{"title":"Transmission, Fiber","description":" ","products":[{"product_id":"comnet-cnfe8fx8us-unmanaged-switch-8-port-100mbps-8-fiber","title":"Comnet CNFE8FX8US Unmanaged Switch, 8 Port, 100Mbps, 8 Fiber","description":"The ComNet™ CNFE8US Series Ethernet 8 port unmanaged switch is designed to transmit and receive 10\/100 Mbps data over optical fiber through user selectable SFP options or 10\/100 Mbps data over CAT5E\/6 electrical cable. This unit integrates eight independent 10\/100 Mbps channels in a single package. The CNFE8FX4TX4US and CNFE8FX8US require the ordering of sold-separately interchangeable SFP modules for fiber type, distance and connectors. All electrical interfaces will Auto-Negotiate to 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interfaces operate at a 100 Mbps Ethernet rate. The CNFE8US Series models are environmentally hardened to operate in demanding environments. LED indicators are provided for confirming equipment operating status. These units are interchangeable between stand-alone or card mount configurations.\n\n\u003cbr\u003e\u003cbr\u003e\n\nFeatures\n\n\u003cli\u003e    10\/100\/1000 Mbps Ethernet\n\u003c\/li\u003e\u003cli\u003eAll ports support 1000 Mbps full duplex data\n\u003c\/li\u003e\u003cli\u003eAutomatic MDI\/MDI-X crossover\n\u003c\/li\u003e\u003cli\u003eDesigned to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line\/low-line voltage conditions and transient voltage protection) of \u003c\/li\u003e\u003cli\u003eNEMA TS-1\/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.\n\u003c\/li\u003e\u003cli\u003eNo In-field optical adjustments required\n\u003c\/li\u003e\u003cli\u003eVoltage transient protection on all power and signal input\/output lines provides unconditional protection from power surges and other voltage transient events.\n\u003c\/li\u003e\u003cli\u003ePower and Port status LED indicators\n\u003c\/li\u003e\u003cli\u003eIEEE 802.3 compliant\n\u003c\/li\u003e\u003cli\u003eHot-swappable rack modules\n\u003c\/li\u003e\u003cli\u003eInterchangeable between stand-alone or rack mount use ComFit\n\n\u003cbr\u003e\u003cbr\u003e\n\nSpecs\n\n\u003c\/li\u003e\u003cli\u003eManufacturer    Comnet Communication Networks\n\u003c\/li\u003e\u003cli\u003eCondition    New\n\u003c\/li\u003e\u003cli\u003eData Interface    Ethernet\n\u003c\/li\u003e\u003cli\u003eSurface Mount   9-24 VDC @ 700 mA\n\u003c\/li\u003e\u003cli\u003eRack Mount   From Rack\n\u003c\/li\u003e\u003cli\u003ePower    Terminal Block\n\u003c\/li\u003e\u003cli\u003eOptical   LC or SC (depending on SFP module used)\n\u003c\/li\u003e\u003cli\u003eSurface Mount   9-24 VDC @ 700 mA\n\u003c\/li\u003e\u003cli\u003eCircuit Board   Meets IPC Standard\n\u003c\/li\u003e\u003cli\u003eMTBF    \u0026gt;100,000 hours\n\u003c\/li\u003e\u003cli\u003eOperating Temp   -40? C to +75? C\n\u003c\/li\u003e\u003cli\u003eStorage Temp   -40? C to +85? C\n\u003c\/li\u003e\u003cli\u003eRelative Humidity   0% to 95% (non-condensing)†\u003c\/li\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195764678891,"sku":"598529","price":846.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/CON-CNFE8FX8US.jpg?v=1786479685"},{"product_id":"comnet-cnfe8tx8us-unmanaged-switch-8-port-100mbps-8-copper","title":"Comnet CNFE8TX8US Unmanaged Switch, 8 Port, 100Mbps, 8 Copper","description":"The ComNet™ CNFE8US Series Ethernet 8 port unmanaged switch is designed to transmit and receive 10\/100 Mbps data over optical fiber through user selectable SFP options or 10\/100 Mbps data over CAT5E\/6 electrical cable. This unit integrates eight independent 10\/100 Mbps channels in a single package. The CNFE8FX4TX4US and CNFE8FX8US require the ordering of sold-separately interchangeable SFP modules for fiber type, distance and connectors. All electrical interfaces will Auto-Negotiate to 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interfaces operate at a 100 Mbps Ethernet rate. The CNFE8US Series models are environmentally hardened to operate in demanding environments. LED indicators are provided for confirming equipment operating status. These units are interchangeable between stand-alone or card mount configurations.\n\u003cbr\u003e\u003cbr\u003e\n\nFeatures\n\n\u003cli\u003e    10\/100\/1000 Mbps Ethernet\n\u003c\/li\u003e\u003cli\u003eAll ports support 1000 Mbps full duplex data\n\u003c\/li\u003e\u003cli\u003eAutomatic MDI\/MDI-X crossover\n\u003c\/li\u003e\u003cli\u003eDesigned to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line\/low-line voltage conditions and transient voltage protection) of \u003c\/li\u003e\u003cli\u003eNEMA TS-1\/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.\n\u003c\/li\u003e\u003cli\u003eNo In-field optical adjustments required\n\u003c\/li\u003e\u003cli\u003eVoltage transient protection on all power and signal input\/output lines provides unconditional protection from power surges and other voltage transient events.\n\u003c\/li\u003e\u003cli\u003ePower and Port status LED indicators\n\u003c\/li\u003e\u003cli\u003eIEEE 802.3 compliant\n\u003c\/li\u003e\u003cli\u003eHot-swappable rack modules\n\u003c\/li\u003e\u003cli\u003eInterchangeable between stand-alone or rack mount use ComFit\n\n\u003cbr\u003e\u003cbr\u003e\n\nSpecs\n\n\u003c\/li\u003e\u003cli\u003eManufacturer    Comnet Communication Networks\n\u003c\/li\u003e\u003cli\u003eCondition    New\n\u003c\/li\u003e\u003cli\u003eData Interface    Ethernet\n\u003c\/li\u003e\u003cli\u003eSurface Mount   9-24 VDC @ 700 mA\n\u003c\/li\u003e\u003cli\u003eRack Mount   From Rack\n\u003c\/li\u003e\u003cli\u003ePower    Terminal Block\n\u003c\/li\u003e\u003cli\u003eOptical   LC or SC (depending on SFP module used)\n\u003c\/li\u003e\u003cli\u003eSurface Mount   9-24 VDC @ 700 mA\n\u003c\/li\u003e\u003cli\u003eCircuit Board   Meets IPC Standard\n\u003c\/li\u003e\u003cli\u003eMTBF    \u0026gt;100,000 hours\n\u003c\/li\u003e\u003cli\u003eOperating Temp   -40? C to +75? C\n\u003c\/li\u003e\u003cli\u003eStorage Temp   -40? C to +85? C\n\u003c\/li\u003e\u003cli\u003eRelative Humidity   0% to 95% (non-condensing)†\u003c\/li\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195765268715,"sku":"598531","price":646.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/CON-CNFE8TX8US.jpg?v=1786479687"},{"product_id":"american-fibertek-bps-1-one-slot-blank-panel-cover","title":"American Fibertek BPS-1 One Slot Blank Panel Cover","description":"One Slot Blank Panel Cover.