise, Dual-Circuit Mechanical Heat Detector\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single- and dual-circuit models are available for low- and high-temperature ratings with either fixed temperature or combination fixed temperature\/r ate-of-rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field-testing.\u003c\/p\u003e\u003cp\u003eTo satisfy a variety of installation needs, the 5600 series easily mounts to single-gang and octagonal back boxes. And these models accommodate four-square back boxes, when used with a square to round plaster ring. The reversible mounting bracket permits both flush- and surface-mount back box installations.\u003c\/p\u003e\u003cp\u003eThe 5600 series provides clear markings on the exterior of the unit to ensure that the proper detector is being used. Alphanumeric characters identify the activation method, as well as the temperature rating, in Fahrenheit and Celsius degrees. Fixed temperature models are identified FX, while combination fixed\/ rate-of-rise unit s are marked FX\/ROR. The 5600 series also provides a post-activation indicator in the form of a collector. When the detector is activated, the collector drops from the unit, making it easy to identify the unit in alarm.\u003c\/p\u003e\u003cp\u003eThe 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single and dualcircuit models are available for low and high temperature ratings with either fixed temperature or combination fixed temperature rate of rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field testing.\u003c\/p\u003e\u003cp\u003eSystem Sensor’s 5600 series mechanical heat detectors offer a low-cost means for property protection against fire, and for non-life-safety installations where smoke detectors are inappropriate.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195191468267,"sku":"674111","price":45.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-5621.jpg?v=1786476777"},{"product_id":"system-sensor-5604-detector-conventional-heat-detector","title":"System Sensor 5604 - Detector - Conventional Heat Detector,","description":"System Sensor 5604 | Heat Detector, 194F Fixed Temperature, Single-circuit Mechanical\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single- and dual-circuit models are available for low- and high-temperature ratings with either fixed temperature or combination fixed temperature\/r ate-of-rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field-testing.\u003c\/p\u003e\u003cp\u003eTo satisfy a variety of installation needs, the 5600 series easily mounts to single-gang and octagonal back boxes. And these models accommodate four-square back boxes, when used with a square to round plaster ring. The reversible mounting bracket permits both flush- and surface-mount back box installations.\u003c\/p\u003e\u003cp\u003eThe 5600 series provides clear markings on the exterior of the unit to ensure that the proper detector is being used. Alphanumeric characters identify the activation method, as well as the temperature rating, in Fahrenheit and Celsius degrees. Fixed temperature models are identified FX, while combination fixed\/ rate-of-rise unit s are marked FX\/ROR. The 5600 series also provides a post-activation indicator in the form of a collector. When the detector is activated, the collector drops from the unit, making it easy to identify the unit in alarm.\u003c\/p\u003e\u003cp\u003eMultiple configurations. The 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single- and dual-circuit models are available for low- and hightemperature ratings with either fixed temperature or combination fixed temperature\/rate-of-rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field-testing.\u003c\/p\u003e\u003cp\u003eInstallation flexibility. To satisfy a variety of installation needs, the 5600 series easily mounts to single-gang and octagonal back boxes. And these models accommodate four-square back boxes, when used with a square to round plaster ring. The reversible mounting bracket permits both flush- and surface-mount back box installations.\u003c\/p\u003e\u003cp\u003eVisual identification. The 5600 series provides clear markings on the exterior of the unit to ensure that the proper detector is being used. Alphanumeric characters identify the activation method, as well as the temperature rating, in Fahrenheit and Celsius degrees. Fixed temperature models are identified FX, while combination fixed\/ rate-of-rise units are marked FX\/ROR. The 5600 series also provides a post-activation indicator in the form of a collector. When the detector is activated, the collector drops from the unit, making it easy to identify the unit in alarm.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195191501035,"sku":"674110","price":26.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-5604.jpg?v=1786476777"},{"product_id":"system-sensor-5623-detector-conventional-heat-detector","title":"System Sensor 5623 - Detector - Conventional Heat Detector,","description":"System Sensor 5623 | 135°F Fixed Temp, Dual-Circuit Mechanical Heat Detector\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single- and dual-circuit models are available for low- and high-temperature ratings with either fixed temperature or combination fixed temperature\/r ate-of-rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field-testing.\u003c\/p\u003e\u003cp\u003eTo satisfy a variety of installation needs, the 5600 series easily mounts to single-gang and octagonal back boxes. And these models accommodate four-square back boxes, when used with a square to round plaster ring. The reversible mounting bracket permits both flush- and surface-mount back box installations.\u003c\/p\u003e\u003cp\u003eThe 5600 series provides clear markings on the exterior of the unit to ensure that the proper detector is being used. Alphanumeric characters identify the activation method, as well as the temperature rating, in Fahrenheit and Celsius degrees. Fixed temperature models are identified FX, while combination fixed\/ rate-of-rise unit s are marked FX\/ROR. The 5600 series also provides a post-activation indicator in the form of a collector. When the detector is activated, the collector drops from the unit, making it easy to identify the unit in alarm.\u003c\/p\u003e\u003cp\u003eMultiple configurations. The 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single- and dual-circuit models are available for low- and hightemperature ratings with either fixed temperature or combination fixed temperature\/rate-of-rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field-testing.\u003c\/p\u003e\u003cp\u003eInstallation flexibility. To satisfy a variety of installation needs, the 5600 series easily mounts to single-gang and octagonal back boxes. And these models accommodate four-square back boxes, when used with a square to round plaster ring. The reversible mounting bracket permits both flush- and surface-mount back box installations.\u003c\/p\u003e\u003cp\u003eVisual identification. The 5600 series provides clear markings on the exterior of the unit to ensure that the proper detector is being used. Alphanumeric characters identify the activation method, as well as the temperature rating, in Fahrenheit and Celsius degrees. Fixed temperature models are identified FX, while combination fixed\/ rate-of-rise units are marked FX\/ROR. The 5600 series also provides a post-activation indicator in the form of a collector. When the detector is activated, the collector drops from the unit, making it easy to identify the unit in alarm\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195191533803,"sku":"674113","price":47.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-5623.jpg?v=1786476777"},{"product_id":"system-sensor-5624-detector-conventional-heat-detector","title":"System Sensor 5624 - Detector - Conventional Heat Detector,","description":"System Sensor 5624 | 194°F Fixed Temp, Dual-Circuit Mechanical Heat Detector\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single- and dual-circuit models are available for low- and high-temperature ratings with either fixed temperature or combination fixed temperature\/r ate-of-rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field-testing.\u003c\/p\u003e\u003cp\u003eTo satisfy a variety of installation needs, the 5600 series easily mounts to single-gang and octagonal back boxes. And these models accommodate four-square back boxes, when used with a square to round plaster ring. The reversible mounting bracket permits both flush- and surface-mount back box installations.\u003c\/p\u003e\u003cp\u003eThe 5600 series provides clear markings on the exterior of the unit to ensure that the proper detector is being used. Alphanumeric characters identify the activation method, as well as the temperature rating, in Fahrenheit and Celsius degrees. Fixed temperature models are identified FX, while combination fixed\/ rate-of-rise unit s are marked FX\/ROR. The 5600 series also provides a post-activation indicator in the form of a collector. When the detector is activated, the collector drops from the unit, making it easy to identify the unit in alarm.\u003c\/p\u003e\u003cp\u003eThe 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single- and dual-circuit models are available for low- and hightemperature ratings with either fixed temperature or combination fixed temperature\/rate-of-rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field-testing. To satisfy a variety of installation needs, the 5600 series easily mounts to single-gang and octagonal back boxes. And these models accommodate four-square back boxes, when used with a square to round plaster ring. The reversible mounting bracket permits both flush- and surface-mount back box installations.