{"title":"System Sensor","description":null,"products":[{"product_id":"system-sensor-mdl3r-module-sync-module-3-red","title":"System Sensor MDL3R - Module - Sync Module 3 Red","description":"System Sensor MDL3R | Sync-circuit Module, 12\/24 Volt, Red\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe MDL3 Module is designed to work with the SpectrAlert and SpectrAlert Advance series of notification appliances to provide a means of synchronizing the temporal-coded horns and chimes, synchronizing the one-second flash timing of the strobe, and sil encing the horns and chimes of the horn\/strobe and chime\/ strobes combination over a two-wire circuit while leaving the strobes active.\u003c\/p\u003e\u003cp\u003eApplication Flexibility. The Sync Circuit module is designed to power and synchronize either two 3-amp circuits wired in Class B, or one 3-amp circuit powered as Class A. Should more than two zones require synchronization, additional modules can be added by interconnecting the \"slave\" input and output terminals between modules.\u003c\/p\u003e\u003cp\u003eThe Sync-Circuit module synchronizes SpectrAlert Advance strobes at 1 Hz and horns and chimes at temporal 3 over a single pair of wires. Patented module technology also allows the silencing of horns or chimes on horn\/strobe and chime\/strobe models over a pair of wires.\u003c\/p\u003e\u003cp\u003eThe MDL3 Module is designed to work with the SpectrAlert and SpectrAlert Advance series of notification appliances to provide a means of synchronizing the temporal-coded horns and chimes, synchronizing the one-second flash timing of the strobe, and silencing the horns and chimes of the horn\/strobe and chime\/ strobes combination over a two-wire circuit while leaving the strobes active. Application Flexibility.\u003c\/p\u003e\u003cp\u003eThe Sync-Circuit module is designed to power and synchronize either two 3-amp circuits wired in Class B, or one 3-amp circuit powered as Class A. Should more than two zones require synchronization, additional modules can be added by interconnecting the “slave” input and output terminals between modules.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195054334187,"sku":"674258","price":114.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-MDL3R.jpg?v=1786475572"},{"product_id":"system-sensor-rfp-plate-retrofit-mounting-plate-red","title":"System Sensor RFP - Plate - Retrofit Mounting Plate, Red,","description":"System Sensor RFP | Retrofit Plate, Red\u003cbr\u003e\u003cbr\u003e\u003cp\u003eRetrofit Plates cover paint outlines on the wall when replacing legacy SpectrAlert Advance products.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195054629099,"sku":"674401","price":106.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-RFP.jpg?v=1786475575"},{"product_id":"system-sensor-dst3-accessory-duct-sampling-tube-3-with","title":"System Sensor DST3 - Accessory - Duct Sampling Tube, 3' With","description":"System Sensor DST3 | Metal Sampling Tube for DNRE and D2E, Duct Widths 2' to 4'\u003cbr\u003e\u003cbr\u003e\u003cp\u003eDuct smoke detector accessories add functionality to the duct smoke detection system by allowing quick, convenient inspections at eye level and effective audible and visible notification options. All System Sensor duct smoke detectors and accessories a re UL listed.\u003c\/p\u003e\u003cp\u003eThe InnovairFlex product line offers the same testing and inspection features to meet any code with existing Innovair accessories.\u003c\/p\u003e\u003cp\u003eSystem Sensor provides system flexibility with a variety of accessories, including two remote test stations and several different means of visible and audible system annunciation. As with our duct detectors, all duct smoke detector accessories are UL listed.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195103158507,"sku":"674209","price":23.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-DST3.jpg?v=1786476351"},{"product_id":"system-sensor-dst5-accessory-duct-sampling-tube-5-with","title":"System Sensor DST5 - Accessory - Duct Sampling Tube, 5' With","description":"System Sensor DST5 | Smoke Detector Sampling Tube, 4 to 8’ Width, Metal\u003cbr\u003e\u003cbr\u003e\u003cp\u003eDuct smoke detector accessories add functionality to the duct smoke detection system by allowing quick, convenient inspections at eye level and effective audible and visible notification options. All System Sensor duct smoke detectors and accessories a re UL listed.\u003c\/p\u003e\u003cp\u003eThe InnovairFlex product line offers the same testing and inspection features to meet any code with existing Innovair accessories.\u003c\/p\u003e\u003cp\u003eSystem Sensor provides system flexibility with a variety of accessories, including two remote test stations and several different means of visible and audible system annunciation. As with our duct detectors, all duct smoke detector accessories are UL listed.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195103322347,"sku":"674212","price":28.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-DST5.jpg?v=1786476350"},{"product_id":"system-sensor-dcoil-accessory-innovairflex-duct-accessory","title":"System Sensor DCOIL - Accessory - Innovairflex Duct Accessory","description":"System Sensor DCOIL | 2-Wire Remote Test Coil\u003cbr\u003e\u003cbr\u003e\u003cp\u003eRemote test coil required with RTS451\/RTS451KEY\/RTS151\/RTS151KEY\u003c\/p\u003e\u003cp\u003eName: System Sensor DCOIL 2-Wire Remote Test Coil, Honeywell International, Inc, System Sensor\u003c\/p\u003e\u003cp\u003eCategory: System Sensor, Fire, Testing Equipment, Remote Test Stations\u003c\/p\u003e\u003cp\u003eUPC Code: 783863037146\u003c\/p\u003e\u003cp\u003eCountry of Origin: China. Country of origin is subject to change.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195116462315,"sku":"674190","price":44.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-DCOIL.jpg?v=1786476406"},{"product_id":"system-sensor-dst10-accessory-duct-sampling-tube-10-with","title":"System Sensor DST10 - Accessory - Duct Sampling Tube, 10' With","description":"System Sensor DST10 | Metal Sampling Tube DNRE and D2E, Duct Widths 8' to 12'\u003cbr\u003e\u003cbr\u003e\u003cp\u003eDuct smoke detector accessories add functionality to the duct smoke detection system by allowing quick, convenient inspections at eye level and effective audible and visible notification options. All System Sensor duct smoke detectors and accessories a re UL listed.\u003c\/p\u003e\u003cp\u003eThe InnovairFlex product line offers the same testing and inspection features to meet any code with existing Innovair accessories.\u003c\/p\u003e\u003cp\u003eSystem Sensor provides system flexibility with a variety of accessories, including two remote test stations and several different means of visible and audible system annunciation. As with our duct detectors, all duct smoke detector accessories are UL listed.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195117674731,"sku":"674206","price":57.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-DST10.jpg?v=1786476411"},{"product_id":"system-sensor-sa-wbbcw-enclosure-separate-ship-ceiling-mount","title":"System Sensor SA-WBBCW - Enclosure - Separate Ship Ceiling-Mount","description":"System Sensor SA-WBBCW | Back Box, Separate Ship, Ceiling-mount, Outdoor, White\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSpectrAlert Advance Outdoor Back Boxes ensure a NEMA 4X weatherproof listing for AV devices. In locations where you have a hard surface to mount to, Surface Mount Back boxes are the best solution.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195131633899,"sku":"674411","price":39.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-SAWBBCW.jpg?v=1786476480"},{"product_id":"system-sensor-rts2-accessory-multi-signaling-duct-accessory","title":"System Sensor RTS2 - Accessory - Multi-Signaling Duct Accessory","description":"System Sensor RTS2 | Multi-Signaling Accessory, Without Strobe, for InnovairFlex 4-Wire Conventional Duct Smoke Detectors\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe RTS2 and RTS2-AOS multi-signaling accessories are designed to work with InnovairFlex 4-wire conventional duct smoke detectors. These accessories include a key switch that can be used to select one of two connected sensors to be tested, reset, or bo th by a push button switch. They also enable sensitivity measurements using the SENS-RDR sensitivity reader (sold separately). The AOS (Add-On Strobe) is an optional accessory included with the RTS2-AOS model.\u003c\/p\u003e\u003cp\u003eThe RTS2 and RTS2-AOS multi-signaling accessories are designed to work with InnovairFlex 4-wire conventional duct smoke detectors.\u003c\/p\u003e\u003cp\u003eThese accessories include a key switch that can be used to select one of two connected sensors to be tested, reset, or both by a push button switch. They also enable sensitivity measurements using the SENS-RDR sensitivity reader (sold separately). The AOS (Add-On Strobe) is an optional accessory included with the RTS2- AOS mode.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195132977387,"sku":"674407","price":156.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-RTS2.jpg?v=1786476483"},{"product_id":"system-sensor-swhk-strobe-strobe-wall-hi-candela-white","title":"System Sensor SWHK - Strobe - Strobe Wall Hi Candela White","description":"System Sensor SWHK | Strobe, High-candela, Outdoor, Wall Mount, with Backbox, White\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSpectrAlert Advance offers the broadest line of outdoor horns, strobes, and horn strobes in the industry. With white or red plastic housings, wall or ceiling mounting options, and plain or FIRE-printed devices, SpectrAlert Advance can meet virtually an y application requirement, including indoor, outdoor, wet, and dry applications in temperatures from -40ºF to 151ºF.