\n\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195766939883,"sku":"743094","price":36.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/American_Fibertek_BPS-1.jpg?v=1786479697"},{"product_id":"american-fibertek-bps-2-two-slot-blank-panel-cover","title":"American Fibertek BPS-2 | Two Slot Blank Panel Cover","description":"\u003cp\u003eSR-20 Blank Filler Panel 2 Slot.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195766972651,"sku":"743095","price":44.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/American-Fibertek-BPS-2-Blank-Panel-Cover-Main.jpg?v=1786479697"},{"product_id":"american-fibertek-mr05b-audio-link-multimode-module-receiver","title":"American Fibertek MR05B | Audio Link Multimode Module Receiver","description":"\u003cp\u003eThe American Fibertek 05B Series transmits single direction line level audio, 600 ohms balanced or unbalanced, on one multimode or singlemode fiber. The audio is transmitted over the link using FM modulation which results in an improved signal to noise ratio and a constant audio output level over the full optical loss budget. Diagnostic indicators provide a quick visual check of system status. Designed to be completely transparent, these links require no field adjustments at installation or additional maintenance thereafter.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195767103723,"sku":"743052","price":347.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/American-Fibertek-MR05B-Receiver-Main.jpg?v=1786479698"},{"product_id":"american-fibertek-bps4-four-slot-blank-panel-cover","title":"American Fibertek BPS4 | Four Slot Blank Panel Cover","description":"\u003cp\u003eSR-20 Blank Filler Panel 4 Slot.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195767234795,"sku":"743096","price":62.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/American-Fibertek-BPS4-Blank-Panel-Cover-Main.jpg?v=1786479699"},{"product_id":"american-fibertek-mr-1600e-video-up-the-coax-module-rx-mm-extended-length","title":"American Fibertek MR-1600E Video\/\" Up the Coax\" Module RX MM Extended Length","description":"Video\/\" Up the Coax\" Module RX MM Extended Length.\n\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195767333099,"sku":"742982","price":982.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/AMF-MR1600E.jpg?v=1786479699"},{"product_id":"american-fibertek-mr220c-two-channel-fm-video-module-receiver","title":"American Fibertek MR220C | Two Channel FM Video Module Receiver","description":"\u003cp\u003eTwo Channel FM Video Module Rx - Single Fiber 1300nm 12dB MM.\u003c\/p\u003e\u003cp\u003eThe MR-220C operates as half of a receiver pair for the transmission of two simultaneous, real time, baseband NTSC, PAL, RS170, or RS343 video signals. The MR-220C is designed to operate with the MT-220C or RT-220C video transmitter over one multimode fiber optic cable. The MR-220C receiver converts a single optical input into a maximum of two video outputs. The 220C Series product is designed to operate over an optical loss budget range of 0 to 12 dB when used on 62.5 um multimode fiber. A maximum distance of 5km can be achieved as long as the overall fiber bandwidth maintains a minimum of 150 MHz at 1300 nm. The MR-220C will also operate on 50 um multimode fiber at a reduced loss budget range. This unit is contained in a compact and rugged extruded aluminum housing with internal dc voltage regulation. The detachable terminal block and LED indicators provide for easy installation and monitoring of video and power. The MR-220C is designed for mounting as a modular stand alone unit. \u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195767496939,"sku":"743054","price":909.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/American-Fibertek-MR220C-Video-Module-Receiver-Main.jpg?v=1786479699"},{"product_id":"american-fibertek-mr-220c-sl-two-channel-fm-video-module-receiver","title":"American Fibertek MR-220C-SL Two Channel FM Video Module Receiver","description":"Two Channel FM Video Module Receiver.\n\u003cbr\u003e\u003cbr\u003e\n\nFeatures\n\n\u003cli\u003eCompatible with NTSC; RS-170A \u0026amp; RS-343A and PAL\n\u003c\/li\u003e\u003cli\u003eDiagnostics: Video, Power and Optical Presence\n\u003c\/li\u003e\u003cli\u003eFull Color Transmission\n\u003c\/li\u003e\u003cli\u003eReal Time Video Transmission\n\u003c\/li\u003e\u003cli\u003eModules or Rack Cards\n\u003c\/li\u003e\u003cli\u003eCompatible with 500 Series Audio\/Data\n\u003c\/li\u003e\u003cli\u003eModulators \u0026amp; Demodulators\n\u003c\/li\u003e\u003cli\u003ePFM Transmission\n\u003cbr\u003e\u003cbr\u003e\t\n\n\nSpecs\n\n\u003c\/li\u003e\u003cli\u003eManufacturer \t                          American Fibertek Inc.\n\u003c\/li\u003e\u003cli\u003eCondition \t                               New\n\u003c\/li\u003e\u003cli\u003e    Video:\n\u003c\/li\u003e\u003cli\u003e    I\/O Level                                                 1 Vpp\n\u003c\/li\u003e\u003cli\u003e    I\/O Impedance                                      75 Ohms\n\u003c\/li\u003e\u003cli\u003e    Bandwidth                                                    10 MHz\n\u003c\/li\u003e\u003cli\u003e    Differential Gain                                             5%\n\u003c\/li\u003e\u003cli\u003e    Differential Phase                                                  3°\n\u003c\/li\u003e\u003cli\u003e    SNR                                                                  55 dB\n\u003c\/li\u003e\u003cli\u003e    Connector                                                      BNC\n\u003c\/li\u003e\u003cli\u003e    Optical:\n\u003c\/li\u003e\u003cli\u003e    Wavelengths                                                1300 nm\n\u003c\/li\u003e\u003cli\u003e    Maximum Transmission Distance                           5 Km\n\u003c\/li\u003e\u003cli\u003e    Loss Budget (62.5\/125?)                                      