\u003c\/p\u003e\u003cp\u003eThe 5600 series provides clear markings on the exterior of the unit to ensure that the proper detector is being used. Alphanumeric characters identify the activation method, as well as the temperature rating, in Fahrenheit and Celsius degrees. Fixed temperature models are identified FX, while combination fixed\/ rate-of-rise units are marked FX\/ROR. The 5600 series also provides a post-activation indicator in the form of a collector. When the detector is activated, the collector drops from the unit, making it easy to identify the unit in alarm.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195191599339,"sku":"674114","price":48.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-5624.jpg?v=1786476777"},{"product_id":"system-sensor-2d51-detector-4-wire-duct-photo-detector","title":"System Sensor 2D51 - Detector - 4-Wire Duct Photo Detector","description":"System Sensor 2D51 | Smoke Detector, 4-wire, Photoelectronic\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 2D51 can be used as a pendant mount detector in no-flow\/ low-flow air-handling systems (0-4,000 FPM). The pendant \/plenum mounted 2D51 is to be installed into a B210LP base and wired to a D4P120 power board-only control unit. The D4P120 power board is capable of controlling up to two 2D51 sensors.\u003c\/p\u003e\u003cp\u003ePendant mounted in a standard electrical box within the duct, the twist-in\/twist-out head allows easy removal from the base for quick cleaning and maintenance. The 2D51 heads can be locally tested using a magnet or by using the test\/reset push button on the D4P120 power board.\u003c\/p\u003e\u003cp\u003eRemote testing is accomplished using the RTS151, RTS151KEY, RTS-2 or RTS-AOS accessories connected to the D4P120 power board.\u003c\/p\u003e\u003cp\u003eThe APA151, RTS2 and RTS2-AOS Remote Annuiators with Piezo Alarm can also be connected to the D4P120 power board to provide an audible and visible indication of smoke detector status.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195193237739,"sku":"674090","price":110.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-2D51.jpg?v=1786476786"},{"product_id":"system-sensor-2w-b-detector-i3-series-detector-2-wire","title":"System Sensor 2W-B - Detector - I3 Series Detector, 2-Wire,","description":"System Sensor 2W-B | i3 Series Detector, 2-wire, 12\/24 V DC, with Base\u003cbr\u003e\u003cbr\u003e\u003cp\u003eInstallation ease. The i3 line redefines installation ease with its plug-in design. This allows an installer to pre-wire bases (included with heads). The large wire entry port and in-line terminals provide ample room for neatly routing the wiring insid e the base. The base accommodates a variety of back box mounting methods as well as direct mounting with drywall anchors. To complete the installation, i3 heads plug into the base with a simple Stop-Drop ’N Lock(TM) action.\u003c\/p\u003e\u003cp\u003eIntelligence. i3 detectors offer a number of intelligent features to simplify testing and maintenance. Drift compensation and smoothing algorithms are standard with the i3 line to minimize nuisance alarms. 2-wire i3 detectors can generate a remote LEDindicated maintenance signa l when connected to the 2W-MOD2 loop test\/maintenance module or a panel equipped with the i3 protocol. The SENS-RDR, a wireless device, displays the sensitivityof i3 detectors in terms of percent-per-foot obscuration.\u003c\/p\u003e\u003cp\u003eInstant inspection. The i3 series provides wide-angle red and green LED indicators for instant inspection of the detector’s condition: normal standby, out-of-sensitivity, alarm, or freeze trouble. When connected to the 2W-MOD2 loop test\/maintenance module or a panel with the i3 proto col, the EZ Walk loop test feature is available on 2-wire i3 detectors. This feature verifies the initiating loop wiring by providing LED status indication at each detector.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195193434347,"sku":"674092","price":68.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-2WB.jpg?v=1786476787"},{"product_id":"system-sensor-2wta-b-i3-series-detector-2-wire-12-24-v-dc-thermal-sounder-with-base","title":"System Sensor 2WTA-B - I3 Series Detector, 2-Wire, 12\/24 V Dc, Thermal, Sounder, With Base","description":"System Sensor 2WTA-B | i3 Series Detector, 2-wire, 12\/24 V DC, Thermal, Sounder, with Base\u003cbr\u003e\u003cbr\u003e\u003cp\u003eInstallation ease: Throughout the i3 series, installation is simple with its installer-friendly base and plug-in design. The base accommodates a broad range of back box and direct mounting options and provides ample space for pre-wiring the device. To complete the installation, the i3 detector plugs into its base with a simple Stop-Drop ’N Lock action.\u003c\/p\u003e\u003cp\u003eIntelligence: To reduce the likelihood of nuisance alarms, all i3 detectors are equipped with both drift compensation and smoothing algorithms. These capabilities minimize both short- and long-term causes of nuisance alarms, such as RF interference and dust accumulation. When connected to the 2W-MOD2 loop test\/ maintenance module or an i3 Ready(TM) panel, 2 wire i3 detectors can generate a remote maintenance signal when in a maintenance or freeze trouble condition. To measure the sensitivity of any i3 detector, the SENS-RDR displays the reading, in terms of percent-per-foot obscuration, within seconds.\u003c\/p\u003e\u003cp\u003eInstant inspection: i3 has red and green LEDs to simplify local status indication during power-up, standby, alarm, maintenance, and freeze trouble conditions. When in alarm, i3 sounder models generate an 85 dB temporal tone. If connected to the RRS-MOD reversing relay\/synchronization module , all i3 sounders on the loop will activate when one detector is in alarm. The RRS-MOD also synchronizes i3 sounder output to ensure a clear audible signal.\u003c\/p\u003e\u003cp\u003eShould the application call for differentiating between a local and a general alarm, the i3 line offers an isolated thermal model, which initiates a local alarm when smoke is detected, and a general alarm when the thermal sensor is activated.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195193762027,"sku":"674093","price":44.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-2WTAB.jpg?v=1786476790"},{"product_id":"system-sensor-2wt-b-detector-i3-series-detector-2-wire","title":"System Sensor 2WT-B - Detector - I3 Series Detector, 2-Wire,","description":"System Sensor 2WT-B | i3 Series Detector, 2-wire, 12\/24 V DC, Thermal, with Base\u003cbr\u003e\u003cbr\u003e\u003cp\u003eInstallation ease. The i3 line redefines installation ease with its plug-in design. This allows an installer to pre-wire bases (included with heads). The large wire entry port and in-line terminals provide ample room for neatly routing the wiring insid e the base. The base accommodates a variety of back box mounting methods as well as direct mounting with drywall anchors. To complete the installation, i3 heads plug into the base with a simple Stop-Drop ’N Lock(TM) action.\u003c\/p\u003e\u003cp\u003eIntelligence. i3 detectors offer a number of intelligent features to simplify testing and maintenance. Drift compensation and smoothing algorithms are standard with the i3 line to minimize nuisance alarms. 2-wire i3 detectors can generate a remote LEDindicated maintenance signa l when connected to the 2W-MOD2 loop test\/maintenance module or a panel equipped with the i3 protocol. The SENS-RDR, a wireless device, displays the sensitivityof i3 detectors in terms of percent-per-foot obscuration.\u003c\/p\u003e\u003cp\u003eInstant inspection. The i3 series provides wide-angle red and green LED indicators for instant inspection of the detector’s condition: normal standby, out-of-sensitivity, alarm, or freeze trouble. When connected to the 2W-MOD2 loop test\/maintenance module or a panel with the i3 proto col, the EZ Walk loop test feature is available on 2-wire i3 detectors. This feature verifies the initiating loop wiring by providing LED status indication at each detector.\u003c\/p\u003e\u003cp\u003eThe System Sensor 2WT-B is a 2-wire, photoelectric i3 smoke and heat detector. System Sensor i3 series smoke detectors represent a significant advancement in conventional detection. The i3 family is founded on three principles: installation ease, intelligence, and instant inspection.\u003c\/p\u003e\u003cp\u003eThe i3 line redefines installation ease with its plug-in design. This allows an installer to pre-wire bases (included with heads). The large wire entry port and in-line terminals provide ample room for neatly routing the wiring inside the base. The base accommodates a variety of back box mounting methods as well as direct mounting with drywall anchors. To complete the installation, i3 heads plug into the base with a simple Stop-Drop ‘N Lock action.\u003c\/p\u003e\u003cp\u003ei3 detectors offer a number of intelligent features to simplify testing and maintenance. Drift compensation and smoothing algorithms are standard with the i3 line to minimize nuisance alarms. 2-wire i3 detectors can generate a remote LED indicated maintenance signal when connected to the 2W-MOD2 loop test\/maintenance module or a panel equipped with the i3 protocol. The SENS-RDR, a wireless device, displays the sensitivity of i3 detectors in terms of percent-per-foot obscuration.\u003c\/p\u003e\u003cp\u003eThe i3 series provides wide-angle red and green LED indicators for instant inspection of the detector’s condition: normal standby, out-of-sensitivity, alarm, or freeze trouble. When connected to the 2W-MOD2 loop test\/maintenance module or a panel with the i3 protocol, the EZ Walk loop test feature is available on 2-wire i3 detectors. This feature verifies the initiating loop wiring by providing LED status indication at each detector.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195193925867,"sku":"674094","price":74.