\u003c\/p\u003e\u003cp\u003eLike the entire SpectrAlert Advance line, outdoor horns, strobes, and horn strobes for wall applications include a variety of features that increase application flexibility and simplify installation. First, field-selectable settings, including candela, automatic selection of 12- or 24-volt operation, horn tones, and three volume options enable installers to easily adapt devices to m eet requirements.\u003c\/p\u003e\u003cp\u003eNext, SpectrAlert Advance devices use a universal mounting plate for both wall and ceiling applications. This mounting plate includes an onboard shorting spring that ensures wiring continuity before devices are installed, so installers can verify proper wiring without mounting the devices and exposing them to potential construction damage. Once the plates are mounted, all SpectrAlert Advance devices utilize a plug-in design with a single captured screw to speed installation and v irtually eliminate costly ground faults.\u003c\/p\u003e\u003cp\u003eOutdoor devices ship with weatherproof plastic back boxes (metal back boxes are available separately) that accommodate in-andout wiring for daisy chaining devices. Plastic back boxes feature removable side flanges and improved resistance to saltwater corrosion. Knock-outs located on the back eliminate the need to drill holes for screw-in mounting. Plastic and metal weatherproof back boxes come with 3\/4 inch top and bottom conduit entries and 3\/4 inch knock- outs at the back. A screw-in NPT plug with an O-ring gasket for a watertight seal is included with each back box.\u003c\/p\u003e\u003cp\u003eThe SpectrAlert Advance series of notification appliances offers a wide range of horns, strobes, and horn\/strobes, for wall and ceiling applications, indoors and outdoors. They are designed to be used in 12 or 24 volt, DC or FWR (full wave rectified) systems. These products are electrically backward compatible with the previous generation of SpectrAlert notification appliances. Horn\/ strobe products are available in two versions. The 2-wire products fit systems where a single NAC controls both horn and strobe. The 4-wire products are intended for systems which have separate wiring circuits for the horn and strobe. All SpectrAlert Advance products are suitable for use in synchronized systems. The System Sensor MDL module may be used to provide synchronization.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195133436139,"sku":"674557","price":99.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-SWHK.jpg?v=1786476487"},{"product_id":"system-sensor-rts2-aos-accessory-multi-signaling-duct","title":"System Sensor RTS2-AOS - Accessory - Multi-Signaling Duct","description":"System Sensor RTS2-AOS | Multi-signaling Accessory\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe RTS2 and RTS2-AOS multi-signaling accessories are designed to work with InnovairFlex 4-wire conventional duct smoke detectors. These accessories include a key switch that can be used to select one of two connected sensors to be tested, reset, or bo th by a push button switch. They also enable sensitivity measurements using the SENS-RDR sensitivity reader (sold separately). The AOS (Add-On Strobe) is an optional accessory included with the RTS2-AOS model.\u003c\/p\u003e\u003cp\u003eThe System Sensor RTS2 and RTS2-AOS multi-signaling accessories are designed for use with System Sensor InnovairFlex 4-wire conventional duct smoke detectors only. The accessory has two bicolored LEDs that indicate the sensor status of up to two connected duct smoke detectors. The key switch on the unit can be used to select a connected duct detector sensor (either sensor 1 or sensor 2), and the selected sensor can be tested or both sensors can be reset simultaneously using the test\/reset button. LED status indications include Standby (green blink), Trouble (amber), Maintenance (amber blink) and Alarm (red).\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195137564907,"sku":"674408","price":234.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-RTS2AOS.jpg?v=1786476505"},{"product_id":"system-sensor-eolr-1-relay-relay-spst-end-of-line","title":"System Sensor EOLR-1 - Relay - Relay, Spst End Of Line","description":"System Sensor EOLR-1 | Relay, SPST, End-of-Line\u003cbr\u003e\u003cbr\u003e\u003cp\u003eModel EOLR-1 is an epoxy encapsulated, single-pole single-throw, normally open relay that can be used as an end of line device in fire alarm systems, e.g. to supervise power supplies.\u003c\/p\u003e\u003cp\u003eSystem Sensor’s multi-voltage conventional relays are used for high-current switching applications such as fan and damper assembly control, door control, air handling unit controls, and other types of system interfacing.\u003c\/p\u003e\u003cp\u003eModel EOLR-1 is an epoxy encapsulated single pull single throw (SPST) normally open relay that is activated by 9 to 40 VDC. This relay can be used as an end of line device in fire alarm systems, e.g., to supervise power supplies.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195143069931,"sku":"674214","price":36.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-EOLR1.jpg?v=1786476532"},{"product_id":"system-sensor-mwbb-enclosure-metal-back-box-wall","title":"System Sensor MWBB - Enclosure - Metal Back Box,Wall,","description":"System Sensor MWBB | Wall Mount Weatherproof Back Box, Red","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195143102699,"sku":"674265","price":58.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-MWBB.jpg?v=1786476532"},{"product_id":"system-sensor-sa-wbb-enclosure-separate-ship-wall-mount","title":"System Sensor SA-WBB - Enclosure - Separate Ship Wall-Mount","description":"System Sensor SA-WBB | Back Box, Separate Ship, Wall-mount, Outdoor\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSpectrAlert Advance Outdoor Back Boxes ensure a NEMA 4X weatherproof listing for AV devices. In locations where you have a hard surface to mount to, Surface Mount Back boxes are the best solution.\u003c\/p\u003e\u003cp\u003eSpectrAlert Advance devices can be adapted to nearly any application with the appropriate accessory. Our mounting options allow our strobes, speakers, horns, chimes, and strobe combinations to be placed in new or existing construction with professional results.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195143201003,"sku":"674409","price":39.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/System-Sensor-SA-WBB-Back-Box-Main.jpg?v=1786476532"},{"product_id":"system-sensor-sprk-speaker-wall-speaker-red","title":"System Sensor SPRK - Speaker - Wall Speaker, Red,","description":"System Sensor SPRK | SpectrAlert Advance Outdoor Speakers, Wall Mount, FIRE Marking, Red\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSpectrAlert Advance offers the broadest line of outdoor speakers and speaker strobes in the industry. From metal and plastic outdoor back boxes, to white and red plastic housings, to wall and ceiling mounting options, SpectrAlert Advance can meet virtu ally any application requirement.\u003c\/p\u003e\u003cp\u003eWall-mount outdoor speakers and speaker strobes can be used indoors or outdoors in wet or dry applications, and can provide reliable operation from -40ºF to 151ºF. These speakers provide a broad frequency response range, low harmonic distortion and maintain a high sound pressure level at all tap settings to provide accurate and intelligible broadcast of evacuation messages.\u003c\/p\u003e\u003cp\u003eLike the entire SpectrAlert Advance line, wall-mount outdoor speakers and speaker strobes include a variety of features that increase application flexibility and simplify installation. First, field-selectable settings, including candela, speaker voltage and power settings, and automatic selection of 12- or 24-volt operation enable installe rs to easily adapt devices to meet requirements.\u003c\/p\u003e\u003cp\u003eNext, these devices use a universal mounting plate with an onboard shorting spring that ensures wiring continuity before devices are installed, so installers can verify proper wiring without mounting the devices and exposing them to potential construction damage. Once the plates are mounted, all SpectrAlert Advance devices utilize a plug-in design with a single captured screw to speed installation and virtually eliminate costly ground faults.\u003c\/p\u003e\u003cp\u003eOutdoor devices ship with weatherproof plastic back boxes (metal back boxes are available separately) that accommodate in-andout wiring for daisy chaining devices. Plastic back boxes feature removable side flanges and improved resistance to saltwater corro sion. Knock-outs located on the back eliminate the need to drill holes for screw-in mounting. Plastic and metal weatherproof back boxes come with 3\/4-inch top and bottom conduit entries and 3\/4-inch knock-outs at the back. A screw-in NPT plug with an O -ring gasket 75S0 7320-1653:201 10-08-E for a watertight seal is included with each back box.\u003c\/p\u003e\u003cp\u003eThe SpectrAlert Advance series of notification appliances offers a wide range of indoor and outdoor speakers for wall and ceiling applications, indoors and outdoors. They are designed to be used at either 25 or 70.7 volts, and operate at any one for four input power levels.\u003c\/p\u003e\u003cp\u003eThese products are electrically backward compatible with the previous generation of SpectrAlert speakers. With its low total harmonic distortion, the SpectrAlert Advance SP series offers high fidelity sound output. The SpectrAlert Advance SPV series offers greater sound output at every tap setting for applications with high ambient noise levels.\u003c\/p\u003e\u003cp\u003eWall and ceiling products may be used interchangeably (wall products may be used on the ceiling and ceiling products may be used on the wall). K Series products are designed to be used over a wider range of temperatures and are suitable for use in wet locations.