12 dB\n\u003c\/li\u003e\u003cli\u003e    Connector                                                                     ST\n\u003c\/li\u003e\u003cli\u003e    Temperature (Operating):     -40°C to +75°C, non-condensing\n\u003c\/li\u003e\u003cli\u003e    Power Supply:\n\u003c\/li\u003e\u003cli\u003e    Module Transmitter -     24 VAC Center Tap (AFI Part : PS-24-CT-T)\n\u003c\/li\u003e\u003cli\u003e    Module Receiver -         24 VAC Center Tap (AFI Part : PS-24-CT-T)\n\u003c\/li\u003e\u003cli\u003e    Size:\n\u003c\/li\u003e\u003cli\u003e    Module Receiver - 87?8” x 51?2” x 11?8”\n\u003c\/li\u003e\u003cli\u003e    Module Transmitter - 87?8” x 51?2” x 11?8”\n\u003c\/li\u003e\u003cli\u003e    Rack Card Receiver requires 2 rack slots -     8” x 5” x 2”\n\u003c\/li\u003e\u003cli\u003e    Rack Card Transmitter requires 2 rack slots -     8” x 5” x 2”\n\u003c\/li\u003e\u003cli\u003e    Maximum 7 Rack Cards per SR-20\/2\u003c\/li\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195767529707,"sku":"933178","price":1272.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/AMF-MR220CSL.jpg?v=1786479699"},{"product_id":"american-fibertek-mr81-eight-or-sixteen-channel-contact-closure-system-with-power-fail-safe-normally-open-normally-closed-outputs","title":"American Fibertek MR81 Eight or Sixteen Channel Contact Closure System With Power Fail Safe Normally Open \/ Normally Closed Outputs","description":"Eight or Sixteen Channel Contact Closure System With Power Fail Safe Normally Open \/ Normally Closed Outputs.\n\u003cbr\u003e\u003cbr\u003e\n\nFeatures\n\n\u003cli\u003eForm-C (Normally Open or Normally Closed) Dry\n\u003c\/li\u003e\u003cli\u003eLatching Relays reduce power requirement\n\u003c\/li\u003e\u003cli\u003eUser-Selectable feature maintains Contact Status\nthrough Power-Cycle and Loss-of-Optical-Power\n\u003c\/li\u003e\u003cli\u003eUser Control to Reset all Contact Status\n\u003c\/li\u003e\u003cli\u003eDiagnostics: DC Power, Optical Presence, and\nChannel Indicators\n\u003c\/li\u003e\u003cli\u003eHigh Density DB26 Data Connector with\n\u003c\/li\u003e\u003cli\u003eAdaptor to screw terminal\n\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195768021227,"sku":"743098","price":1265.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/American_Fibertek_MR81.jpg?v=1786479701"},{"product_id":"american-fibertek-mr89d-intercom-system-for-dukane-module-receiver","title":"American Fibertek MR89D | Intercom System for Dukane Module Receiver","description":"\u003cp\u003eIntercom System for Dukane Starcall Module Receiver 850\/1300nm 12dB MM - 1 Fiber.\u003c\/p\u003e\u003cp\u003eThe American Fibertek 89D Series transmits one channel of high-quality low distortion bi-directional audio\/contact closure on one multimode optical fiber.Designed to be completely transparent, the system field microphone and audio levels can be adjusted to balance and optimize signal levels. Diagnostic indicators provide a quick visual indication of system status.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195768840427,"sku":"743059","price":878.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/American-Fibertek-MR89D-Receiver-Main.jpg?v=1786479708"},{"product_id":"american-fibertek-mrm-1400-video-rs422-module-rx-mm","title":"American Fibertek MRM-1400 Video\/RS422 Module RX MM","description":"American Fibertek MRM-1400 Video\/RS422 Module RX MM.\n\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195769102571,"sku":"258424","price":811.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/AMF-MRM1400.jpg?v=1786479708"},{"product_id":"american-fibertek-mrm1605p-video-panasonic-proteus-module-receiver","title":"American Fibertek MRM1605P Video\/Panasonic Proteus Module Receiver","description":"American Fibertek MRM1605P Video\/Panasonic Proteus Module Receiver.\r\n\u003cbr\u003e\u003cbr\u003e ","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195769430251,"sku":"339171","price":1627.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/American_Fibertek_MRM1605P.jpg?v=1786479710"},{"product_id":"american-fibertek-mrx46fxst-single-fiber-10-100-ethernet-module-rx","title":"American Fibertek MRX46FXST Single Fiber 10\/100 Ethernet) Module Rx","description":"Single Fiber 10\/100 Ethernet) Module Rx.\n\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195769692395,"sku":"742892","price":665.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/American_Fibertek_MRX46FXST.jpg?v=1786479712"},{"product_id":"american-fibertek-mt-108-module-tx-video-audio-input-mm","title":"American Fibertek MT-108 Module TX - Video\/Audio Input MM","description":"Module TX - Video\/Audio Input MM.\n\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195769725163,"sku":"743063","price":579.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/AMF-MT108.jpg?v=1786479712"},{"product_id":"american-fibertek-mt-1600e-video-up-the-coax-module-tx-mm-extended-length","title":"American Fibertek MT-1600E Video\/\"Up the Coax\" Module TX MM Extended Length","description":"Video\/\"Up the Coax\" Module TX MM Extended Length.\n\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195769921771,"sku":"742995","price":982.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/AMF-MT1600E.jpg?v=1786479713"},{"product_id":"american-fibertek-mt220c-two-channel-fm-video-module-transmitter","title":"American Fibertek MT220C | Two Channel FM Video Module Transmitter","description":"\u003cp\u003eTwo Channel FM Video Module Tx - Single Fiber 1300nm 12dB MM.\u003c\/p\u003e\u003cp\u003eThe MT-220C operates as half of a transmitter pair for the transmission of two simultaneous, real time, baseband NTSC, PAL, RS170, or RS343 video signals. The MT-220C is designed to operate with the MR-220C or RR-220C two channel video receiver over one multimode fiber optic cable. The MT-220C transmitter accepts up to two video inputs. Each video input modulates a separate FM carrier frequency to allow the total of two video signals to be combined onto one fiber. The 220C Series product is designed to operate over an optical loss budget range of 0 to 12 dB when used on 62.5 um multimode fiber. A maximum distance of 5km can be achieved as long as the overall fiber bandwidth maintains a minimum of 150 MHz at 1300 nm. The MT-220C will also operate on 50 um multimode fiber at a reduced loss budget range. This unit is contained in a compact and rugged extruded aluminum housing with internal dc voltage regulation. The detachable terminal block and LED indicators provide for easy installation and monitoring of video and power supply. The MT-220C is designed for mounting as a modular stand alone unit.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195769987307,"sku":"743065","price":909.