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-2WTB.jpg?v=1786476790"},{"product_id":"system-sensor-4w-b-photoelectric-i3-smoke-detector-4-wire","title":"System Sensor 4W-B - Photoelectric I3 Smoke Detector, 4-Wire","description":"System Sensor 4W-B | i3 Series Detector, 4-wire, 12\/24 V DC, with Base\u003cbr\u003e\u003cbr\u003e\u003cp\u003eInstallation ease. The i3 line redefines installation ease with its plug-in design. This allows an installer to pre-wire bases (included with heads). The large wire entry port and in-line terminals provide ample room for neatly routing the wiring insid e the base. The base accommodates a variety of back box mounting methods as well as direct mounting with drywall anchors. To complete the installation, i3 heads plug into the base with a simple Stop-Drop ’N Lock(TM) action.\u003c\/p\u003e\u003cp\u003eIntelligence. i3 detectors offer a number of intelligent features to simplify testing and maintenance. Drift compensation and smoothing algorithms are standard with the i3 line to minimize nuisance alarms. 2-wire i3 detectors can generate a remote LEDindicated maintenance signa l when connected to the 2W-MOD2 loop test\/maintenance module or a panel equipped with the i3 protocol. The SENS-RDR, a wireless device, displays the sensitivityof i3 detectors in terms of percent-per-foot obscuration.\u003c\/p\u003e\u003cp\u003eInstant inspection. The i3 series provides wide-angle red and green LED indicators for instant inspection of the detector’s condition: normal standby, out-of-sensitivity, alarm, or freeze trouble. When connected to the 2W-MOD2 loop test\/maintenance module or a panel with the i3 proto col, the EZ Walk loop test feature is available on 2-wire i3 detectors. This feature verifies the initiating loop wiring by providing LED status indication at each detector.\u003c\/p\u003e\u003cp\u003eSystem Sensor 4WB The 4W-B is a 4-wire, photoelectric i3 smoke detector. System Sensor i3 series smoke detectors represent significant advancement in conventional detection. The i3 family is founded on three principles: installation ease, intelligence, and instant inspection.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195193958635,"sku":"674097","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-4WB.jpg?v=1786476790"},{"product_id":"system-sensor-2wtr-b-detector-i3-series-detector-2-wire","title":"System Sensor 2WTR-B - Detector - I3 Series Detector, 2-Wire,","description":"System Sensor 2WTR-B | i3 Series Detector, 2-wire, 12\/24 V DC, Thermal, Relay, with Base\u003cbr\u003e\u003cbr\u003e\u003cp\u003eInstallation ease: Throughout the i3 series, installation is simple with its installer-friendly base and plug-in design. The base accommodates a broad range of back box and direct mounting options and provides ample space for pre-wiring the device. To complete the installation, the i3 detector plugs into its base with a simple Stop-Drop ’N Lock action.\u003c\/p\u003e\u003cp\u003eIntelligence: To reduce the likelihood of nuisance alarms, all i3 detectors are equipped with both drift compensation and smoothing algorithms. These capabilities minimize both short- and long-term causes of nuisance alarms, such as RF interference and dust accumulation. When connected to the 2W-MOD2 loop test\/ maintenance module or an i3 Ready(TM) panel, 2 wire i3 detectors can generate a remote maintenance signal when in a maintenance or freeze trouble condition. To measure the sensitivity of any i3 detector, the SENS-RDR displays the reading, in terms of percent-per-foot obscuration, within seconds.\u003c\/p\u003e\u003cp\u003eInstant inspection: i3 has red and green LEDs to simplify local status indication during power-up, standby, alarm, maintenance, and freeze trouble conditions. When in alarm, i3 sounder models generate an 85 dB temporal tone. If connected to the RRS-MOD reversing relay\/synchronization module , all i3 sounders on the loop will activate when one detector is in alarm. The RRS-MOD also synchronizes i3 sounder output to ensure a clear audible signal.\u003c\/p\u003e\u003cp\u003eShould the application call for differentiating between a local and a general alarm, the i3 line offers an isolated thermal model, which initiates a local alarm when smoke is detected, and a general alarm when the thermal sensor is activated.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195194056939,"sku":"674095","price":100.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-2WTRB.jpg?v=1786476791"},{"product_id":"system-sensor-4wta-b-detector-i3-series-detector-4-wire","title":"System Sensor 4WTA-B - Detector - I3 Series Detector, 4-Wire,","description":"System Sensor 4WTA-B | i3 Series Detector, 4-wire, 12\/24 V DC, Thermal, Sounder, with Base\u003cbr\u003e\u003cbr\u003e\u003cp\u003eInstallation ease: Throughout the i3 series, installation is simple with its installer-friendly base and plug-in design. The base accommodates a broad range of back box and direct mounting options and provides ample space for pre-wiring the device. To complete the installation, the i3 detector plugs into its base with a simple Stop-Drop ’N Lock action.\u003c\/p\u003e\u003cp\u003eIntelligence: To reduce the likelihood of nuisance alarms, all i3 detectors are equipped with both drift compensation and smoothing algorithms. These capabilities minimize both short- and long-term causes of nuisance alarms, such as RF interference and dust accumulation. When connected to the 2W-MOD2 loop test\/ maintenance module or an i3 Ready(TM) panel, 2 wire i3 detectors can generate a remote maintenance signal when in a maintenance or freeze trouble condition. To measure the sensitivity of any i3 detector, the SENS-RDR displays the reading, in terms of percent-per-foot obscuration, within seconds.\u003c\/p\u003e\u003cp\u003eInstant inspection: i3 has red and green LEDs to simplify local status indication during power-up, standby, alarm, maintenance, and freeze trouble conditions. When in alarm, i3 sounder models generate an 85 dB temporal tone. If connected to the RRS-MOD reversing relay\/synchronization module , all i3 sounders on the loop will activate when one detector is in alarm. The RRS-MOD also synchronizes i3 sounder output to ensure a clear audible signal.\u003c\/p\u003e\u003cp\u003eShould the application call for differentiating between a local and a general alarm, the i3 line offers an isolated thermal model, which initiates a local alarm when smoke is detected, and a general alarm when the thermal sensor is activated.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195194319083,"sku":"674099","price":99.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-4WTAB.jpg?v=1786476792"},{"product_id":"system-sensor-4wtar-b-detector-i3-series-detector-4-wire","title":"System Sensor 4WTAR-B - Detector - I3 Series Detector, 4-Wire,","description":"System Sensor 4WTAR-B | i3 Series Detector, 4-wire, 12\/24 V DC, Thermal, Sounder, Relay with Base\u003cbr\u003e\u003cbr\u003e\u003cp\u003eInstallation ease: Throughout the i3 series, installation is simple with its installer-friendly base and plug-in design. The base accommodates a broad range of back box and direct mounting options and provides ample space for pre-wiring the device. To complete the installation, the i3 detector plugs into its base with a simple Stop-Drop ’N Lock action.\u003c\/p\u003e\u003cp\u003eIntelligence: To reduce the likelihood of nuisance alarms, all i3 detectors are equipped with both drift compensation and smoothing algorithms. These capabilities minimize both short- and long-term causes of nuisance alarms, such as RF interference and dust accumulation. When connected to the 2W-MOD2 loop test\/ maintenance module or an i3 Ready(TM) panel, 2 wire i3 detectors can generate a remote maintenance signal when in a maintenance or freeze trouble condition. To measure the sensitivity of any i3 detector, the SENS-RDR displays the reading, in terms of percent-per-foot obscuration, within seconds.\u003c\/p\u003e\u003cp\u003eInstant inspection: i3 has red and green LEDs to simplify local status indication during power-up, standby, alarm, maintenance, and freeze trouble conditions. When in alarm, i3 sounder models generate an 85 dB temporal tone. If connected to the RRS-MOD reversing relay\/synchronization module , all i3 sounders on the loop will activate when one detector is in alarm. The RRS-MOD also synchronizes i3 sounder output to ensure a clear audible signal.\u003c\/p\u003e\u003cp\u003eShould the application call for differentiating between a local and a general alarm, the i3 line offers an isolated thermal model, which initiates a local alarm when smoke is detected, and a general alarm when the thermal sensor is activated.\u003c\/p\u003e\u003cp\u003eSystem Sensor i3 sounder and relay smoke detectors apply the guiding principles of installation ease, intelligence, and instant inspection in a series of specialty conventional devices.\u003c\/p\u003e\u003cp\u003eTo reduce the likelihood of nuisance alarms, all i3 detectors are equipped with both drift compensation and smoothing algorithms. These capabilities minimize both short- and long-term causes of nuisance alarms, such as RF interference and dust accumulation. When connected to the 2W-MOD2 loop test\/ maintenance module or an i3 Ready panel, 2-wire i3 detectors can generate a remote maintenance signal when in a maintenance or freeze trouble condition. To measure the sensitivity of any i3 detector, the SENS-RDR displays the reading, in terms of percent-per-foot obscuration, within seconds.\u003c\/p\u003e\u003cp\u003ei3 has red and green LEDs to simplify local status indication during power-up, standby, alarm, maintenance, and freeze trouble conditions. When in alarm, i3 sounder models generate an 85 dB temporal tone. If connected to the RRS-MOD reversing relay\/synchronization module, all i3 sounders on the loop will activate when one detector is in alarm. The RRS-MOD also synchronizes i3 sounder output to ensure a clear audible signal\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195194646763,"sku":"674100","price":111.