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195143266539,"sku":"674468","price":89.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-SPRK.jpg?v=1786476533"},{"product_id":"system-sensor-xp-4-accessory-extension-tubing-assembly-for","title":"System Sensor XP-4 - Accessory - Extension Tubing Assembly For","description":"System Sensor XP-4 | Extension Pole for XR2B, 5 to 15 ft.","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195143364843,"sku":"674649","price":278.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-XP4.jpg?v=1786476533"},{"product_id":"system-sensor-beammmk-kit-beam-standard-multi-mounting","title":"System Sensor BEAMMMK - Kit - Beam Standard Multi-Mounting","description":"System Sensor BEAMMMK | Beam Standard Multi-mounting Kit","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195158667499,"sku":"674144","price":125.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-BEAMMMK.jpg?v=1786476611"},{"product_id":"system-sensor-cb500-module-control-module-barrier","title":"System Sensor CB500 - Module - Control Module Barrier","description":"System Sensor CB500 | Barrier for Separate Power Limited and Non-Power Limited Juinction Box Wiring\u003cbr\u003e\u003cbr\u003e\u003cp\u003eName: System Sensor CB500 Barrier for Separate Power Limited and Non-Power Limited Juinction Box Wiring, Honeywell International, Inc, System Sensor\u003c\/p\u003e\u003cp\u003eCategory: System Sensor, Fire, Fire Detection Devices, Detector Parts \u0026amp; Accessories\u003c\/p\u003e\u003cp\u003eUPC Code: 783863005749\u003c\/p\u003e\u003cp\u003eCountry of Origin: United States. Country of origin is subject to change.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195158700267,"sku":"674161","price":24.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-CB500.jpg?v=1786476611"},{"product_id":"system-sensor-smb600-enclosure-detector-surface-mount-box","title":"System Sensor SMB600 - Enclosure - Detector Surface Mount Box","description":"System Sensor SMB600 | Detector Surface Mount Box\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe SMB600 Surface Mounting Kit allows System Sensor detectors to be surface mounted when the junction box intended to be used is not of adequate size.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195159159019,"sku":"674459","price":19.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-SMB600.jpg?v=1786476614"},{"product_id":"system-sensor-wbb-enclosure-weatherproof-back-box","title":"System Sensor WBB - Enclosure - Weatherproof Back Box","description":"System Sensor WBB | Weatherproof Back Box for SSM\/SSV Bells, Red\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe WBB is a weatherproof back box for use with SSM\/SSV bells.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195159257323,"sku":"674579","price":44.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-WBB.jpg?v=1786476615"},{"product_id":"system-sensor-xr2-tool-removal-tool-100-200","title":"System Sensor XR2 - Tool - Removal Tool 100\/200","description":"System Sensor XR2 | Installation\/Removal Tool, for 100\/200 Series\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe XR2 Detector Installation\/Removal Tool is designed for use with System Sensor plug-in smoke detectors. This tool permits installation and removal of detectors in elevated mounting locations up to 18 feet (5.5 meters) high when it is used with XP-4 extension poles (ordered separately).\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195159486699,"sku":"674650","price":194.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-XR2.jpg?v=1786476615"},{"product_id":"system-sensor-mdl3w-module-sync-module-3-white","title":"System Sensor MDL3W - Module - Sync Module 3 White","description":"System Sensor MDL3W | Sync-circuit Module, 12\/24 Volt, White\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe MDL3 Module is designed to work with the SpectrAlert and SpectrAlert Advance series of notification appliances to provide a means of synchronizing the temporal-coded horns and chimes, synchronizing the one-second flash timing of the strobe, and sil encing the horns and chimes of the horn\/strobe and chime\/ strobes combination over a two-wire circuit while leaving the strobes active.\u003c\/p\u003e\u003cp\u003eApplication Flexibility. The Sync Circuit module is designed to power and synchronize either two 3-amp circuits wired in Class B, or one 3-amp circuit powered as Class A. Should more than two zones require synchronization, additional modules can be added by interconnecting the \"slave\" input and output terminals between modules.\u003c\/p\u003e\u003cp\u003eThe Sync-Circuit module synchronizes SpectrAlert Advance strobes at 1 Hz and horns and chimes at temporal 3 over a single pair of wires. Patented module technology also allows the silencing of horns or chimes on horn\/strobe and chime\/strobe models over a pair of wires.\u003c\/p\u003e\u003cp\u003eThe MDL3 Module is designed to work with the SpectrAlert and SpectrAlert Advance series of notification appliances to provide a means of synchronizing the temporal-coded horns and chimes, synchronizing the one-second flash timing of the strobe, and silencing the horns and chimes of the horn\/strobe and chime\/ strobes combination over a two-wire circuit while leaving the strobes active.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195162566891,"sku":"674259","price":116.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-MDL3W.jpg?v=1786476631"},{"product_id":"system-sensor-spsrk-siren-wall-speaker-strobe-standard","title":"System Sensor SPSRK - Siren - Wall Speaker Strobe, Standard","description":"System Sensor SPSRK | SpectrAlert Advance Red Outdoor Speaker Strobe, Standard CD, FIRE Marking\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSpectrAlert Advance offers the broadest line of outdoor speakers and speaker strobes in the industry. From metal and plastic outdoor back boxes, to white and red plastic housings, to wall and ceiling mounting options, SpectrAlert Advance can meet virtu ally any application requirement.\u003c\/p\u003e\u003cp\u003eWall-mount outdoor speakers and speaker strobes can be used indoors or outdoors in wet or dry applications, and can provide reliable operation from -40ºF to 151ºF. These speakers provide a broad frequency response range, low harmonic distortion and maintain a high sound pressure level at all tap settings to provide accurate and intelligible broadcast of evacuation messages.\u003c\/p\u003e\u003cp\u003eLike the entire SpectrAlert Advance line, wall-mount outdoor speakers and speaker strobes include a variety of features that increase application flexibility and simplify installation. First, field-selectable settings, including candela, speaker voltage and power settings, and automatic selection of 12- or 24-volt operation enable installe rs to easily adapt devices to meet requirements.\u003c\/p\u003e\u003cp\u003eNext, these devices use a universal mounting plate with an onboard shorting spring that ensures wiring continuity before devices are installed, so installers can verify proper wiring without mounting the devices and exposing them to potential construction damage. Once the plates are mounted, all SpectrAlert Advance devices utilize a plug-in design with a single captured screw to speed installation and virtually eliminate costly ground faults.\u003c\/p\u003e\u003cp\u003eOutdoor devices ship with weatherproof plastic back boxes (metal back boxes are available separately) that accommodate in-andout wiring for daisy chaining devices. Plastic back boxes feature removable side flanges and improved resistance to saltwater corro sion. Knock-outs located on the back eliminate the need to drill holes for screw-in mounting. Plastic and metal weatherproof back boxes come with 3\/4-inch top and bottom conduit entries and 3\/4-inch knock-outs at the back. A screw-in NPT plug with an O -ring gasket 75S0 7320-1653:201 10-08-E for a watertight seal is included with each back box.\u003c\/p\u003e\u003cp\u003eThe SpectrAlert Advance series offers the broadest line of outdoor speakers and speaker strobes in the industry. From metal and plastic outdoor back boxes, to white and red plastic housings, to wall and ceiling mounting options, SpectrAlert Advance can meet virtually any application requirement. SpectrAlert Advance outdoor speakers and speaker strobes can be used indoors or outdoors in wet or dry applications, and can provide reliable operation from -40°F to 151°F. In addition, these speakers provide a broad frequency response range, low harmonic distortion and maintain a high sound pressure level at all tap settings to provide accurate and intelligible broadcast of evacuation messages.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195166269675,"sku":"674492","price":151.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-SPSRK.jpg?v=1786476650"},{"product_id":"system-sensor-d4120w-smoke-detector-duct-smoke-detector","title":"System Sensor D4120W - Smoke Detector - Duct Smoke Detector,","description":"System Sensor D4120W | Watertight 4-Wire Photoelectric Duct Smoke Detector, 24VDC\/120VAC\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe InnovairFlex D4120W watertight 4-wire photoelectric duct smoke detector is UL listed as a watertight enclosure providing protection against falling dirt, rain, windblown dust, splashing and hose directed water. D4120W duct smoke detector features a pivoting housing that fits various applications: both square and rectangular footprints mount to round or rectangular ductwork.\u003c\/p\u003e\u003cp\u003eThis unit senses smoke in the most challenging conditions, operating in airflow speeds of 100 to 4,000 feet per minute, temperatures of -4ºF to 158ºF, and a humidity range of 0 to 95 percent (noncondensing). A plug-in sensor head offers superior false alarm immunity. These features, plus a NEMA 4 rating, allow operators to mount the detector to rooftop HVAC equipment or use the detector in other harsh environments.