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/American-Fibertek-MT220C-Transmitter-Main.jpg?v=1786479713"},{"product_id":"american-fibertek-mt-220c-sl-2-channel-fm-video-module-tx-sm","title":"American Fibertek MT-220C-SL 2-Channel FM Video Module TX SM","description":"2-Channel FM Video Module TX SM.\n\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195770118379,"sku":"721276","price":1272.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/AMF-MT220CSL.jpg?v=1786479713"},{"product_id":"american-fibertek-mt-81-8-channel-contact-closure-module-tx-w-power-fail-safe-mm","title":"American Fibertek MT-81 8-Channel Contact Closure Module TX w\/Power Fail Safe MM","description":"8-Ch Contact Closure Module TX w\/Power Fail Safe, MM.\n\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195770151147,"sku":"743101","price":1265.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/AMF-MT81.jpg?v=1786479713"},{"product_id":"american-fibertek-mt89d-intercom-system-for-dukane-module-transmitter","title":"American Fibertek MT89D | Intercom System for Dukane Module Transmitter","description":"\u003cp\u003eIntercom System for Dukane Starcall Module Transmitter 850\/1300nm 12dB MM - 1 Fiber.\u003c\/p\u003e\u003cp\u003eThe American Fibertek 89D Series transmits one channel of high-quality low distortion bi-directional audio\/contact closure on one multimode optical fiber. Designed to be completely transparent, the system field microphone and audio levels can be adjusted to balance and optimize signal levels. Diagnostic indicators provide a quick visual indication of system status.\u003c\/p\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195770380523,"sku":"743072","price":878.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/American-Fibertek-MT89D-Transmitter-Main.jpg?v=1786479715"},{"product_id":"american-fibertek-mtm-1400-video-rs422-module-tx-mm","title":"American Fibertek MTM-1400 Video\/RS422 Module TX MM","description":"American Fibertek MTM-1400 Video\/RS422 Module TX MM.\n\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195770413291,"sku":"258409","price":811.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/AMF-MTM1400.jpg?v=1786479715"},{"product_id":"american-fibertek-mtm1605p-video-panasonic-proteus-module-transmitter","title":"American Fibertek MTM1605P Video\/Panasonic Proteus Module Transmitter","description":"Video\/Panasonic Proteus Module Transmitter.\n\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195770446059,"sku":"339168","price":1627.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/American_Fibertek_MTM1605P.jpg?v=1786479715"},{"product_id":"american-fibertek-mtx46fxsc-module-tx-single-fiber-10-100-ethernet","title":"American Fibertek MTX46FXSC Module Tx Single Fiber 10\/100 Ethernet","description":"Module Tx Single Fiber 10\/100 Ethernet.\n\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195770642667,"sku":"742896","price":665.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/American_Fibertek_MTX46FXSC.jpg?v=1786479715"},{"product_id":"american-fibertek-mtx-46-fx-st-10-100-ethernet-module-tx-1-fiber-st-connector-mm","title":"American Fibertek MTX-46-FX-ST 10\/100 Ethernet Module TX, 1 Fiber, ST Connector, MM","description":"Single Fiber 10\/100 Ethernet) Module Rx.\n\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195770740971,"sku":"742897","price":665.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/American_Fibertek_MTX-46-FX-ST.jpg?v=1786479716"},{"product_id":"american-fibertek-mtx-487-2-channel-rs485-2-4-wire-or-rs422-module-tx-m","title":"American Fibertek MTX-487 2-Channel RS485 2\/4 Wire or RS422 Module TX M","description":"2-Channel RS485 2\/4 Wire or RS422 Module TX M.\n\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195770937579,"sku":"743032","price":1017.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/AMF-MTX487.jpg?v=1786479717"},{"product_id":"american-fibertek-mtx8885c-8channel-video-data","title":"American Fibertek MTX8885C 8Channel Video \u0026 Data","description":"8Channel Video \u0026amp; Data.\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195771330795,"sku":"258396","price":4010.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/AMF-MTX8885C.jpg?v=1786479720"},{"product_id":"american-fibertek-mx-46-fx-st-10-100-ethernet-module-tcvr-2-fiber-st-connector-mm","title":"American Fibertek MX-46-FX-ST 10\/100 Ethernet Module TCVR 2 Fiber ST Connector MM","description":"10\/100 Ethernet Module TCVR 2 Fiber ST Connector MM.\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195772149995,"sku":"742924","price":579.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/AMF-MX46FXST.jpg?v=1786479724"},{"product_id":"american-fibertek-mx-480-rs485-422-232-manchester-module-tcvr-2-fiber-mm","title":"American Fibertek MX-480 RS485\/422\/232\/Manchester Module TCVR 2 Fiber MM","description":"The American Fibertek 480 Series transmits one channel of multi-protocol bi-directional data on one or two multimode optical fibers. The American Fibertek 480SL Series transmits one channel of multi-protocol bi-directional data on one singlemode optical fiber. The system is comprised of two transceivers forming a point-to-point communications link. Available switch selectable data formats include: RS485 (2 or 4 wire), RS422, RS232, and Manchester\/Bosch. The system requires no field adjustments at installation or additional maintenance thereafter. Diagnostic indicators provide a quick visual indication of system status. The “Afinety” intelligent remote monitoring system is available on this product, please consult factory.\n\n\u003cbr\u003e\u003cbr\u003e\n\nFeatures\n\n\u003cli\u003e    Switch Selectable Multi-Protocol Data Channel\n\u003c\/li\u003e\u003cli\u003e    Diagnostic Indicators: DC Power, Data Activity, and Optical Presence\n\u003c\/li\u003e\u003cli\u003e    Switch Selectable Terminations\n\u003c\/li\u003e\u003cli\u003e    DC to 115 Kb\/s\n\u003c\/li\u003e\u003cli\u003e    Two Fiber Configurations\n\u003c\/li\u003e\u003cli\u003e    Available with Enhanced “Afinety” Intelligent Monitoring System\n\u003c\/li\u003e\u003cli\u003e    Module Transceiver\n\u003cbr\u003e\u003cbr\u003e\t\n\n\nSpecs\n\n\u003c\/li\u003e\u003cli\u003eManufacturer \t                          American Fibertek Inc.