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-4WTARB.jpg?v=1786476793"},{"product_id":"system-sensor-4wt-b-detector-i3-series-detector-4-wire","title":"System Sensor 4WT-B - Detector - I3 Series Detector, 4-Wire,","description":"System Sensor 4WT-B | i3 Series Detector, 4-wire, 12\/24 V DC, Thermal, with Base\u003cbr\u003e\u003cbr\u003e\u003cp\u003eInstallation ease. The i3 line redefines installation ease with its plug-in design. This allows an installer to pre-wire bases (included with heads). The large wire entry port and in-line terminals provide ample room for neatly routing the wiring insid e the base. The base accommodates a variety of back box mounting methods as well as direct mounting with drywall anchors. To complete the installation, i3 heads plug into the base with a simple Stop-Drop ’N Lock(TM) action.\u003c\/p\u003e\u003cp\u003eIntelligence. i3 detectors offer a number of intelligent features to simplify testing and maintenance. Drift compensation and smoothing algorithms are standard with the i3 line to minimize nuisance alarms. 2-wire i3 detectors can generate a remote LEDindicated maintenance signa l when connected to the 2W-MOD2 loop test\/maintenance module or a panel equipped with the i3 protocol. The SENS-RDR, a wireless device, displays the sensitivityof i3 detectors in terms of percent-per-foot obscuration.\u003c\/p\u003e\u003cp\u003eInstant inspection. The i3 series provides wide-angle red and green LED indicators for instant inspection of the detector’s condition: normal standby, out-of-sensitivity, alarm, or freeze trouble. When connected to the 2W-MOD2 loop test\/maintenance module or a panel with the i3 proto col, the EZ Walk loop test feature is available on 2-wire i3 detectors. This feature verifies the initiating loop wiring by providing LED status indication at each detector.\u003c\/p\u003e\u003cp\u003eThe 4WT-B is a 4-wire, photoelectric i3 smoke detector with a 135°F fixed thermal sensor.\u003c\/p\u003e\u003cp\u003eSystem Sensor i3 series smoke detectors represent significant advancement in conventional detection. The i3 family is founded on three principles: installation ease, intelligence, and instant inspection.\u003c\/p\u003e\u003cp\u003eThe i3 line redefines installation ease with its plug-in design. This allows an installer to pre-wire bases (included with heads). The large wire entry port and in-line terminals provide ample room for neatly routing the wiring inside the base. The base accommodates a variety of back box mounting methods as well as direct mounting with drywall anchors. To complete the installation, i3 heads plug into the base with a simple Stop-Drop ’N Lock action.\u003c\/p\u003e\u003cp\u003ei3 detectors offer a number of intelligent features to simplify testing and maintenance. Drift compensation and smoothing algorithms are standard with the i3 line to minimize nuisance alarms. 2-wire i3 detectors can generate a remote LED indicated maintenance signal when connected to the 2W-MOD2 loop test\/maintenance module or a panel equipped with the i3 protocol. The SENS-RDR, a wireless device, displays the sensitivity of i3 detectors in terms of percent-per-foot obscuration.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195194679531,"sku":"674101","price":80.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-4WTB.jpg?v=1786476793"},{"product_id":"system-sensor-4wtr-b-detector-i3-series-detector-4-wire","title":"System Sensor 4WTR-B - Detector - I3 Series Detector, 4-Wire,","description":"System Sensor 4WTR-B | i3 Series Detector, 4-wire, 12\/24 V DC, Thermal, Relay, with Base\u003cbr\u003e\u003cbr\u003e\u003cp\u003eInstallation ease: Throughout the i3 series, installation is simple with its installer-friendly base and plug-in design. The base accommodates a broad range of back box and direct mounting options and provides ample space for pre-wiring the device. To complete the installation, the i3 detector plugs into its base with a simple Stop-Drop ’N Lock action.\u003c\/p\u003e\u003cp\u003eIntelligence: To reduce the likelihood of nuisance alarms, all i3 detectors are equipped with both drift compensation and smoothing algorithms. These capabilities minimize both short- and long-term causes of nuisance alarms, such as RF interference and dust accumulation. When connected to the 2W-MOD2 loop test\/ maintenance module or an i3 Ready(TM) panel, 2 wire i3 detectors can generate a remote maintenance signal when in a maintenance or freeze trouble condition. To measure the sensitivity of any i3 detector, the SENS-RDR displays the reading, in terms of percent-per-foot obscuration, within seconds.\u003c\/p\u003e\u003cp\u003eInstant inspection: i3 has red and green LEDs to simplify local status indication during power-up, standby, alarm, maintenance, and freeze trouble conditions. When in alarm, i3 sounder models generate an 85 dB temporal tone. If connected to the RRS-MOD reversing relay\/synchronization module , all i3 sounders on the loop will activate when one detector is in alarm. The RRS-MOD also synchronizes i3 sounder output to ensure a clear audible signal.\u003c\/p\u003e\u003cp\u003eShould the application call for differentiating between a local and a general alarm, the i3 line offers an isolated thermal model, which initiates a local alarm when smoke is detected, and a general alarm when the thermal sensor is activated.\u003c\/p\u003e\u003cp\u003eSystem Sensor i3 sounder and relay smoke detectors apply the guiding principles of installation ease, intelligence, and instant inspection in a series of specialty conventional devices. Throughout the i3 series, installation is simple with its installer-friendly base and plug-in design. The base accommodates a broad range of back box and direct mounting options and provides ample space for pre-wiring the device. To complete the installation, the i3 detector plugs into its base with a simple Stop-Drop 'N Lock action.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195194745067,"sku":"674102","price":105.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-4WTRB.jpg?v=1786476793"},{"product_id":"system-sensor-b112lp-base-base-4-wire-24-vdc-form-a","title":"System Sensor B112LP - Base - Base, 4-Wire, 24 Vdc, Form A","description":"System Sensor B112LP | Base, 4-wire, with Form A\u0026amp;C Relay Contacts, for 100 Series Smoke Detectors\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe Model B112LP detector base is designed for use with System Sensor models 2151 photo electronic and 1151 ionization detector heads. This two-wire base is equipped with screw terminals for the connection of power, ground, and an optional remote annunciator.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195200807147,"sku":"674128","price":64.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-B112LP.jpg?v=1786476826"},{"product_id":"system-sensor-b114lp-base-base-4-wire-120-vac-form-a","title":"System Sensor B114LP - Base - Base, 4-Wire, 120 Vac, Form A","description":"System Sensor B114LP | Base, 120 V AC, for 2151 Special Applications Duct Smoke Detector\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe model B114LP detector base is designed for use with System Sensor model 2151 photoelectronic and 1151 ionization detector heads. This four-wire base is equipped with screw terminals for the connection of power, ground, relay connections, and an optional RA400Z\/RA100Z remote annunciator. It also includes a resistor that limits current when the associated smoke detector is in the alarm state.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195200872683,"sku":"674129","price":193.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-B114LP.jpg?v=1786476826"},{"product_id":"system-sensor-b114lpbt-base-base-special-application","title":"System Sensor B114LPBT - Base - Base, Special Application","description":"System Sensor B114LPBT | 24VAC\/DC Detector Base for Use with 2151 Special Applications Duct Smoke Detector\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe B114LPBT detector base is designed for use with System Sensor model 2151 photoelectronic and 1151 ionization detector heads. The capability of plugging these detectors into a variety of special bases makes them more versatile than equivalent direct-wired models. Refer to the System Sensor catalog for other available plug-in bases. The B114LPBT base is intended for use in 4-wire systems with terminals provided for remote annunciator and relay connections.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195201298667,"sku":"674130","price":140.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-B114LPBT.jpg?v=1786476828"},{"product_id":"l-h-dottie-1000d-premium-fire-stop-caulking-compound","title":"L. H. Dottie 1000D | Premium Fire Stop Caulking Compound","description":"L. H. Dottie 1000D | Premium Fire Stop Caulking Compound\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 1000D is a water-based, flexible, highly intumescent sealant designed for use on metal, insulated fiberglass and plastic pipes. It can also be used for top of the wall construction joints, as well as power and telephone cables.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195201331435,"sku":"786327","price":36.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/L_H_Dottie_Company_1000D_Main-2350.jpg?v=1786476829"},{"product_id":"honeywell-silent-knight-sk-ip-2ud-fire-alarm-communicator-kit-24-volt-dc-155-milliampere-alarm-98-milliampere-standby-7-1-width-x-3-12-depth-x-8-44-height-includes-ipdact-2ud-ipenc","title":"Honeywell Silent Knight SK-IP-2UD | Fire Alarm Communicator Kit, 24 Volt Dc, 155 Milliampere Alarm, 98 Milliampere Standby, 7.1\" Width X 3.12\" Depth X 8.44\" Height, Includes Ipdact-2Ud, Ipenc","description":"Honeywell Silent Knight SKIP2UD | Fire Alarm Communicator Kit, 24 Volt Dc, 155 Milliampere Alarm, 98 Milliampere Standby, 7.1\" Width X 3.12\" Depth X 8.44\" Height, Includes Ipdact-2Ud, Ipenc","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195203985643,"sku":"785347","price":909.