\u003c\/p\u003e\u003cp\u003eThe new design provides the same form, fit, and wiring terminations as the standard InnovairFlex unit. Superior test and operational features added to the standard model are also available in this watertight unit. As the only watertight duct smoke detector on the market, D4120W provides unsurpassed environmental protection while simplifying installation, testing, and maintenance.\u003c\/p\u003e\u003cp\u003eThis InnovairFlex duct smoke detector can be customized to meet local codes and specifications without additional wiring. The new InnovairFlex product line is compatible with all previous Innovair models, including remote test accessories.\u003c\/p\u003e\u003cp\u003eWARNING: Duct smoke detectors are NOT a substitute for open area smoke detectors; NOT a substitute for early warning detection; NOT a replacement for a building’s regular fire detection system. Refer to NFPA 72 and 90A for additional information.\u003c\/p\u003e\u003cp\u003eNOTE: To maintain the watertight properties of this duct smoke detector, watertight conduit and fittings must be used. Mount the product with the conduit holes facing downwards, if possible\u003c\/p\u003e\u003cp\u003eThe InnovairFlex D4120W watertight 4-wire photoelectric duct smoke detector is UL listed as a watertight enclosure providing protection against falling dirt, rain, windblown dust, splashing and hose directed water. D4120W duct smoke detector features a pivoting housing that fits various applications: both square and rectangular footprints mount to round or rectangular ductwork.\u003c\/p\u003e\u003cp\u003eThis unit senses smoke in the most challenging conditions, operating in airflow speeds of 100 to 4,000 feet per minute, temperatures of –4°F to 158°F, and a humidity range of 0 to 95 percent (noncondensing). A plug-in sensor head offers superior false alarm immunity.\u003c\/p\u003e\u003cp\u003eThese features, plus a NEMA 4 rating, allow operators to mount the detector to rooftop HVAC equipment or use the detector in other harsh environments. The new design provides the same form, fit, and wiring terminations as the standard InnovairFlex unit. Superior test and operational features added to the standard model are also available in this watertight unit.\u003c\/p\u003e\u003cp\u003eAs the only watertight duct smoke detector on the market, D4120W provides unsurpassed environmental protection while simplifying installation, testing, and maintenance.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195166302443,"sku":"674181","price":400.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-D4120W.jpg?v=1786476650"},{"product_id":"system-sensor-ssm24-10-alarm-alarm-bell-24-vdc-10","title":"System Sensor SSM24-10 - Alarm - Alarm Bell, 24 Vdc, 10\"","description":"System Sensor SSM24-10 | Alarm Bell, 24 V DC, 10\"\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe SSM and SSV series provide loud resonant tones. The SSM series operates on 24 V DC and are motor driven, while the SSV series operates on 120 V AC utilizing a vibrating mechanism.\u003c\/p\u003e\u003cp\u003eFor indoor use, the SSM and SSV series mount to a standard four-inch square electrical box. For outdoor applications, weatherproof back box, model number WBB, is used.\u003c\/p\u003e\u003cp\u003eThe SSM and SSV series come pre-wired, to reduce installation time. The SSM series incorporates a polarized electrical design for use with supervision circuitry.\u003c\/p\u003e\u003cp\u003eSystem Sensor’s SSM and SSV series alarm bells are low current, high decibel notification appliances for use in fire and burglary systems or other signaling applications.\u003c\/p\u003e\u003cp\u003eReliable Performance.The SSM and SSV series provide loud resonant tones. The SSM series operate on 24VDC and are motor driven, while the SSV series operate on 120VAC utilizing a vibrating mechanism.\u003c\/p\u003e\u003cp\u003eSimplified Installation.For indoor use, the SSM and SSV series mount to a standard 4 inch square electrical box. For outdoor applications, weatherproof back box, model number WBB, is used.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195166761195,"sku":"674531","price":103.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-SSM2410.jpg?v=1786476652"},{"product_id":"system-sensor-ssm24-6-alarm-alarm-bell-24-vdc-6","title":"System Sensor SSM24-6 - Alarm - Alarm Bell, 24 Vdc, 6\"","description":"System Sensor SSM24-6 | Alarm Bell, 24 V DC, 6\"\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe SSM and SSV series provide loud resonant tones. The SSM series operates on 24 V DC and are motor driven, while the SSV series operates on 120 V AC utilizing a vibrating mechanism.\u003c\/p\u003e\u003cp\u003eFor indoor use, the SSM and SSV series mount to a standard four-inch square electrical box. For outdoor applications, weatherproof back box, model number WBB, is used.\u003c\/p\u003e\u003cp\u003eThe SSM and SSV series come pre-wired, to reduce installation time. The SSM series incorporates a polarized electrical design for use with supervision circuitry.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195167187179,"sku":"674533","price":70.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-SSM246.jpg?v=1786476654"},{"product_id":"system-sensor-ssm24-8-alarm-alarm-bell-24-vdc-8","title":"System Sensor SSM24-8 - Alarm - Alarm Bell, 24 Vdc, 8\"","description":"System Sensor SSM24-8 | Alarm Bell, 24 V DC, 8\"\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe SSM and SSV series provide loud resonant tones. The SSM series operates on 24 V DC and are motor driven, while the SSV series operates on 120 V AC utilizing a vibrating mechanism.\u003c\/p\u003e\u003cp\u003eFor indoor use, the SSM and SSV series mount to a standard four-inch square electrical box. For outdoor applications, weatherproof back box, model number WBB, is used.\u003c\/p\u003e\u003cp\u003eThe SSM and SSV series come pre-wired, to reduce installation time. The SSM series incorporates a polarized electrical design for use with supervision circuitry.\u003c\/p\u003e\u003cp\u003eReliable Performance\u003c\/p\u003e\u003cp\u003eThe SSM and SSV series provide loud resonant tones. The SSM series operate on 24VDC and are motor driven, while the SSV series operate on 120VAC utilizing a vibrating mechanism.\u003c\/p\u003e\u003cp\u003eSimplified Installation\u003c\/p\u003e\u003cp\u003eFor indoor use, the SSM and SSV series mount to a standard 4 inch square electrical box. For outdoor applications, weatherproof back box, model number WBB, is used.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195167449323,"sku":"674535","price":86.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-SSM248.jpg?v=1786476656"},{"product_id":"system-sensor-ssv120-10-alarm-alarm-bell-120-vac-10","title":"System Sensor SSV120-10 - Alarm - Alarm Bell, 120 Vac, 10\"","description":"System Sensor SSV120-10 | Alarm Bell, 120 V AC, 10\"\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe SSM and SSV series provide loud resonant tones. The SSM series operates on 24 V DC and are motor driven, while the SSV series operates on 120 V AC utilizing a vibrating mechanism.\u003c\/p\u003e\u003cp\u003eFor indoor use, the SSM and SSV series mount to a standard four-inch square electrical box. For outdoor applications, weatherproof back box, model number WBB, is used.\u003c\/p\u003e\u003cp\u003eThe SSM and SSV series come pre-wired, to reduce installation time. The SSM series incorporates a polarized electrical design for use with supervision circuitry.\u003c\/p\u003e\u003cp\u003eReliable Performance\u003c\/p\u003e\u003cp\u003eThe SSM and SSV series provide loud resonant tones. The SSM series operate on 24VDC and are motor driven, while the SSV series operate on 120VAC utilizing a vibrating mechanism.\u003c\/p\u003e\u003cp\u003eSimplified Installation\u003c\/p\u003e\u003cp\u003eFor indoor use, the SSM and SSV series mount to a standard 4 inch square electrical box. For outdoor applications, weatherproof back box, model number WBB, is used.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195168268523,"sku":"674537","price":92.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-SSV12010.jpg?v=1786476660"},{"product_id":"system-sensor-mhw-horn-mini-horn-white","title":"System Sensor MHW - Horn - Mini Horn White","description":"System Sensor MHW | Mini-Horn, 12\/24 Volt, Indoor, Wall mount, White\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe MHR and MHW mini-horns operate at 12 and 24 volts and are ideal for hotel, motel or residential fire system applications, where a smaller notification device is desired. The mini-horns offer high and low volume settings, and temporal or non-tempora l tones. The horns can be mounted to single gang back boxes for aesthetically sensitive applications. Synchronization is also provided when using the MDL module.\u003c\/p\u003e\u003cp\u003eThe MHR and MHW mini-horns can operate between 32 and 120 degrees Fahrenheit from a regulated DC or full-wave rectified, unfiltered power supply. They are listed to Underwriter’s Laboratories Standard UL 464 for fire protective signaling systems.\u003c\/p\u003e\u003cp\u003eThe SpectrAlert Advance series of mini-horn sounders are designed to simplify installations to provide primary and secondary signaling for fire and security applications.The MHR and MHW mini-horns operate at 12V and 24V and are ideal for hotel, motel or residential fire system applications, where a smaller notification device is desired. The mini-horns offer high and low volume settings, and temporal or non-temporal tones. The horns can be mounted to single gang back boxes for aesthetically sensitive applications.Synchronization is also provided when using the MDL module. The MHR and MHW mini-horns can operate between 32 and 120 degrees Fahrenheit from a regulated DC or full-wave rectified, unfiltered power supply. They are listed to Underwriter’s Laboratories Standard UL 464 for fire protective signaling systems.