\n\u003c\/li\u003e\u003cli\u003eCondition \t                               New\n\u003c\/li\u003e\u003cli\u003e    Choice of: RS485 (2 or 4 Wire), RS422, RS232, or Manchester\/Bosch\n\u003c\/li\u003e\u003cli\u003e    Format : Asynchronous\n\u003c\/li\u003e\u003cli\u003e    Data Rate : DC to 115Kbit\/s\n\u003c\/li\u003e\u003cli\u003e    Connector : Terminal Block\n\u003c\/li\u003e\u003cli\u003e    Wavelength:\n\u003c\/li\u003e\u003cli\u003e        Dual Fiber  : 1310 nm\n\u003c\/li\u003e\u003cli\u003e    Loss Budget:\n\u003c\/li\u003e\u003cli\u003e        480 Series (62.5\/125?) : .18 dB\n\u003c\/li\u003e\u003cli\u003e    Connector : SC\n\u003c\/li\u003e\u003cli\u003eTemperature (Operating):     -40°C to +75°C, non-condensing\n\u003c\/li\u003e\u003cli\u003ePower Supply:\n\u003c\/li\u003e\u003cli\u003e    Module 12 VDC(AFI Part : PS-12)\n\u003c\/li\u003e\u003cli\u003e   Power Consumption : 5 Watts\n\u003c\/li\u003e\u003cli\u003eSize:     Module 41?4” x 41?4” x 11?8”\u003c\/li\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195772182763,"sku":"743075","price":1110.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/AMF-MX480.jpg?v=1786479725"},{"product_id":"american-fibertek-mx4852t-s-rs485-2-wire-or-rs422-repeater-module-transceiver","title":"American Fibertek MX4852T | S RS485 (2 Wire) or RS422 Repeater Module Transceiver","description":"RS485 (2 Wire) or RS422 Repeater Module Transceiver.\n\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195772346603,"sku":"743036","price":775.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/American-Fibertek-500x500_d7d03266-b354-4f67-b7c2-609bbe71dbf8.jpg?v=1786479726"},{"product_id":"american-fibertek-ps-12-12-volt-dc-plug-in-power-supply","title":"American Fibertek PS-12 12 Volt DC Plug in Power Supply","description":"American Fibertek PS-12 12 Volt DC Plug in Power Supply.\n\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195772969195,"sku":"743104","price":18.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/AMF-PS12.jpg?v=1786479728"},{"product_id":"american-fibertek-rrm-1400-video-rs422-rack-card-rx-mm","title":"American Fibertek RRM-1400 Video\/RS422 Rack Card RX MM","description":"Video\/RS422 Rack Card RX MM.\n\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195773001963,"sku":"258423","price":811.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/AMF-RRM1400.jpg?v=1786479728"},{"product_id":"american-fibertek-rrm-1605p-video-panasonic-proteus-rack-card-rx-mm","title":"American Fibertek RRM-1605P Video\/Panasonic Proteus Rack Card RX MM","description":"The American Fibertek M1605P Series transmits high-quality, simultaneous video with reverse Panasonic Control Protocol on one multimode optical fiber. Designed to be used with Panasonic products, these systems require no field adjustments at installation or additional maintenance thereafter. Diagnostic indicators provide a quick visual indication of system status. Equipment may be ordered as stand alone modules or rack cards that are mounted in the American Fibertek Card Cages: SR-20D\/2 or SR-20R\/1. Panasonic products provide full function Bi-directional video, camera and PTZ control along with full contact closure and video genlock. \u003cbr\u003e\u003cbr\u003e\r\n\r\nFeatures\r\n\r\n\u003cli\u003eVideo with Reverse Panasonic Camera and PTZ Control Over One Multimode Optical Fiber\r\n\u003c\/li\u003e\u003cli\u003eCompatible with NTSC; RS-170A \u0026amp; RS-343A and PAL\r\n\u003c\/li\u003e\u003cli\u003eDiagnostics: Video, Power and Optical Presence\r\n\u003c\/li\u003e\u003cli\u003eFull Color Transmission\r\n\u003c\/li\u003e\u003cli\u003ePFM Video Transmission\r\n\u003c\/li\u003e\u003cli\u003eRack Card Receiver - Control Site\r\n\u003cbr\u003e\u003cbr\u003e\r\n\r\nSpecs\r\n\r\n\u003c\/li\u003e\u003cli\u003eManufacturer\tAmerican Fibertek Inc.\r\n\u003c\/li\u003e\u003cli\u003eCondition\tNew\r\n\u003c\/li\u003e\u003cli\u003eI\/0 Level : 1 Vpp\r\n\u003c\/li\u003e\u003cli\u003eI\/0 Impedance : 75 Ohms\r\n\u003c\/li\u003e\u003cli\u003eBandwidth : 8 MHz\r\n\u003c\/li\u003e\u003cli\u003eDifferential Gain : 5 %\r\n\u003c\/li\u003e\u003cli\u003eDifferential Phase : 3°\r\n\u003c\/li\u003e\u003cli\u003eSNR : 60 dB\r\n\u003c\/li\u003e\u003cli\u003eConnector : BNC\r\n\u003c\/li\u003e\u003cli\u003eSystem Data Supports:    Full function Panasonic Proteus control protocol.\r\n\u003c\/li\u003e\u003cli\u003eWavelength : 850\/1300 nm\r\n\u003c\/li\u003e\u003cli\u003eLoss Budget (62.5\/125?) : 12 dB\r\n\u003c\/li\u003e\u003cli\u003eMaximum Transmission Distance : 1.6 Km\r\n\u003c\/li\u003e\u003cli\u003eConnector : ST\r\n\u003c\/li\u003e\u003cli\u003eTemperature (Operating):    -40°C to +74°C, non-condensing\r\n\u003c\/li\u003e\u003cli\u003eSize:  Rack Card : 6 1\/2\" x 1\" x 5\"\u003c\/li\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195773264107,"sku":"339170","price":1627.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/AMF-RRM1605P.jpg?v=1786479729"},{"product_id":"american-fibertek-rrx-46-fx-st-10-100-ethernet-rack-card-rx-1-fiber-st-connector-mm","title":"American Fibertek RRX-46-FX-ST 10\/100 Ethernet Rack Card RX, 1 Fiber, ST Connector, MM","description":"Ethernet Rack Card RX, 1 Fiber, ST Connector, MM.\n\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195773296875,"sku":"742910","price":665.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/American_Fibertek_RRX-46-FX-ST.jpg?v=1786479729"},{"product_id":"american-fibertek-rx-48-lx-st-10-100-1000-ethernet-rack-card-tcvr-2-fiber-st-1300nm-mm","title":"American Fibertek RX-48-LX-ST 10\/100\/1000 Ethernet Rack Card TCVR 2 Fiber ST 1300nm MM","description":"10\/100\/1000 Ethernet Rack Card TCVR 2 Fiber ST 1300nm MM.\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195773526251,"sku":"742912","price":760.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/AMF-RRX48LXST.jpg?v=1786479729"},{"product_id":"american-fibertek-rt-220c-sl-2-channel-fm-video-rack-card-tx-sm","title":"American Fibertek RT-220C-SL 2-Channel FM Video Rack Card TX SM","description":"2-Channel FM Video Rack Card TX SM.\n\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195773559019,"sku":"939623","price":1023.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/AMF-RT220CSL.jpg?v=1786479730"},{"product_id":"american-fibertek-rtm1605p-video-panasonic-proteus-rack-card-transmitter","title":"American Fibertek RTM1605P Video\/Panasonic Proteus Rack Card Transmitter","description":"Video\/Panasonic Proteus Rack Card Transmitter.\n\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195773690091,"sku":"339169","price":1627.