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Honeywell_Silent_Knight_SK-IP-2_Fire_Alarm_Communicator_Kit_main.jpg?v=1786476842"},{"product_id":"honeywell-silent-knight-sd500-anm-intelligent-addressable-notification-module-24-vdc-6-milliampere-standby-56-milliampere-alarm-2a-appliance-4-7-8-width-x-1-depth-x-4-7-8-height","title":"Honeywell Silent Knight SD500-ANM | Intelligent Addressable Notification Module, 24 Vdc, 6 Milliampere Standby, 56 Milliampere Alarm, 2A Appliance, 4-7\/8\" Width X 1\" Depth X 4-7\/8\" Height","description":"Honeywell Silent Knight SD500ANM | Intelligent Addressable Notification Module, 24 Vdc, 6 Milliampere Standby, 56 Milliampere Alarm, 2A Appliance, 4-7\/8\" Width X 1\" Depth X 4-7\/8\" Height\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSD500-ANM is an Addressable Notification Module designed for use with the IntelliKnight fire alarm control panel that provides you with additional notification circuits on the IntelliKnight SLC loop.\u003c\/p\u003e\u003cp\u003eThe SD500-ANM provides a single class A or B circuit that is controlled by the IntelliKnight's Signaling Line Circuit and is powered from a separate power supply.,\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195204083947,"sku":"698285","price":396.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Honeywell_Silent_Knight_SD500-ANM_Intelligent_Addressable_Notification_Module_main.jpg?v=1786476842"},{"product_id":"system-sensor-d2-smoke-detector-duct-smoke-detector","title":"System Sensor D2 - Smoke Detector - Duct Smoke Detector,","description":"System Sensor D2 | 2-Wire Photoelectric Duct Smoke Detector\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe InnovairFlex D2 2-wire photoelectric duct smoke detector features a pivoting housing that fits various applications: both square and rectangular footprints mount to round or rectangular duct work.\u003c\/p\u003e\u003cp\u003eThis new duct smoke detector senses airflow speeds ranging from 100 to 4,000 feet per minute with proven System Sensor precision. The enhancements built into this model improve false alarm immunity (with plug-in sensor head); broaden operating temperature (-4ºF to 158ºF) and humidity (0 to 95 percent n on-condensing) ranges; while simplifying installation and maintenance. These advance features can detect smoke even in the harshest duct applications.\u003c\/p\u003e\u003cp\u003eThe new design provides more wiring space with an added 3\/4 inch conduit knockout. Numbers and labels for terminal designations are consistent with previous Innovair models. The new sampling tube can be clicked into position with one smooth motion from either the front or the back of the detector.\u003c\/p\u003e\u003cp\u003eThe InnovairFlex D2 duct smoke detector has signals to indicate trouble and maintenance conditions. Additionally, a cover tamper feature is incorporated to indicate a trouble condition for removed or improperly installed sensor cover. An improved cover design, with an integrated the low-flow feature, isolates the sensor head from the low-flow technology for simple maintenance.\u003c\/p\u003e\u003cp\u003eThe InnovairFlex series is designed for greater flexibility and reliable smoke detection to simplify installation and maintenance. The new InnovairFlex product line is backward compatible to existing Innovair models, including remote test accessories\u003c\/p\u003e\u003cp\u003eWARNING: Duct smoke detectors have specific limitations.\u003c\/p\u003e\u003cp\u003eDUCT SMOKE DETECTORS ARE: NOT a substitute for an open area smoke detector, NOT a substitute for early warningetection, and NOT a replacement for a building’s regular fire detection system. Refer to NFPA 72 and 90A for additional duct smoke detector application information.\u003c\/p\u003e\u003cp\u003eThe InnovairFlex D2 2-wire photoelectric duct smoke detector features a pivoting housing that fits various applications: both square and rectangular footprints mount to round or rectangular duct work. This new duct smoke detector senses airflow speeds ranging from 100 to 4,000 feet per minute with proven System Sensor precision.The enhancements built into this model improve false alarm immunity (with plug-in sensor head); broaden operating temperature (-4°F to 158°F) and humidity (0 to 95 percent noncondensing) ranges; while simplifying installation and maintenance. These advance features can detect smoke even in the harshest duct applications. The new design provides more wiring space with an added ¾ inch conduit knockout. Numbers and labels for terminal designations are consistent with previous Innovair models. The new sampling tube can be clicked into position with one smooth motion from either the front or the back of the detector.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195204116715,"sku":"674177","price":272.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-D2.jpg?v=1786476842"},{"product_id":"honeywell-silent-knight-sk-minimon-intelligent-monitor-module-mini-15-to-32-vdc-400-milliampere-at-24-vdc-2-75-width-x-0-5-depth-x-1-3-height-for-fire-alarm-control-panel","title":"Honeywell Silent Knight SK-MINIMON | Intelligent Monitor Module, Mini, 15 To 32 Vdc, 400 Milliampere At 24 Vdc, 2.75\" Width X 0.5\" Depth X 1.3\" Height, For Fire Alarm Control Panel","description":"Honeywell Silent Knight SKMINIMON | Intelligent Monitor Module, Mini, 15 To 32 Vdc, 400 Milliampere At 24 Vdc, 2.75\" Width X 0.5\" Depth X 1.3\" Height, For Fire Alarm Control Panel","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195208114411,"sku":"698268","price":95.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Honeywell_Silent_Knight_SK-MINIMON_Monitor_Module_main.jpg?v=1786476863"},{"product_id":"system-sensor-d4s-sensor-innovairflex-4-wire","title":"System Sensor D4S - Sensor - Innovairflex 4-Wire","description":"System Sensor D4S | Duct Smoke Detector, 4-wire, Photoelectric, Sensor Only\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe InnovairFlex D4120 4-wire photoelectric duct smoke detector features a pivoting housing that fits both square and rectangular footprints and mounts to round or rectangular ductwork. This unit senses smoke in the most challenging conditions, operati ng in airflow speeds of 100 to 4,000 feet per minute, temperatures of -4ºF to 158ºF, and a humidity range of 0 to 95 percent (noncondensing). A plug-in sensor head offers improved false alarm immunity and simple installation, testing, and maintenance. An improved cover design isolates the sensor head from the low-flow feature for simple maintenance.\u003c\/p\u003e\u003cp\u003eThe InnovairFlex housing provides ample wiring space, a 3\/4-inch conduit knockout, and built-in short circuit protection to prevent damage to sensitive components during installation. High contrast terminal designations make wiring easy. With its 2:1 sensor-to-power capability, the power board of the D4120 may be used to monitor a second sensor, D4S, simultaneously (i.e., supply and return side). As many as 50 InnovairFlex detectors can be interconnected. When one unit senses smoke, all interconnected detectors will switch their relays; only the detector sensing smoke will go into alarm, thus pinpointing the fire source.\u003c\/p\u003e\u003cp\u003eAn easy-access Test\/Reset button makes it possible to test the unit with the cover on. Three DIP switches can be used to configure field selectable settings: cover tamper delay, number of sensors to be controlled, and shut down on trouble option. Each power board has two LED s that can be used to indicate the status of connected sensors, and a quick reference imprinted on the cover explains the LED status indications (Standby, Maintenance, Trouble, and Alarm). The InnovairFlex duct smoke detector can be customized to meet local codes and specifications without additional wiring. The new InnovairFlex product line is compatible with all previous Innovair models, including remote test accessories.\u003c\/p\u003e\u003cp\u003eWARNING: Duct smoke detectors are NOT a substitute for open area smoke detectors; NOT a substitute for early warning detection; NOT a replacement for a building’s regular fire detection system.\u003c\/p\u003e\u003cp\u003eDuct Smoke Detector\u003c\/p\u003e\u003cp\u003eThe InnovairFlex Series are the only duct smoke detectors flexible enough to fit configurations from square to rectangular and everything in between.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195365073131,"sku":"674187","price":194.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-D4S.jpg?v=1786477684"},{"product_id":"bosch-security-systems-d296-smoke-detector-long-range-beam-24v","title":"Bosch Security Systems D296 | Smoke Detector, Long-Range Beam 24V","description":"Bosch Security Systems D296 | Smoke Detector, Long-Range Beam 24V\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe D296 provides an effective and unobtrusive means of supervising public areas for fire protection. It consists of a transmitter and a receiver that typically mount on the ceiling or high on walls or columns and a remote indicator plate that mounts at eye level.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195381031147,"sku":"274265-LA","price":709.