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195169972459,"sku":"674261","price":23.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-MHW.jpg?v=1786476668"},{"product_id":"system-sensor-ra100z-siren-remote-annunciator","title":"System Sensor RA100Z - Siren - Remote Annunciator","description":"System Sensor RA100Z | Remote Annunciator\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe APA151 piezo annunciator, which replaces the APA451 with a new, improved look, provides an audible alarm signal, a red LED to indicate alarm status, and a green LED to indicate power status. It is intended for use with System Sensor 4-wire conventi onal duct smoke detector applications without a system control panel, to comply with NFPA 90A.\u003c\/p\u003e\u003cp\u003eExpand the versatility of the InnovairFlex line of duct smoke detectors with System Sensor notification and test accessories.\u003c\/p\u003e\u003cp\u003eThe RA100Z and RA100ZA remote annunciators are designed for both conventional and intelligent applications. Their red LED provides visual indication of an alarm condition.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195170267371,"sku":"674400","price":33.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-RA100Z.jpg?v=1786476671"},{"product_id":"system-sensor-lens-b-lens-colored-lens-wall-blue","title":"System Sensor LENS-B - Lens - Colored Lens, Wall, Blue","description":"System Sensor LENS-B | Colored Lens, Wall, Blue\u003cbr\u003e\u003cbr\u003e\u003cp\u003eColor Lens Attachments install easily on any indoor or outdoor SpectrAlert Advance strobe devices to provide distinctive visual signaling.\u003c\/p\u003e\u003cp\u003eSystem Sensor offers a wide range of Audible Visible (AV) accessories to enable you to meet a variety of application requirements.\u003c\/p\u003e\u003cp\u003eColor Lens Attachments install easily on any indoor or outdoor SpectrAlert Advance strobe devices to provide distinctive visual signaling.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195172266219,"sku":"674249","price":24.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-LENSB.jpg?v=1786476681"},{"product_id":"system-sensor-pc2wk-siren-2-wire-horn-strobe-ceiling","title":"System Sensor PC2WK - Siren - 2 Wire Horn\/Strobe Ceiling","description":"System Sensor PC2WK | Horn\/Strobe, 2-wire, Standard-candela, Outdoor, Ceiling Mount, with Backbox, White\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSpectrAlert Advance offers the broadest line of outdoor horns, strobes, and horn strobes in the industry. With white or red plastic housings, wall or ceiling mounting options, and plain or FIRE-printed devices, SpectrAlert Advance can meet virtually an y application requirement, including indoor, outdoor, wet, and dry applications in temperatures from -40ºF to 151ºF.\u003c\/p\u003e\u003cp\u003eLike the entire SpectrAlert Advance line, outdoor strobes and horn strobes for ceiling applications include a variety of features that increase application flexibility and simplify installation. First, fieldselectable settings, including candela, automatic selection of 12- or 24-volt operation, horn tones, and three volume options enable installers to easily adapt devices to meet re quirements.\u003c\/p\u003e\u003cp\u003eNext, SpectrAlert Advance devices use a universal mounting plate for both wall and ceiling applications. This mounting plate includes an onboard shorting spring that ensures wiring continuity before devices are installed, so installers can verify proper wiring without mounting the devices and exposing them to potential construction damage. Once the plates are mounted, all SpectrAlert Advance devices utilize a plug-in design with a single captured screw to speed installation and virtual ly eliminate costly ground faults.\u003c\/p\u003e\u003cp\u003eOutdoor devices ship with weatherproof plastic back boxes (metal back boxes are available separately) that accommodate in-andout wiring for daisy chaining devices. Plastic back boxes feature removable side flanges and improved resistance to saltwater corrosion. Plastic and metal weatherproof back boxes come with 3\/4-inch top and bottom conduit entries and 3\/4-inch knock-outs at the back. Three screw-in NPT plugs with O-ring gaskets for a watertight seal is includ ed with each back box.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195172593899,"sku":"674356","price":116.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-PC2WK.jpg?v=1786476682"},{"product_id":"system-sensor-pc2whk-siren-2-wire-horn-strobe-ceiling-hi","title":"System Sensor PC2WHK - Siren - 2 Wire Horn\/Strobe Ceiling Hi","description":"System Sensor PC2WHK | SpectrAlert Advance Outdoor Selectable Output Horn Strobe, 2-Wire, High CD, Ceiling Mount, FIRE Marking, White\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSpectrAlert Advance offers the broadest line of outdoor horns, strobes, and horn strobes in the industry. With white or red plastic housings, wall or ceiling mounting options, and plain or FIRE-printed devices, SpectrAlert Advance can meet virtually any application requirement, including indoor, outdoor, wet, and dry applications in temperatures from -40F to 151F.\u003c\/p\u003e\u003cp\u003eLike the entire SpectrAlert Advance line, outdoor strobes and horn strobes for ceiling applications include a variety of features that increase application flexibility and simplify installation. First, fieldselectable settings, including candela, automatic selection of 12- or 24-volt opera tion, horn tones, and three volume options enable installers to easily adapt devices to meet requirements.\u003c\/p\u003e\u003cp\u003eNext, SpectrAlert Advance devices use a universal mounting plate for both wall and ceiling applications. This mounting plate includes an onboard shorting spring that ensures wiring continuity before devices are installed, so installers can verify proper wiring without mounting the devices and exposing them to potential construction damage. Once the plates are mounted, all SpectrAlert Advance devices utilize a plug-in design with a single captured screw to speed installation and virtually eliminate costly ground faults.\u003c\/p\u003e\u003cp\u003eOutdoor devices ship with weatherproof plastic back boxes (metal back boxes are available separately) that accommodate in-andout wiring for daisy chaining devices. Plastic back boxes feature removable side flanges and improved resistance to saltwater corrosion. Plastic and metal weatherproof back boxes come with 3\/4-inch top and bottom conduit entries and 3\/4-inch knock -outs at the back. Three screw-in NPT plugs with O-ring gaskets for a watertight seal is included with each back box.\u003c\/p\u003e\u003cp\u003eSpectrAlert Advance outdoor audible visible products are rich with features that cut installation times and maximize profits.\u003c\/p\u003e\u003cp\u003eSpectrAlert Advance offers the broadest line of outdoor horns, strobes, and horn strobes in the industry. With white or red plastic housings, wall or ceiling mounting options, and plain or FIRE-printed devices, SpectrAlert Advance can meet virtually any application requirement, including indoor, outdoor, wet, and dry applications in temperatures from -40°F to 151°F.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195172626667,"sku":"674350","price":125.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-PC2WHK.jpg?v=1786476682"},{"product_id":"system-sensor-beamlrk-kit-beam-long-range-reflective-kit","title":"System Sensor BEAMLRK - Kit - Beam Long Range Reflective Kit","description":"System Sensor BEAMLRK | Beam Long Range Reflective Kit","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195179901163,"sku":"674143","price":190.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-BEAMLRK.jpg?v=1786476722"},{"product_id":"system-sensor-r-24t-relay-relay-4-gang-dpdt","title":"System Sensor R-24T - Relay - Relay, 4-Gang, Dpdt,","description":"System Sensor R-24T | Relay, 4-Gang, Single (DPDT), Multivolt, Track Mount\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe R-10T, R-20T, R-14T, and the R-24T models are multivoltage relays with terminal strip field wiring connections, mounting track, and hardware. The R-10T is a single FORM-C (SPDT) relay with a red activation LED, and the R-14T is a four-gang 1 FORM-C (SPDT) relay with four red activation LEDs. The R-20T is a single 2 FORM-C (DPDT) relay with a red activation LED, and the R-24T is a four-gang 2 FORM-C (DPDT) relay with four red activation LEDs.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195180654827,"sku":"674399","price":130.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-R24T.jpg?v=1786476725"},{"product_id":"system-sensor-sa-wbbc-enclosure-separate-ship-ceiling-mount","title":"System Sensor SA-WBBC - Enclosure - Separate Ship Ceiling-Mount","description":"System Sensor SA-WBBC | Back Box, Separate Ship, Ceiling-mount, Outdoor\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSpectrAlert Advance Outdoor Back Boxes ensure a NEMA 4X weatherproof listing for AV devices. In locations where you have a hard surface to mount to, Surface Mount Back boxes are the best solution.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195180785899,"sku":"674410","price":51.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-SAWBBC.jpg?v=1786476725"},{"product_id":"system-sensor-lens-a-lens-colored-lens-wall-amber","title":"System Sensor LENS-A - Lens - Colored Lens, Wall, Amber","description":"System Sensor LENS-A | Colored Lens, Wall, Amber\u003cbr\u003e\u003cbr\u003e\u003cp\u003eColor Lens Attachments install easily on any indoor or outdoor SpectrAlert Advance strobe devices to provide distinctive visual signaling.