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/American_Fibertek_RTM1605P.jpg?v=1786479731"},{"product_id":"american-fibertek-rtx-48-lx-st-10-100-1000-ethernet-rack-card-tx-1-fiber-st-mm","title":"American Fibertek RTX-48-LX-ST 10\/100\/1000 Ethernet Rack Card TX 1 Fiber ST MM","description":"10\/100\/1000 Ethernet Rack Card TX 1 Fiber ST MM.\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195773755627,"sku":"742916","price":760.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/AMF-RTX48LXST.jpg?v=1786479731"},{"product_id":"american-fibertek-rx-46-fx-st-10-100-ethernet-rack-card-tcvr-2-fiber-st-connector-mm","title":"American Fibertek RX-46-FX-ST 10\/100 Ethernet Rack Card TCVR 2 Fiber ST Connector MM","description":"10\/100 Ethernet Rack Card TCVR 2 Fiber ST Connector MM.\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195773788395,"sku":"742934","price":579.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/AMF-RX46FXST.jpg?v=1786479731"},{"product_id":"comnet-cnfe4fx4us-unmanaged-switch-4-port-100mbps-4-fiber","title":"Comnet CNFE4FX4US Unmanaged Switch, 4 Port, 100Mbps, 4 Fiber","description":"The ComNet™ CNFE4US Ethernet 4 port unmanaged switch Series is designed to transmit and receive 10\/100 Mbps data over optical fiber through user selectable SFP options or 10\/100 Mbps data over CAT5E\/6 electrical cable. This unit integrates 4 independent 10\/100 Mbps channels in a single package. The CNFE4FX2TX2US and CNFE4FX4US require the ordering of sold-separately interchangeable SFP modules for fiber type, distance and connectors. The CNFE4FX2TX2US and CNFE4TX4US electrical interfaces will Auto-Negotiate to 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interfaces operate at a 100 Mbps Ethernet rate. All models are environmentally hardened to operate in demanding environments. LED indicators are provided for confirming equipment operating status. These units are interchangeable between stand-alone or card mount configurations.\n\u003cbr\u003e\u003cbr\u003e\n\nFeatures\n\n\u003cli\u003e    10\/100\/1000 Mbps Ethernet\n\u003c\/li\u003e\u003cli\u003eAll ports support 1000 Mbps full duplex data\n\u003c\/li\u003e\u003cli\u003eAutomatic MDI\/MDI-X crossover\n\u003c\/li\u003e\u003cli\u003eDesigned to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line\/low-line voltage conditions and transient voltage protection) of \u003c\/li\u003e\u003cli\u003eNEMA TS-1\/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.\n\u003c\/li\u003e\u003cli\u003eNo In-field optical adjustments required\n\u003c\/li\u003e\u003cli\u003eVoltage transient protection on all power and signal input\/output lines provides unconditional protection from power surges and other voltage transient events.\n\u003c\/li\u003e\u003cli\u003ePower and Port status LED indicators\n\u003c\/li\u003e\u003cli\u003eIEEE 802.3 compliant\n\u003c\/li\u003e\u003cli\u003eHot-swappable rack modules\n\u003c\/li\u003e\u003cli\u003eInterchangeable between stand-alone or rack mount use ComFit\n\n\u003cbr\u003e\u003cbr\u003e\n\nSpecs\n\n\u003c\/li\u003e\u003cli\u003eManufacturer    Comnet Communication Networks\n\u003c\/li\u003e\u003cli\u003eCondition    New\n\u003c\/li\u003e\u003cli\u003eData Interface    Ethernet\n\u003c\/li\u003e\u003cli\u003eSurface Mount   9-24 VDC @ 700 mA\n\u003c\/li\u003e\u003cli\u003eRack Mount   From Rack\n\u003c\/li\u003e\u003cli\u003ePower    Terminal Block\n\u003c\/li\u003e\u003cli\u003eOptical   LC or SC (depending on SFP module used)\n\u003c\/li\u003e\u003cli\u003eSurface Mount   9-24 VDC @ 700 mA\n\u003c\/li\u003e\u003cli\u003eCircuit Board   Meets IPC Standard\n\u003c\/li\u003e\u003cli\u003eMTBF    \u0026gt;100,000 hours\n\u003c\/li\u003e\u003cli\u003eOperating Temp   -40? C to +75? C\n\u003c\/li\u003e\u003cli\u003eStorage Temp   -40? C to +85? C\n\u003c\/li\u003e\u003cli\u003eRelative Humidity   0% to 95% (non-condensing)†\u003c\/li\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195777032427,"sku":"598532","price":430.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/CON-CNFE4FX4US.jpg?v=1786479748"},{"product_id":"comnet-cnfe8fx4tx4us-unmanaged-switch-8-port-100mbps-4-fiber-4-copper","title":"Comnet CNFE8FX4TX4US Unmanaged Switch, 8 Port,100Mbps, 4 Fiber, 4 Copper","description":"The ComNet™ CNFE8US Series Ethernet 8 port unmanaged switch is designed to transmit and receive 10\/100 Mbps data over optical fiber through user selectable SFP options or 10\/100 Mbps data over CAT5E\/6 electrical cable. This unit integrates eight independent 10\/100 Mbps channels in a single package. The CNFE8FX4TX4US and CNFE8FX8US require the ordering of sold-separately interchangeable SFP modules for fiber type, distance and connectors. All electrical interfaces will Auto-Negotiate to 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interfaces operate at a 100 Mbps Ethernet rate. The CNFE8US Series models are environmentally hardened to operate in demanding environments. LED indicators are provided for confirming equipment operating status. These units are interchangeable between stand-alone or card mount configurations.\n\u003cbr\u003e\u003cbr\u003e\n\nFeatures\n\n\u003cli\u003e    10\/100 Mbps Ethernet\n\u003c\/li\u003e\u003cli\u003e        10\/100 BASE-T\/TX electrical port\n\u003c\/li\u003e\u003cli\u003e        100 BASE-FX optical port\n\u003c\/li\u003e\u003cli\u003e    8 Port 10\/100 Mbps Ethernet Unmanaged Switch; 4 TX, 4 FX\n\u003c\/li\u003e\u003cli\u003e    Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data.\n\u003c\/li\u003e\u003cli\u003e    Optical port supports 100 Mbps full duplex data\n\u003c\/li\u003e\u003cli\u003e   Automatic MDI\/MDI-X crossover\n\u003c\/li\u003e\u003cli\u003e    Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line\/low-line voltage conditions and transient voltage protection) of NEMA TS-1\/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.\n\u003c\/li\u003e\u003cli\u003e    Uses interchangeable SFP for fiber type, distance and connector (Ordered separately)\n\u003c\/li\u003e\u003cli\u003e    Voltage transient protection on all power and signal input\/output lines provides unconditional protection from power surges and other voltage transient events.