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Bosch_Security_Systems_D296_Main-905.jpg?v=1786477766"},{"product_id":"system-sensor-d4p120-board-innovairflex-4-wire","title":"System Sensor D4P120 - Board - Innovairflex 4-Wire","description":"System Sensor D4P120 | Duct Smoke Detector, 4-wire, Photoelectric, Power Board Only\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe InnovairFlex D4120 4-wire photoelectric duct smoke detector features a pivoting housing that fits both square and rectangular footprints and mounts to round or rectangular ductwork. This unit senses smoke in the most challenging conditions, operati ng in airflow speeds of 100 to 4,000 feet per minute, temperatures of -4ºF to 158ºF, and a humidity range of 0 to 95 percent (noncondensing). A plug-in sensor head offers improved false alarm immunity and simple installation, testing, and maintenance. An improved cover design isolates the sensor head from the low-flow feature for simple maintenance.\u003c\/p\u003e\u003cp\u003eThe InnovairFlex housing provides ample wiring space, a 3\/4-inch conduit knockout, and built-in short circuit protection to prevent damage to sensitive components during installation. High contrast terminal designations make wiring easy. With its 2:1 sensor-to-power capability, the power board of the D4120 may be used to monitor a second sensor, D4S, simultaneously (i.e., supply and return side). As many as 50 InnovairFlex detectors can be interconnected. When one unit senses smoke, all interconnected detectors will switch their relays; only the detector sensing smoke will go into alarm, thus pinpointing the fire source.\u003c\/p\u003e\u003cp\u003eAn easy-access Test\/Reset button makes it possible to test the unit with the cover on. Three DIP switches can be used to configure field selectable settings: cover tamper delay, number of sensors to be controlled, and shut down on trouble option. Each power board has two LED s that can be used to indicate the status of connected sensors, and a quick reference imprinted on the cover explains the LED status indications (Standby, Maintenance, Trouble, and Alarm). The InnovairFlex duct smoke detector can be customized to meet local codes and specifications without additional wiring. The new InnovairFlex product line is compatible with all previous Innovair models, including remote test accessories.\u003c\/p\u003e\u003cp\u003eWARNING: Duct smoke detectors are NOT a substitute for open area smoke detectors; NOT a substitute for early warning detection; NOT a replacement for a building’s regular fire detection system.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195487625451,"sku":"674183","price":200.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-D4P120.jpg?v=1786478268"},{"product_id":"l-h-dottie-mc150-general-purpose-fire-stop-caulking-compound","title":"L. H. Dottie MC150 | General Purpose Fire Stop Caulking Compound","description":"L. H. Dottie MC150 | General Purpose Fire Stop Caulking Compound\u003cbr\u003e\u003cbr\u003e\u003cp\u003eMC150 is an elastomeric, one component, general purpose fire rated sealant, acoustic sealant and smoke seal for construction joints and through-penetrations. It is a water based, non-sag caulking grade sealant that is easy to apply and to retrofit. It cures to an elastomeric seal that is suitable where dynamic movement is expected. In the event of a fire, Metacaulk 150 will prevent the spread of flames, smoke, hot gases and water through joint openings and through-penetrations. No dilution or mixing is required for use.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195924914411,"sku":"786331","price":25.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/L_H_Dottie_Company_MC150_Main-2355.jpg?v=1786480506"},{"product_id":"system-sensor-co1224tr-carbon-monoxide-detector-with-test-4-wire-12-24-v-dc-ceiling-mount","title":"System Sensor CO1224TR - Carbon Monoxide Detector With Test 4 Wire, 12\/24 V Dc Ceiling Mount","description":"System Sensor CO1224TR | Carbon Monoxide Detector with Test 4 Wire, 12\/24 V DC Ceiling Mount\u003cbr\u003e\u003cbr\u003e\u003cp\u003eWith RealTest technology, the CO gas sensing cell used in the CO1224T and CO1224TR CO detectors can be tested using a CO gas agent, fully meeting the requirements of NFPA 720: 2009. Simply put the detector into RealTest mode, spray a small amount of C O into the detector per the installation instructions, and within seconds the detector will alarm, indicating successful gas entry.\u003c\/p\u003e\u003cp\u003eWhen dangerous amounts of CO are detected, the CO1224T and CO1224TR detectors alert residents by sounding and flasng a temp 4 signal alarm. With 24\/7 central station monitoring, residents are guaranteed protection whether they are away from home, sleeping, or already suffering from the effects of CO.\u003c\/p\u003e\u003cp\u003eThe CO1224T and CO1224TR are designed for system operationThese detectors are fully listed to UL 2075 and offer a code-required trouble relay to send a sensor failure or end-of-life signal to the control panel and the central station. The CO1224T and CO1224TR also use SEMS-type terminal Philips head screws fo r quicker and more positive wiring connections and code-required wiring supervision. With a low current draw, these detectors enable more devices to be connected to the panel, limiting the need to purchase extra power supplies or more expensive panels. As 12\/24 V DC detectors, the CO1224T and CO1224TR will operate on most industry security and fire alarm control panels.\u003c\/p\u003e\u003cp\u003eWith RealTest technology, the CO gas sensing cell used in the CO1224TR CO detector can be tested using a CO gas agent, fully meeting the requirements of NFPA 720: 2009. Simply put the detector into RealTest mode, spray a small amount of C O into the detector per the installation instructions, and within seconds the detector will alarm, indicating successful gas entry.\u003c\/p\u003e\u003cp\u003eWhen dangerous amounts of CO are detected, the CO1224TR detector alert residents by sounding and flasng a temp 4 signal alarm. With 24\/7 central station monitoring, residents are guaranteed protection whether they are away from home, sleeping, or already suffering from the effects of CO.\u003c\/p\u003e\u003cp\u003eThe CO1224TR is designed for system operationThese detectors are fully listed to UL 2075 and offer a code-required trouble relay to send a sensor failure or end-of-life signal to the control panel and the central station. The CO1224TR also uses SEMS-type terminal Philips head screws fo r quicker and more positive wiring connections and code-required wiring supervision. With a low current draw, these detectors enable more devices to be connected to the panel, limiting the need to purchase extra power supplies or more expensive panels. As 12\/24 V DC detectors, CO1224TR will operate on most industry security and fire alarm control panels.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49196050776299,"sku":"674168","price":118.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-CO1224TR.jpg?v=1786481155"},{"product_id":"honeywell-fire-systems-us-fire-lite-bat1270bp-12v-7ah-sealed-lead-acid-battery-5-unit-bulk-pack-of-bat-1270","title":"Honeywell Fire Systems Us \/ Fire-Lite BAT1270BP | 12V 7Ah Sealed Lead-Acid Battery- 5-Unit Bulk Pack of BAT-1270","description":"Honeywell Fire Systems Us \/ Fire-Lite BAT1270BP | 12V 7Ah Sealed Lead-Acid Battery- 5-Unit Bulk Pack of BAT-1270\u003cbr\u003e\u003cbr\u003e\u003cp\u003eBAT Series Batteries are Power Sonic brand batteries. BAT Series (or Power Sonic brand) batteries are recommended for secondary power or backup power for all FireLite fire alarm control equipment.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49196206588139,"sku":"698387","price":547.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Honeywell-Fire-Systems-Us-Fire-Lite-BAT1270BP-Acid-Battery-Main.jpg?v=1786481940"},{"product_id":"system-sensor-5151-detector-heat-detector-fixed-rate-of","title":"System Sensor 5151 - Detector - Heat Detector, Fixed\/Rate Of","description":"System Sensor 5151 | Combination Fixed and Rate-of-Rise Plug-in Heat Detector\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 5151 thermal detector meets the needs for applications where rapid response is vital and rapid temperature increases would only be caused by a fire emergency.\u003c\/p\u003e\u003cp\u003eThe detector initiates an alarm in response to both rapid rate-of-rise conditions (increases in excess of 15ºF per minute) and fixed heat (135ºF). This enables the heat detector to communicate an alarm to the central control panel prior to reaching its fixed set point for high rates of rise, providing a timely response to both rapid and slow temperature increases.\u003c\/p\u003e\u003cp\u003eSystem Sensor 100 Series Plug-in Thermal Detectors offer superb performance and reliability in a sleek, low-profile design.\u003c\/p\u003e\u003cp\u003eThe 5151 thermal detector meets the needs for applications where rapid response is vital and rapid temperature increases would only be caused by a fire emergency. The detector initiates an alarm in response to both rapid rate-of-rise conditions (increases in excess of 15°F per minute) and fixed heat (135°F). This enables the heat detector to communicate an alarm to the central control panel prior to reaching its fixed set point for high rates of rise, providing a timely response to both rapid and slow temperature increases. A full line of accessories are available for this product.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49196283035883,"sku":"674103","price":57.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-5151.jpg?v=1786482328"},{"product_id":"honeywell-silent-knight-beamsmk-beam-standard-surface-mount-kit-use-with-beammmk","title":"Honeywell Silent Knight BEAMSMK | Beam Standard Surface Mount Kit, Use With Beammmk","description":"Honeywell Silent Knight BEAMSMK | Beam Standard Surface Mount Kit, Use With Beammmk","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49196462375147,"sku":"698664","price":69.