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195181900011,"sku":"674247","price":24.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/System-Sensor-LENS-A-Colored-Lens-Wall-Amber-Main.jpg?v=1786476731"},{"product_id":"system-sensor-lens-bc-lens-colored-lens-ceiling-blue","title":"System Sensor LENS-BC - Lens - Colored Lens, Ceiling, Blue","description":"System Sensor LENS-BC | Colored Lens, Ceiling, Blue\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe System Sensor SpectrAlert Advance color lens attachments come in four colors-amber, blue, green and red-for mass notification, severe weather, emergency response and other non-fire applications. The lenses easily attach to any plain (non-FIRE-printed) SpectrAlert Advance strobes horn strobes, speaker strobes and strobe-only devices. The lenses may be used with wall or ceiling strobes in indoor or outdoor applications.\u003c\/p\u003e\u003cp\u003eEach lens ships with a clear adhesive on the bottom surface. The lens is then aligned with the clear strobe and applied.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195182162155,"sku":"674250","price":25.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-LENSBC.jpg?v=1786476731"},{"product_id":"system-sensor-wtp-plate-weatherproof-plate-red-for","title":"System Sensor WTP - Plate - Weatherproof Plate, Red, For","description":"System Sensor WTP | Weatherproof Plate for Outdoor Strobes and Horns, Flush-Mount, Red\u003cbr\u003e\u003cbr\u003e\u003cp\u003eWTP Series Weatherproof Plates enable installers to flush mount outdoor horns, strobes, horn strobes, speakers, and speaker strobes to a variety of wall surfaces, including brick, ceramic tile, concrete, and masonry brick. These NEMA 3R-rated plates co me in red and white to suit aesthetic and functional requirements.\u003c\/p\u003e\u003cp\u003eCompatible with outdoor devices, which can be used in indoor and outdoor environments, as required by conditions. They easily attach to the SpectrAlert Advance universal mounting plate.\u003c\/p\u003e\u003cp\u003eThe WTP series weatherproof plates enable installers to flush mount outdoor horns, strobes, horn strobes, speakers, and speaker strobes to a variety of wall surfaces, including brick, ceramic tile, concrete, and masonry brick.\u003c\/p\u003e\u003cp\u003eThe SpectrAlert Advance WTP is a red weatherproof mounting plate for flush mounting outdoor K series horns and horn strobes. Especially for use with SpectrAlert Advance replacement outdoor models.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195182489835,"sku":"674637","price":43.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-WTP.jpg?v=1786476734"},{"product_id":"system-sensor-wtpw-plate-weatherproof-plate-white","title":"System Sensor WTPW - Plate - Weatherproof Plate, White,","description":"System Sensor WTPW | Weatherproof Plate, White, for Flush Outdoor K Series Horns and Horn Strobes\u003cbr\u003e\u003cbr\u003e\u003cp\u003eWTP Series Weatherproof Plates enable installers to flush mount outdoor horns, strobes, horn strobes, speakers, and speaker strobes to a variety of wall surfaces, including brick, ceramic tile, concrete, and masonry brick. These NEMA 3R-rated plates co me in red and white to suit aesthetic and functional requirements.\u003c\/p\u003e\u003cp\u003eCompatible with our outdoor devices, which can be used in indoor and outdoor environments, as required by conditions. They easily attach to the SpectrAlert Advance universal mounting plate.\u003c\/p\u003e\u003cp\u003eThe WTP series weatherproof plates enable installers to flush mount outdoor horns, strobes, horn strobes, speakers, and speaker strobes to a variety of wall surfaces, including brick, ceramic tile, concrete, and masonry brick.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195183276267,"sku":"674646","price":43.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-WTPW.jpg?v=1786476737"},{"product_id":"system-sensor-dst1-accessory-duct-sampling-tube-12-with","title":"System Sensor DST1 - Accessory - Duct Sampling Tube, 12\" With","description":"System Sensor DST1 | Metal Sampling Tube for DNRE and D2E, Duct Width up to 1' (0.3m)\u003cbr\u003e\u003cbr\u003e\u003cp\u003eDuct smoke detector accessories add functionality to the duct smoke detection system by allowing quick, convenient inspections at eye level and effective audible and visible notification options. All System Sensor duct smoke detectors and accessories a re UL listed.\u003c\/p\u003e\u003cp\u003eThe InnovairFlex product line offers the same testing and inspection features to meet any code with existing Innovair accessories.\u003c\/p\u003e\u003cp\u003eSystem Sensor provides system flexibility with a variety of accessories, including two remote test stations and several different means of visible and audible system annunciation. As with our duct detectors, all duct smoke detector accessories are UL listed.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195188781291,"sku":"674203","price":15.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-DST1.jpg?v=1786476763"},{"product_id":"system-sensor-d4120-smoke-detector-duct-smoke-detector","title":"System Sensor D4120 - Smoke Detector - Duct Smoke Detector,","description":"System Sensor D4120 | Duct Smoke Detector, 4-wire, Photoelectric, Low-flow\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe InnovairFlex D4120 4-wire photoelectric duct smoke detector features a pivoting housing that fits both square and rectangular footprints and mounts to round or rectangular ductwork. This unit senses smoke in the most challenging conditions, operati ng in airflow speeds of 100 to 4,000 feet per minute, temperatures of -4ºF to 158ºF, and a humidity range of 0 to 95 percent (noncondensing). A plug-in sensor head offers improved false alarm immunity and simple installation, testing, and maintenance. An improved cover design isolates the sensor head from the low-flow feature for simple maintenance.\u003c\/p\u003e\u003cp\u003eThe InnovairFlex housing provides ample wiring space, a 3\/4-inch conduit knockout, and built-in short circuit protection to prevent damage to sensitive components during installation. High contrast terminal designations make wiring easy. With its 2:1 sensor-to-power capability, the power board of the D4120 may be used to monitor a second sensor, D4S, simultaneously (i.e., supply and return side). As many as 50 InnovairFlex detectors can be interconnected. When one unit senses smoke, all interconnected detectors will switch their relays; only the detector sensing smoke will go into alarm, thus pinpointing the fire source.\u003c\/p\u003e\u003cp\u003eAn easy-access Test\/Reset button makes it possible to test the unit with the cover on. Three DIP switches can be used to configure field selectable settings: cover tamper delay, number of sensors to be controlled, and shut down on trouble option. Each power board has two LED s that can be used to indicate the status of connected sensors, and a quick reference imprinted on the cover explains the LED status indications (Standby, Maintenance, Trouble, and Alarm). The InnovairFlex duct smoke detector can be customized to meet local codes and specifications without additional wiring. The new InnovairFlex product line is compatible with all previous Innovair models, including remote test accessories.\u003c\/p\u003e\u003cp\u003eWARNING: Duct smoke detectors are NOT a substitute for open area smoke detectors; NOT a substitute for early warning detection; NOT a replacement for a building’s regular fire detection system.\u003c\/p\u003e\u003cp\u003eThe InnovairFlex D4120 4-wire photoelectric duct smoke detector features a pivoting housing that fits both square and rectangular footprints and mounts to round or rectangular ductwork. This unit senses smoke in the most challenging conditions, operating in airflow speeds of 100 to 4,000 feet per minute, temperatures of –4°F to 158°F, and a humidity range of 0 to 95 percent (noncondensing). A plug-in sensor head offers improved false alarm immunity and simple installation, testing, and maintenance. An improved cover design isolates the sensor head from the low-flow feature for simple maintenance.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195190092011,"sku":"674179","price":296.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-D4120.jpg?v=1786476770"},{"product_id":"system-sensor-dh400oe-1-smoke-detector-duct-smoke-detector-outdoor","title":"System Sensor DH400OE-1 - Smoke Detector - Duct Smoke Detector, Outdoor","description":"System Sensor DH400OE-1 | Enclosure, Duct Smoke Detector, Weatherproof\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe DH400OE-1 all-weather outdoor enclosure is specifically designed to protect the System Sensor duct smoke detector from harsh elements. This enclosure provides protection in outdoor installations against rain, sleet, and snow or indoors against drip ping water.\u003c\/p\u003e\u003cp\u003eThis pre-drilled enclosure comes factory ready to fit any System Sensor duct smoke detector. Fabricated from durable 14-gauge galvanized steel, the enclosure has a durable gray, polyester, powder-coated finish for added protection against rust and corrosion.\u003c\/p\u003e\u003cp\u003eThe slip-on removable cover is secured with a pair of plated steel screws along the bottom edge.\u003c\/p\u003e\u003cp\u003eConvenient knock-outs are located along the bottom to facilitate the connection of all types of electrical conduits and casings. Scews are included for mounting the detector into the enclosure.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195190157547,"sku":"674196","price":499.