\n\u003c\/li\u003e\u003cli\u003e    No in-field optical adjustments required\n\u003c\/li\u003e\u003cli\u003e    Power, Activity and Port status LED indicators\n\u003c\/li\u003e\u003cli\u003e    Hot-swappable rack modules\n\u003c\/li\u003e\u003cli\u003e    Interchangeable between stand-alone or rack mount use – ComFit\n\u003c\/li\u003e\u003cli\u003e    IEEE 802.3 compliant\n\n\u003cbr\u003e\u003cbr\u003e\n\n\n\nSpecs\n\n\u003c\/li\u003e\u003cli\u003eManufacturer \t\t\tComnet Communication Networks\n\u003c\/li\u003e\u003cli\u003eCondition \t\t\tNew\n\u003c\/li\u003e\u003cli\u003e    Data Interface: Ethernet\n\u003c\/li\u003e\u003cli\u003e    Data Rate:\n\u003c\/li\u003e\u003cli\u003e        10\/100 Mbps\n\u003c\/li\u003e\u003cli\u003e        IEEE 802.3 Compliant\n\u003c\/li\u003e\u003cli\u003e       Full Duplex or Half Duplex Electrical\n\u003c\/li\u003e\u003cli\u003e        Ports\/Full Duplex Optical Port\n\u003c\/li\u003e\u003cli\u003eFibers*\n\nSFP Dependent\n\n\n\u003c\/li\u003e\u003cli\u003eCable\n\nCAT5E\/6\n\n\n\u003c\/li\u003e\u003cli\u003eFiber Connectors\n\nRequires selection of sold-separately SFP modules. See ComNet data sheet for number and description of SFP modules\n\u003c\/li\u003e\u003cli\u003e    Power: Terminal Block\n\u003c\/li\u003e\u003cli\u003e    Data: RJ45\n\u003c\/li\u003e\u003cli\u003eLed Indicators\n\n\u003c\/li\u003e\u003cli\u003e    Optical Link\/Data Activity\n\u003c\/li\u003e\u003cli\u003e    Electrical Link\/Data Activity\n\u003c\/li\u003e\u003cli\u003e    Power\n\u003c\/li\u003e\u003cli\u003e    Surface Mount: 9-24 VDC @ 700 mA\n\u003c\/li\u003e\u003cli\u003e    Rack Mount: From Rack\n\n\u003c\/li\u003e\u003cli\u003eNumber of Rack Slots: 2\n\u003c\/li\u003e\u003cli\u003eCurrent Protection:\n\n\u003c\/li\u003e\u003cli\u003e   Automatic Resettable\n\u003c\/li\u003e\u003cli\u003e   Solid-State Current Limiters\n\n\u003c\/li\u003e\u003cli\u003eCircuit Board: Meets IPC Standard\n\u003c\/li\u003e\u003cli\u003eSize (in.\/cm) (L×W×H) : 6.1 × 5.3 × 2.2 in., (15.5 × 13.5 × 5.6 cm)\n\u003c\/li\u003e\u003cli\u003e    MTBF: \u0026gt;100,000 hours\n\u003c\/li\u003e\u003cli\u003e    Operating Temp: -40? C to +75? C\n\u003c\/li\u003e\u003cli\u003e    Storage Temp: -40? C to +85? C\n\u003c\/li\u003e\u003cli\u003e    Relative Humidity: 0% to 95% (non-condensing)\u003c\/li\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195777851627,"sku":"598530","price":646.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/CON-CNFE8FX4TX4US.jpg?v=1786479753"},{"product_id":"comnet-fdx55s1ae-comnet-rs232-fo-trans-singlemode-a-side","title":"Comnet FDX55S1AE Comnet Rs232 Fo Trans Singlemode A Side","description":"The ComNet™ FDX55 series consists of fully-digital transceiver units designed for implementing simplex or full-duplex RS232 Drop-and-Repeat poll-and-respond traffic signalization\/communications data networks utilizing one or two optical fibers. These environmentally-hardened units are ideal for use in unconditioned out-of-plant or roadside installations and the master-configured transceiver unit may be located anywhere within the network, making this equipment ideal for applications involving on-street master controllers with upstream and downstream communication requirements. These units are compatible with FDX50, FDX51 and FDX52 Series of optical modems. Manually resettable anti-streaming is included for unparalleled network protection. Optional battery backup capability provides the highest level of network reliability in the event of a loss of local prime operating power, and maintains continuous communications channel operation. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red\/Green) LED indicators are provided for rapidly ascertaining equipment operating status. These units are interchangeable between stand-alone or card mount configurations.\u003cbr\u003e\u003cbr\u003e\n\nFeatures\n\n\u003cli\u003e1 Fibers Single Mode 9\/125?m\n\u003c\/li\u003e\u003cli\u003eMeets EIA RS232C\/D specifications (Simplex or Duplex)\n\u003c\/li\u003e\u003cli\u003eNTCIP compatible\n\u003c\/li\u003e\u003cli\u003eTested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line\/low-line voltage conditions and transient voltage protection) of NEMA TS-1\/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.\n\u003c\/li\u003e\u003cli\u003eRobust design assures extremely high reliability in unconditioned roadside environments\n\u003c\/li\u003e\u003cli\u003eUser-selectable DTE or DCE interface ensures ease of installation and maximum versatility\n\u003c\/li\u003e\u003cli\u003eSupports Request to Send (RTS) and Clear to Send (CTS) signals\n\u003c\/li\u003e\u003cli\u003eRJ-11 expansion port provides network branching capability by electrically linking co-located transceiver units\n\u003c\/li\u003e\u003cli\u003eVoltage transient protection on all power and signal input\/output lines provides unconditional protection from power surges and other voltage transient events.\n\u003c\/li\u003e\u003cli\u003eOptional internal battery backup provides 12 hours operating time in the event of loss of 115 VAC prime operating power, and maintains continuous channel communications.\n\u003c\/li\u003e\u003cli\u003eWide optical dynamic range: optical attenuators are never required\n\u003c\/li\u003e\u003cli\u003eUser-configurable optical and electrical Anti-Streaming provides network protection against faulty streaming controller operation\n\u003c\/li\u003e\u003cli\u003eHot-swappable rack modules\n\u003c\/li\u003e\u003cli\u003eInterchangeable between stand-alone or rack mount use ComFit\n\u003cbr\u003e\u003cbr\u003e\n\nSpecs\n\n\u003c\/li\u003e\u003cli\u003eManufacturer\tComnet Communication Networks\n\u003c\/li\u003e\u003cli\u003eCondition\t\tNew\n\u003c\/li\u003e\u003cli\u003eData Format: RS232, RS422\n\u003c\/li\u003e\u003cli\u003eData Rate: DC-115 kbps\n\u003c\/li\u003e\u003cli\u003eOperating Mode: Asynchronous, simplex or full duplex\n\u003c\/li\u003e\u003cli\u003eBit Error Rate: \u0026lt;1 in 10-9 @ Max. Optical Loss Budget\n\u003c\/li\u003e\u003cli\u003eAnti-Streaming Time-out: 4, 8, 16, 64 Seconds or Infinity (disabled)\n\u003c\/li\u003e\u003cli\u003eSurface Mount: 9-30 VDC @ 2.5 W\n\u003c\/li\u003e\u003cli\u003eRack: From Rack\n\u003c\/li\u003e\u003cli\u003eNumber of Rack Slots: 2\n\u003c\/li\u003e\u003cli\u003eCurrent Protection:\n\u003c\/li\u003e\u003cli\u003eAutomatic Resettable\n\u003c\/li\u003e\u003cli\u003eSolid-State Current Limiters\n\u003c\/li\u003e\u003cli\u003eCircuit Board: Meets IPC Standard\n\u003c\/li\u003e\u003cli\u003eSize (in.