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SIL-BEAMSMK.jpg?v=1786483272"},{"product_id":"system-sensor-cosmo-2w-i4-series-12-24v-2-wire-system-connected","title":"System Sensor COSMO-2W - I4 Series, 12\/24V, 2-Wire, System-Connected","description":"System Sensor COSMO-2W | Carbon Monoxide Smoke Detector 2W\u003cbr\u003e\u003cbr\u003e\u003cp\u003eIntegration: The i4 Series combines CO and smoke detection into one device, requiring less wiring and fewer back boxes than two separate devices. The i4 Series is compatible with i3 (2WTA-B or 4WTA-B), so an attractive CO monitoring solution can easily be retrofitted into existing i3 installations. The i4 Series CO cell can be easily replaced at end-of-life, resulting in a much lower life cost than having to replace the entire detector.\u003c\/p\u003e\u003cp\u003eInstallation ease: The i4 Series Combination CO\/Smoke detector requires less wiring than two separate CO and smoke devices. Installers can pre-wire its plug-in base, while its large wire-entry port and in-line terminals provide ample room for neatly routing wiring. The base accommodates several back box options and also direct mounts using drywall anchors. The i4 head plugs into the base with a simple Stop-Drop ’N Lock(TM) action. When the detector’s CO cell reaches end-of-life, it can be easily replaced in the field without a tool.\u003c\/p\u003e\u003cp\u003eIntelligence: With the help of the module, the i4 Series transmits distinct CO and smoke signals, allowing appropriate response from the central monitoring station. Intelligent features, such as drift compensation and smoothing algorithms, reduce nuisance alarms.\u003c\/p\u003e\u003cp\u003eInstant inspection: The i4 Series LEDs enable instant inspection of detector status signaling normal\/standby condition, alarm condition, maintenance\/trouble condition or functional test mode. 2-wire devices allow loop testing via the EZ Walk feature where wiring can easily be verified by checking the LED status at each detector. Smoke sensitivity can be easily measured using the wireless SENSRDR device. CO cell functionality can also be quickly validated in the field with canned CO per NFPA 720: 2009 requirem ents using the detector’s RealTest functionality.\u003c\/p\u003e\u003cp\u003eThe i4 module allows up to 12 i4 Series or compatible i 3 Series smoke detector models to be integrated into a fire alarm panel using only 2 to 3 zones: a smoke zone, a CO zone and an optional trouble zone. Detectors sound Temp 3 for smoke and Temp 4 for CO events. The i4 module can be used to alarm all sounders in compatible detectors for smoke and CO events. When one detector detects smoke or CO and goes into alarm, all connected detectors alarm, offering the highest level of warning to the homeowner. The i4 Series Interface Module mounts to a 411\/16-inch square back box for quick and easy installation. Terminal blocks with durable SEMS screws ensure a reliable connection. It also has pre-drilled holes for easy mounting inside a metal enclosure. The i4 Interface Module allows i4 and compatible i3 smoke detector models (2WTA-B and 4WTA-B) to communicate with any listed fire alarm control panel capable of utilizing this module. The i4 Interface Module provides LED status indication for the loop, displaying normal operation, loop wiring fault, smoke events, smoke maintenance (2-wire only), CO events, and CO maintenance\/end-of-life.\u003c\/p\u003e\u003cp\u003eThe i4 module allows up to 12 i4 Series or compatible i 3 Series smoke detector models to be integrated into a fire alarm panel using only 2 to 3 zones: a smoke zone, a CO zone and an optional trouble zone. Detectors sound Temp 3 for smoke and Temp 4 for CO events. The i4 module can be used to alarm all sounders in compatible detectors for smoke and CO events. When one detector detects smoke or CO and goes into alarm, all connected detectors alarm, offering the highest level of warning to the homeowner. The i4 Series Interface Module mounts to a 411\/16-inch square back box for quick and easy installation. Terminal blocks with durable SEMS screws ensure a reliable connection. It also has pre-drilled holes for easy mounting inside a metal enclosure. The i4 Interface Module allows i4 and compatible i3 smoke detector models (2WTA-B and 4WTA-B) to communicate with any listed fire alarm control panel capable of utilizing this module. The i4 Interface Module provides LED status indication for the loop, displaying normal operation, loop wiring fault, smoke events, smoke maintenance (2-wire only), CO events, and CO maintenance\/end-of-life.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49197029818603,"sku":"674171","price":174.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-COSMO2W.jpg?v=1786486110"},{"product_id":"system-sensor-cosmo-4w-cosmo4w-4-wire-co-smoke-detector","title":"System Sensor COSMO-4W - Cosmo4W 4-Wire Co\/Smoke Detector","description":"\u003cp\u003eSystem Sensor COSMO-4W | Carbon Monoxide Smoke Detector 4W\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIntegration: The i4 Series combines CO and smoke detection into one device, requiring less wiring and fewer back boxes than two separate devices. The i4 Series is compatible with i3 (2WTA-B or 4WTA-B), so an attractive CO monitoring solution can easily be retrofitted into existing i3 installations. The i4 Series CO cell can be easily replaced at end-of-life, resulting in a much lower life cost than having to replace the entire detector.\u003c\/p\u003e\n\u003cp\u003eInstallation ease: The i4 Series Combination CO\/Smoke detector requires less wiring than two separate CO and smoke devices. Installers can pre-wire its plug-in base, while its large wire-entry port and in-line terminals provide ample room for neatly routing wiring. The base accommodates several back box options and also direct mounts using drywall anchors. The i4 head plugs into the base with a simple Stop-Drop ’N Lock(TM) action. When the detector’s CO cell reaches end-of-life, it can be easily replaced in the field without a tool.\u003c\/p\u003e\n\u003cp\u003eIntelligence: With the help of the module, the i4 Series transmits distinct CO and smoke signals, allowing appropriate response from the central monitoring station. Intelligent features, such as drift compensation and smoothing algorithms, reduce nuisance alarms.\u003c\/p\u003e\n\u003cp\u003eInstant inspection: The i4 Series LEDs enable instant inspection of detector status signaling normal\/standby condition, alarm condition, maintenance\/trouble condition or functional test mode. 2-wire devices allow loop testing via the EZ Walk feature where wiring can easily be verified by checking the LED status at each detector. Smoke sensitivity can be easily measured using the wireless SENSRDR device. CO cell functionality can also be quickly validated in the field with canned CO per NFPA 720: 2009 requirem ents using the detector’s RealTest functionality.\u003c\/p\u003e\n\u003cp\u003eThe best-in-class System Sensor COSMO-4W i4 Series combination CO\/Smoke Detector is a 4-Wire carbon monoxide (CO) and smoke detection technology in a single, system-connected device.\u003c\/p\u003e\n\u003cp\u003eThe i4 Series LEDs enable instant inspection of detector status signaling normal\/standby condition, alarm condition, maintenance\/trouble condition or functional test mode. 2-wire devices allow loop testing via the EZ Walk feature where wiring can easily be verified by checking the LED status at each detector.\u003c\/p\u003e\n\u003cp\u003eSmoke sensitivity can be easily measured using the wireless SENSRDR device. CO cell functionality can also be quickly validated in the field with canned CO per NFPA 720: 2009 requirements using the detectors RealTest functionality\u003c\/p\u003e\n\u003cp\u003eThe i4 Interface Module connects up to 12 detectors to a wide range of control panels using only 2 to 3 zones. It also interconnects the devices, so when one device alarms, they all sound.\u003c\/p\u003e\n\u003cp\u003eThe i4 module allows up to 12 i4 Series or compatible i 3 Series smoke detector models to be integrated into a fire alarm panel using only 2 to 3 zones: a smoke zone, a CO zone and an optional trouble zone. Detectors sound Temp 3 for smoke and Temp 4 for CO events. The i4 module can be used to alarm all sounders in compatible detectors for smoke and CO events. When one detector detects smoke or CO and goes into alarm, all connected detectors alarm, offering the highest level of warning to the homeowner.\u003c\/p\u003e\n\u003cp\u003eThe i4 Series Interface Module mounts to a 411\/16-inch square back box for quick and easy installation. Terminal blocks with durable SEMS screws ensure a reliable connection. It also has pre-drilled holes for easy mounting inside a metal enclosure.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49197029851371,"sku":"674172","price":178.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-COSMO4W.jpg?v=1786486110"},{"product_id":"honeywell-silent-knight-rts151-magnetic-remote-test-and-reset-stat","title":"Honeywell Silent Knight RTS151 | Magnetic Remote Test And Reset Stat","description":"Honeywell Silent Knight RTS151 | Magnetic Remote Test And Reset Stat","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49201260855531,"sku":"10186832","price":76.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Honeywell_Silent_Knight_RTS151_Magnetic_Remote_Test_main.jpg?v=1786512288"},{"product_id":"fire-lite-alarms-rts151-test-equipment-remote-test-station","title":"Fire-Lite Alarms RTS151 | Test Equipment Remote Test Station","description":"Fire-Lite Alarms RTS151 | Test Equipment Remote Test Station","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49201277894891,"sku":"785457","price":76.