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-DH400OE1.jpg?v=1786476770"},{"product_id":"system-sensor-etx-accessory-duct-exhaust-tube-1-0-ft","title":"System Sensor ETX - Accessory - Duct Exhaust Tube, 1.0 Ft.","description":"System Sensor ETX | 1' Steel Exhaust Tube, for use with HVAC Duct Smoke Detection and Monitoring Products\u003cbr\u003e\u003cbr\u003e\u003cp\u003eDuct smoke detector accessories add functionality to the duct smoke detection system by allowing quick, convenient inspections at eye level and effective audible and visible notification options. All System Sensor duct smoke detectors and accessories a re UL listed.\u003c\/p\u003e\u003cp\u003eThe MOD2W maximizes the benefits of the i3 Series smoke detectors by enabling detector remote maintenance signaling and EZ Walk loop testing capabilities of models 2W-B and 2WT-B.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195190747371,"sku":"674232","price":11.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-ETX.jpg?v=1786476773"},{"product_id":"system-sensor-co1224t-detector-carbon-monoxide-detector","title":"System Sensor CO1224T - Detector - Carbon Monoxide Detector","description":"System Sensor CO1224T | Carbon Monoxide Detector, 12\/24 V DC, with Sounder and Trouble Relay with Test Function\u003cbr\u003e\u003cbr\u003e\u003cp\u003eWith RealTest technology, the CO gas sensing cell used in the CO1224T and CO1224TR CO detectors can be tested using a CO gas agent, fully meeting the requirements of NFPA 720: 2009. Simply put the detector into RealTest mode, spray a small amount of C O into the detector per the installation instructions, and within seconds the detector will alarm, indicating successful gas entry.\u003c\/p\u003e\u003cp\u003eWhen dangerous amounts of CO are detected, the CO1224T and CO1224TR detectors alert residents by sounding and flasng a temp 4 signal alarm. With 24\/7 central station monitoring, residents are guaranteed protection whether they are away from home, sleeping, or already suffering from the effects of CO.\u003c\/p\u003e\u003cp\u003eThe CO1224T and CO1224TR are designed for system operationThese detectors are fully listed to UL 2075 and offer a code-required trouble relay to send a sensor failure or end-of-life signal to the control panel and the central station. The CO1224T and CO1224TR also use SEMS-type terminal Philips head screws fo r quicker and more positive wiring connections and code-required wiring supervision. With a low current draw, these detectors enable more devices to be connected to the panel, limiting the need to purchase extra power supplies or more expensive panels. As 12\/24 V DC detectors, the CO1224T and CO1224TR will operate on most industry security and fire alarm control panels.\u003c\/p\u003e\u003cp\u003eWith RealTest technology, the CO gas sensing cell used in the CO1224T CO detector can be tested using a CO gas agent, fully meeting the requirements of NFPA 720: 2009. Simply put the detector into RealTest mode, spray a small amount of C O into the detector per the installation instructions, and within seconds the detector will alarm, indicating successful gas entry. When dangerous amounts of CO are detected, the CO1224T detector alert residents by sounding and flasng a temp 4 signal alarm. With 24\/7 central station monitoring, residents are guaranteed protection whether they are away from home, sleeping, or already suffering from the effects of CO.\u003c\/p\u003e\u003cp\u003eThe CO1224T is designed for system operationThese detectors are fully listed to UL 2075 and offer a code-required trouble relay to send a sensor failure or end-of-life signal to the control panel and the central station. The CO1224T also uses SEMS-type terminal Philips head screws fo r quicker and more positive wiring connections and code-required wiring supervision. With a low current draw, these detectors enable more devices to be connected to the panel, limiting the need to purchase extra power supplies or more expensive panels. As 12\/24 V DC detectors, CO1224T will operate on most industry security and fire alarm control panels.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195190780139,"sku":"674166","price":116.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-CO1224T.jpg?v=1786476774"},{"product_id":"system-sensor-5603-detector-conventional-heat-detector","title":"System Sensor 5603 - Detector - Conventional Heat Detector,","description":"System Sensor 5603 | Heat Detector, 135F Fixed Temperature, Single-circuit Mechanical\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single- and dual-circuit models are available for low- and high-temperature ratings with either fixed temperature or combination fixed temperature\/r ate-of-rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field-testing.\u003c\/p\u003e\u003cp\u003eTo satisfy a variety of installation needs, the 5600 series easily mounts to single-gang and octagonal back boxes. And these models accommodate four-square back boxes, when used with a square to round plaster ring. The reversible mounting bracket permits both flush- and surface-mount back box installations.\u003c\/p\u003e\u003cp\u003eThe 5600 series provides clear markings on the exterior of the unit to ensure that the proper detector is being used. Alphanumeric characters identify the activation method, as well as the temperature rating, in Fahrenheit and Celsius degrees. Fixed temperature models are identified FX, while combination fixed\/ rate-of-rise unit s are marked FX\/ROR. The 5600 series also provides a post-activation indicator in the form of a collector. When the detector is activated, the collector drops from the unit, making it easy to identify the unit in alarm.\u003c\/p\u003e\u003cp\u003eMultiple configurations. The 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single- and dual-circuit models are available for low- and hightemperature ratings with either fixed temperature or combination fixed temperature\/rate-of-rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field-testing.\u003c\/p\u003e\u003cp\u003eInstallation flexibility. To satisfy a variety of installation needs, the 5600 series easily mounts to single-gang and octagonal back boxes. And these models accommodate four-square back boxes, when used with a square to round plaster ring. The reversible mounting bracket permits both flush- and surface-mount back box installations.\u003c\/p\u003e\u003cp\u003eVisual identification. The 5600 series provides clear markings on the exterior of the unit to ensure that the proper detector is being used. Alphanumeric characters identify the activation method, as well as the temperature rating, in Fahrenheit and Celsius degrees. Fixed temperature models are identified FX, while combination fixed\/ rate-of-rise units are marked FX\/ROR. The 5600 series also provides a post-activation indicator in the form of a collector. When the detector is activated, the collector drops from the unit, making it easy to identify the unit in alarm.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195190976747,"sku":"674109","price":26.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-5603.jpg?v=1786476774"},{"product_id":"system-sensor-5602-detector-conventional-heat-detector","title":"System Sensor 5602 - Detector - Conventional Heat Detector,","description":"System Sensor 5602 | Heat Detector, 194F Fixed\/Rate of rise, Single-circuit Mechanical\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single- and dual-circuit models are available for low- and high-temperature ratings with either fixed temperature or combination fixed temperature\/r ate-of-rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field-testing.\u003c\/p\u003e\u003cp\u003eTo satisfy a variety of installation needs, the 5600 series easily mounts to single-gang and octagonal back boxes. And these models accommodate four-square back boxes, when used with a square to round plaster ring. The reversible mounting bracket permits both flush- and surface-mount back box installations.\u003c\/p\u003e\u003cp\u003eThe 5600 series provides clear markings on the exterior of the unit to ensure that the proper detector is being used. Alphanumeric characters identify the activation method, as well as the temperature rating, in Fahrenheit and Celsius degrees. Fixed temperature models are identified FX, while combination fixed\/ rate-of-rise unit s are marked FX\/ROR. The 5600 series also provides a post-activation indicator in the form of a collector. When the detector is activated, the collector drops from the unit, making it easy to identify the unit in alarm.\u003c\/p\u003e\u003cp\u003eThe 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single and dualcircuit models are available for low and high temperature ratings with either fixed temperature or combination fixed temperature rate of rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field testing.System Sensor’s 5600 series mechanical heat detectors offer a low-cost means for property protection against fire, and for non-life-safety installations where smoke detectors are inappropriate.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195190943979,"sku":"674108","price":26.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-5602.jpg?v=1786476774"},{"product_id":"system-sensor-5621-detector-conventional-heat-detector","title":"System Sensor 5621 - Detector - Conventional Heat Detector,","description":"System Sensor 5621 | 135°F Fixed Temp\/Rate-of-Rise, Dual-Circuit Mechanical Heat Detector\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single- and dual-circuit models are available for low- and high-temperature ratings with either fixed temperature or combination fixed temperature\/r ate-of-rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field-testing.\u003c\/p\u003e\u003cp\u003eTo satisfy a variety of installation needs, the 5600 series easily mounts to single-gang and octagonal back boxes. And these models accommodate four-square back boxes, when used with a square to round plaster ring. The reversible mounting bracket permits both flush- and surface-mount back box installations.