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Fire-Lite-Alarms-RTS151-Key-Main.jpg?v=1786512362"},{"product_id":"honeywell-silent-knight-b210lpbp-detector-mounting-base-plug-in-6-1-diameter-24-to-12-awg","title":"Honeywell Silent Knight B210LPBP | Detector Mounting Base, Plug-In, 6.1\" Diameter, 24 To 12 Awg","description":"Honeywell Silent Knight B210LPBP | Detector Mounting Base, Plug-In, 6.1\" Diameter, 24 To 12 Awg, With Flange, 10 Each Per Pack","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49201297916139,"sku":"785358","price":189.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Honeywell-B210LPBP-Detector-Mounting-Base-Main.jpg?v=1786512445"},{"product_id":"bosch-security-systems-d340-duct-detector-housing-2-wire","title":"Bosch Security Systems D340 | Duct Detector Housing, 2-Wire","description":"Bosch Security Systems D340 | Duct Detector Housing, 2-Wire\u003cbr\u003e\u003cbr\u003e\u003cp\u003eTwo-wire duct detector housing for the D285DH Duct smoke head. Use with compatible control panels.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49203912671467,"sku":"274264-LA","price":109.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Bosch_Security_Systems_D340_Main-904.jpg?v=1786532843"},{"product_id":"bosch-rfsm-a-wireless-smoke-detector","title":"Bosch RFSM-A | Wireless Smoke Detector","description":"This item is discontinued by supplier. Please see Anixter# 10098733 for suggested replacement. Photoelectric and dual fixed\/rate-of-rise detector. For use in North and South America.","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49203917717739,"sku":"564004","price":110.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Bosch_Security_CCTV_Systems_RFSM-A.jpg?v=1786532880"},{"product_id":"system-sensor-co-repl-replacement-co-cell-for-cosmo-2w-and-cosmo-4w","title":"System Sensor CO-REPL - Replacement Co Cell For Cosmo-2W And Cosmo-4W","description":"System Sensor CO-REPL | Replacement CO Cell for COSMO-2W and COSMO-4W Models\u003cbr\u003eID \u003cspan style=\"background-color: rgb(255, 255, 255); color: rgb(20, 20, 20); font-family: roboto, sans-serif; font-size: 18px; letter-spacing: 0.24px;\"\u003eCOREPL \u003c\/span\u003e\u003cp\u003eIntegration: The i4 module allows up to 12 i4 Series or compatible i 3 Series smoke detector models to be integrated into a fire alarm panel using only 2 to 3 zones: a smoke zone, a CO zone and an optional trouble zone. Detectors sound Temp 3 for smoke and Temp 4 for CO events. The i4 module can be used to alarm all sounders in compatible detectors for smoke and CO events. When one detector detects smoke or CO and goes into alarm, all connected detectors alarm, offering the highest level of warning to the homeowner.\u003c\/p\u003e\u003cp\u003eInstallation ease: The i4 Series Interface Module mounts to a 411\/16-inch square back box for quick and easy installation. Terminal blocks with durable SEMS screws ensure a reliable connection. It also has pre-drilled holes for easy mounting inside a metal enclosure Intelligence: The i4 Interface Module allows i4 and compatible i3 smoke detector models (2WTA-B and 4WTA-B) to communicate with any listed fire alarm control panel capable of utilizing this module.\u003c\/p\u003e\u003cp\u003eInstant inspection: The i4 Interface Module provides LED status indication for the loop, displaying normal operation, loop wiring fault, smoke events, smoke maintenance (2-wire only), CO events, and CO maintenance\/end-of-life.\u003c\/p\u003e\u003cp\u003eThe i4 Interface Module connects up to 12 detectors to a wide range of control panels using only 2 to 3 zones. It also interconnects the devices, so when one device alarms, they all sound.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49203976503531,"sku":"996652","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/System_20Sensor_20CO-REPL.jpg?v=1786533290"},{"product_id":"system-sensor-osi-r-ss-detector-conventional-beam-detector","title":"System Sensor OSI-R-SS - Detector - Conventional Beam Detector","description":"System Sensor OSI-R-SS | Heat Detector, Conventional Beam Detector, Replaces Beam1224\/Beam1224S, 10.5\"Lx 8.9\"Wx 6.9\"H\u003cbr\u003e\u003cbr\u003e\u003cp\u003eOSI-R-SS is a 4-wire conventional reflector-type linear optical beam smoke detector for use in fire alarm systems. The beam operates primarily on the principle of light obscuration using an infrared beam. Optical beam smoke detectors are uniquely suited to protecting buildings with large open areas with high ceilings such as a warehouse or atrium. The OSI-R-SS detector is a combined transmitter\/receiver unit that can be directly connected to a conventional detector circuit.\u003c\/p\u003e\u003cp\u003eThis conventional, single-ended beam smoke detector is easy to install – only one side needs to be wired.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49203977027819,"sku":"1052452","price":1439.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/OSI-R-SS.jpg?v=1786533292"},{"product_id":"system-sensor-st-1-5-smoke-detector-duct-smoke-detector-conduit","title":"System Sensor ST-1.5 - Smoke Detector - Duct Smoke Detector Conduit","description":"System Sensor ST-1.5 | Metal Sampling Tube, for Duct Widths 1’-2’","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49203977814251,"sku":"674544","price":21.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/System-Sensor-ST-1-5-Metal-Sampling-Tube-Main.jpg?v=1786533297"},{"product_id":"system-sensor-st-10-smoke-detector-duct-smoke-detector-conduit","title":"System Sensor ST-10 - Smoke Detector - Duct Smoke Detector Conduit","description":"System Sensor ST-10 | Metal Sampling Tube, for Duct Widths 8’-12’","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49203977847019,"sku":"674545","price":64.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/System-Sensor-ST-10-Metal-Sampling-Tube-Main.jpg?v=1786533297"},{"product_id":"system-sensor-wav-crl-sensor-swift-av-base-ceiling-red","title":"System Sensor WAV-CRL - Sensor - Swift Av Base; Ceiling; Red","description":"System Sensor WAV-CRL | Heat Detector, Swift Av Base; Ceiling; Red\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe System Sensor SWIFT Wireless system offers an AV base to support L-Series devices in wireless installations.\u003c\/p\u003e\u003cp\u003eThe SWIFT AV bases (WAV-CRL and WAV-CWL) are intended for use with compatible System Sensor L-Series AV notification appliances to meet a comprehensive range of notification requirements. The AV Base provides power for the audio and visual signals and supports wireless communication with the Fire Alarm Control Panel (FACP). The L-Series AV notification appliance is mounted directly to the wireless AV base allowing flexibility in color, placement and signal output.\u003c\/p\u003e\u003cp\u003ePower is supplied through two sets of 4 batteries - one set provides power for wireless communication, and the other set provides power for the notification appliance's audio and\/or visual signal.Battery life of the wireless portion is UL listed for at least 2 years. Battery life for the AV set of batteries depends upon the activation time and output level of the audio or visual signal.\u003c\/p\u003e\u003cp\u003eThe SWIFT synchronization module (W-SYNC) can be used to provide audio and visual synchronization between SWIFT notification appliances and System Sensor wired notification appliances. The wireless synchronization module operates from 24V power with supplemental battery support and communicates through the mesh network to the gateway and FACP. Synchronization is only available with notification appliances that use the System Sensor synchronization protocol. Synchronization of the SWIFT notification appliances within a single mesh network is inherent in the wireless system and a wireless synchronization module is not needed. The W-SYNC also provides wireless control and monitoring of a Notification Appliance Circuit (NAC) expander or power supply.\u003c\/p\u003e\u003cp\u003eThe SWIFT Smart Wireless Integrated Fire Technology wireless system offers intelligent (addressable) devices which provide secure, reliable communication to the Fire Alarm Control Panel (FACP) across a Class A mesh network. Wireless devices create an opportunity for applications where it is costly (concrete walls\/ceilings, buried wires), obtrusive (surface mount conduit), or possibly dangerous (asbestos) to use traditional wired devices. It allows fast installation for time-critical situations and provides the flexibility to add wireless onto wired systems for retrofit installations. Both wired and wireless devices can be present on the same FACP for an integrated solution.\u003c\/p\u003e\u003cp\u003eThe mesh network within the SWIFT system creates a child-parent relationship between the devices so that each device has two parents providing a second path for communications on every device. If one device can no longer operate for any reason, the rest of the devices can still communicate with each other, directly or through one or more intermediate devices. Once an initial mesh network is formed, mesh restructuring automatically occurs to find the strongest paths possible within the network.\u003c\/p\u003e\u003cp\u003eThe SWIFT system also engages frequency hopping to prevent system interference whether intentional or accidental. Each device complies with part 15 of the FCC rules: 1) The device may not cause harmful interference and 2) The device must accept any interference received including interference that may cause undesired operation.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49203978043627,"sku":"963189","price":325.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/System-Sensor-WAV-CRL-Heat-Detector-Main.jpg?v=1786533302"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/collections\/Smoke_20and_20Heat_20Detection_20.jpg?v=1786469572","url":"https:\/\/www.alldataresource.com\/collections\/smoke-and-heat-detection.oembed","provider":"All Data Resource","version":"1.0","type":"link"}