\u003c\/p\u003e\u003cp\u003eThe 5600 series provides clear markings on the exterior of the unit to ensure that the proper detector is being used. Alphanumeric characters identify the activation method, as well as the temperature rating, in Fahrenheit and Celsius degrees. Fixed temperature models are identified FX, while combination fixed\/ rate-of-rise unit s are marked FX\/ROR. The 5600 series also provides a post-activation indicator in the form of a collector. When the detector is activated, the collector drops from the unit, making it easy to identify the unit in alarm.\u003c\/p\u003e\u003cp\u003eThe 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single and dualcircuit models are available for low and high temperature ratings with either fixed temperature or combination fixed temperature rate of rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field testing.\u003c\/p\u003e\u003cp\u003eSystem Sensor’s 5600 series mechanical heat detectors offer a low-cost means for property protection against fire, and for non-life-safety installations where smoke detectors are inappropriate.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195191468267,"sku":"674111","price":45.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-5621.jpg?v=1786476777"},{"product_id":"system-sensor-5604-detector-conventional-heat-detector","title":"System Sensor 5604 - Detector - Conventional Heat Detector,","description":"System Sensor 5604 | Heat Detector, 194F Fixed Temperature, Single-circuit Mechanical\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single- and dual-circuit models are available for low- and high-temperature ratings with either fixed temperature or combination fixed temperature\/r ate-of-rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field-testing.\u003c\/p\u003e\u003cp\u003eTo satisfy a variety of installation needs, the 5600 series easily mounts to single-gang and octagonal back boxes. And these models accommodate four-square back boxes, when used with a square to round plaster ring. The reversible mounting bracket permits both flush- and surface-mount back box installations.\u003c\/p\u003e\u003cp\u003eThe 5600 series provides clear markings on the exterior of the unit to ensure that the proper detector is being used. Alphanumeric characters identify the activation method, as well as the temperature rating, in Fahrenheit and Celsius degrees. Fixed temperature models are identified FX, while combination fixed\/ rate-of-rise unit s are marked FX\/ROR. The 5600 series also provides a post-activation indicator in the form of a collector. When the detector is activated, the collector drops from the unit, making it easy to identify the unit in alarm.\u003c\/p\u003e\u003cp\u003eMultiple configurations. The 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single- and dual-circuit models are available for low- and hightemperature ratings with either fixed temperature or combination fixed temperature\/rate-of-rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field-testing.\u003c\/p\u003e\u003cp\u003eInstallation flexibility. To satisfy a variety of installation needs, the 5600 series easily mounts to single-gang and octagonal back boxes. And these models accommodate four-square back boxes, when used with a square to round plaster ring. The reversible mounting bracket permits both flush- and surface-mount back box installations.\u003c\/p\u003e\u003cp\u003eVisual identification. The 5600 series provides clear markings on the exterior of the unit to ensure that the proper detector is being used. Alphanumeric characters identify the activation method, as well as the temperature rating, in Fahrenheit and Celsius degrees. Fixed temperature models are identified FX, while combination fixed\/ rate-of-rise units are marked FX\/ROR. The 5600 series also provides a post-activation indicator in the form of a collector. When the detector is activated, the collector drops from the unit, making it easy to identify the unit in alarm.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195191501035,"sku":"674110","price":26.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-5604.jpg?v=1786476777"},{"product_id":"system-sensor-5623-detector-conventional-heat-detector","title":"System Sensor 5623 - Detector - Conventional Heat Detector,","description":"System Sensor 5623 | 135°F Fixed Temp, Dual-Circuit Mechanical Heat Detector\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single- and dual-circuit models are available for low- and high-temperature ratings with either fixed temperature or combination fixed temperature\/r ate-of-rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field-testing.\u003c\/p\u003e\u003cp\u003eTo satisfy a variety of installation needs, the 5600 series easily mounts to single-gang and octagonal back boxes. And these models accommodate four-square back boxes, when used with a square to round plaster ring. The reversible mounting bracket permits both flush- and surface-mount back box installations.\u003c\/p\u003e\u003cp\u003eThe 5600 series provides clear markings on the exterior of the unit to ensure that the proper detector is being used. Alphanumeric characters identify the activation method, as well as the temperature rating, in Fahrenheit and Celsius degrees. Fixed temperature models are identified FX, while combination fixed\/ rate-of-rise unit s are marked FX\/ROR. The 5600 series also provides a post-activation indicator in the form of a collector. When the detector is activated, the collector drops from the unit, making it easy to identify the unit in alarm.\u003c\/p\u003e\u003cp\u003eMultiple configurations. The 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single- and dual-circuit models are available for low- and hightemperature ratings with either fixed temperature or combination fixed temperature\/rate-of-rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field-testing.\u003c\/p\u003e\u003cp\u003eInstallation flexibility. To satisfy a variety of installation needs, the 5600 series easily mounts to single-gang and octagonal back boxes. And these models accommodate four-square back boxes, when used with a square to round plaster ring. The reversible mounting bracket permits both flush- and surface-mount back box installations.\u003c\/p\u003e\u003cp\u003eVisual identification. The 5600 series provides clear markings on the exterior of the unit to ensure that the proper detector is being used. Alphanumeric characters identify the activation method, as well as the temperature rating, in Fahrenheit and Celsius degrees. Fixed temperature models are identified FX, while combination fixed\/ rate-of-rise units are marked FX\/ROR. The 5600 series also provides a post-activation indicator in the form of a collector. When the detector is activated, the collector drops from the unit, making it easy to identify the unit in alarm\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195191533803,"sku":"674113","price":47.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-5623.jpg?v=1786476777"},{"product_id":"system-sensor-5624-detector-conventional-heat-detector","title":"System Sensor 5624 - Detector - Conventional Heat Detector,","description":"System Sensor 5624 | 194°F Fixed Temp, Dual-Circuit Mechanical Heat Detector\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single- and dual-circuit models are available for low- and high-temperature ratings with either fixed temperature or combination fixed temperature\/r ate-of-rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field-testing.\u003c\/p\u003e\u003cp\u003eTo satisfy a variety of installation needs, the 5600 series easily mounts to single-gang and octagonal back boxes. And these models accommodate four-square back boxes, when used with a square to round plaster ring. The reversible mounting bracket permits both flush- and surface-mount back box installations.\u003c\/p\u003e\u003cp\u003eThe 5600 series provides clear markings on the exterior of the unit to ensure that the proper detector is being used. Alphanumeric characters identify the activation method, as well as the temperature rating, in Fahrenheit and Celsius degrees. Fixed temperature models are identified FX, while combination fixed\/ rate-of-rise unit s are marked FX\/ROR. The 5600 series also provides a post-activation indicator in the form of a collector. When the detector is activated, the collector drops from the unit, making it easy to identify the unit in alarm.\u003c\/p\u003e\u003cp\u003eThe 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single- and dual-circuit models are available for low- and hightemperature ratings with either fixed temperature or combination fixed temperature\/rate-of-rise (ROR) activation. The ROR element of the fixed\/ROR models is restorable to accommodate field-testing. To satisfy a variety of installation needs, the 5600 series easily mounts to single-gang and octagonal back boxes. And these models accommodate four-square back boxes, when used with a square to round plaster ring. The reversible mounting bracket permits both flush- and surface-mount back box installations.\u003c\/p\u003e\u003cp\u003eThe 5600 series provides clear markings on the exterior of the unit to ensure that the proper detector is being used. Alphanumeric characters identify the activation method, as well as the temperature rating, in Fahrenheit and Celsius degrees. Fixed temperature models are identified FX, while combination fixed\/ rate-of-rise units are marked FX\/ROR. The 5600 series also provides a post-activation indicator in the form of a collector. When the detector is activated, the collector drops from the unit, making it easy to identify the unit in alarm.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195191599339,"sku":"674114","price":48.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/SYS-5624.jpg?v=1786476777"}],"url":"https:\/\/www.alldataresource.com\/collections\/system-sensor.oembed","provider":"All Data Resource","version":"1.0","type":"link"}