\/cm) (L×W×H) 6.1 × 5.3 × 2.2 in. (15.5 × 13.2 × 5.6 cm)\u003c\/li\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195779358955,"sku":"598462","price":3246.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/CON-FDX55S1AE.jpg?v=1786479762"},{"product_id":"comnet-fdx55s1be-comnet-rs232-fo-trans-singlemode-b-side","title":"Comnet FDX55S1BE Comnet RS232 Fo Trans Singlemode B Side","description":"The ComNet™ FDX55 series consists of fully-digital transceiver units designed for implementing simplex or full-duplex RS232 Drop-and-Repeat poll-and-respond traffic signalization\/communications data networks utilizing one or two optical fibers. These environmentally-hardened units are ideal for use in unconditioned out-of-plant or roadside installations and the master-configured transceiver unit may be located anywhere within the network, making this equipment ideal for applications involving on-street master controllers with upstream and downstream communication requirements. These units are compatible with FDX50, FDX51 and FDX52 Series of optical modems. Manually resettable anti-streaming is included for unparalleled network protection. Optional battery backup capability provides the highest level of network reliability in the event of a loss of local prime operating power, and maintains continuous communications channel operation. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red\/Green) LED indicators are provided for rapidly ascertaining equipment operating status. These units are interchangeable between stand-alone or card mount configurations.\u003cbr\u003e\u003cbr\u003e\n\nFeatures\n\n\u003cli\u003e1 Fibers Single Mode 9\/125?m\n\u003c\/li\u003e\u003cli\u003eMeets EIA RS232C\/D specifications (Simplex or Duplex)\n\u003c\/li\u003e\u003cli\u003eNTCIP compatible\n\u003c\/li\u003e\u003cli\u003eTested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line\/low-line voltage conditions and transient voltage protection) of NEMA TS-1\/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.\n\u003c\/li\u003e\u003cli\u003eRobust design assures extremely high reliability in unconditioned roadside environments\n\u003c\/li\u003e\u003cli\u003eUser-selectable DTE or DCE interface ensures ease of installation and maximum versatility\n\u003c\/li\u003e\u003cli\u003eSupports Request to Send (RTS) and Clear to Send (CTS) signals\n\u003c\/li\u003e\u003cli\u003eRJ-11 expansion port provides network branching capability by electrically linking co-located transceiver units\n\u003c\/li\u003e\u003cli\u003eVoltage transient protection on all power and signal input\/output lines provides unconditional protection from power surges and other voltage transient events.\n\u003c\/li\u003e\u003cli\u003eOptional internal battery backup provides 12 hours operating time in the event of loss of 115 VAC prime operating power, and maintains continuous channel communications.\n\u003c\/li\u003e\u003cli\u003eWide optical dynamic range: optical attenuators are never required\n\u003c\/li\u003e\u003cli\u003eUser-configurable optical and electrical Anti-Streaming provides network protection against faulty streaming controller operation\n\u003c\/li\u003e\u003cli\u003eHot-swappable rack modules\n\u003c\/li\u003e\u003cli\u003eInterchangeable between stand-alone or rack mount use ComFit\n\u003cbr\u003e\u003cbr\u003e\n\nSpecs\n\n\u003c\/li\u003e\u003cli\u003eManufacturer\tComnet Communication Networks\n\u003c\/li\u003e\u003cli\u003eCondition\t\tNew\n\u003c\/li\u003e\u003cli\u003eData Format: RS232, RS422\n\u003c\/li\u003e\u003cli\u003eData Rate: DC-115 kbps\n\u003c\/li\u003e\u003cli\u003eOperating Mode: Asynchronous, simplex or full duplex\n\u003c\/li\u003e\u003cli\u003eBit Error Rate: \u0026lt;1 in 10-9 @ Max. Optical Loss Budget\n\u003c\/li\u003e\u003cli\u003eAnti-Streaming Time-out: 4, 8, 16, 64 Seconds or Infinity (disabled)\n\u003c\/li\u003e\u003cli\u003eSurface Mount: 9-30 VDC @ 2.5 W\n\u003c\/li\u003e\u003cli\u003eRack: From Rack\n\u003c\/li\u003e\u003cli\u003eNumber of Rack Slots: 2\n\u003c\/li\u003e\u003cli\u003eCurrent Protection:\n\u003c\/li\u003e\u003cli\u003eAutomatic Resettable\n\u003c\/li\u003e\u003cli\u003eSolid-State Current Limiters\n\u003c\/li\u003e\u003cli\u003eCircuit Board: Meets IPC Standard\n\u003c\/li\u003e\u003cli\u003eSize (in.\/cm) (L×W×H) 6.1 × 5.3 × 2.2 in. (15.5 × 13.2 × 5.6 cm)\u003c\/li\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195779391723,"sku":"598463","price":3246.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/CON-FDX55S1BE.jpg?v=1786479762"},{"product_id":"comnet-fvr1021m1-digitally-encoded-video-receiver-data-transmitter-10-bit-multimode","title":"Comnet FVR1021M1 Digitally Encoded Video Receiver\/Data Transmitter, 10-Bit, Multimode","description":"The ComNet™ FVT\/FVR1021 series video transmitter\/ receiver and data transmitter\/receiver supports the simultaneous transmission of short-haul quality 10-bit Digitally Encoded video and return data over one multimode or single mode optical fiber. This module is universally compatible with major CCTV camera manufacturers and supports RS-232 and RS-422 data interfaces. The FVT\/FVR1021 allows the user to set the data through a switch on the unit. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red\/Green) LED indicators are provided for rapidly ascertaining equipment operating status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.\n\u003cbr\u003e\u003cbr\u003e\n\nFeatures\n\n\u003cli\u003e10-bit Digital Video Transmission\n\u003c\/li\u003e\u003cli\u003eVideo Receiver\/Data Transceiver (1550\/1310 nm)\n\u003c\/li\u003e\u003cli\u003eCompatible with all NTSC, PAL, or SECAM CCTV camera systems\n\u003c\/li\u003e\u003cli\u003eFull Color Compatibility\n\u003c\/li\u003e\u003cli\u003eExceeds RS-250C Short-Haul quality\n\u003c\/li\u003e\u003cli\u003eSupports RS-232 and RS-422 data interfaces\n\u003c\/li\u003e\u003cli\u003eSupports Manchester and bi-phase data\n\u003c\/li\u003e\u003cli\u003eNo In-field electrical or optical adjustments\n\u003c\/li\u003e\u003cli\u003eBi-color (Red\/Green) LED status indicators provide rapid indication of critical operating parameters\n\u003c\/li\u003e\u003cli\u003eIntegrated WDM for greater product reliability\n\u003c\/li\u003e\u003cli\u003eVoltage transient protection on all power and signal input\/output lines provides unconditional protection from power surges and other voltage transient events.\n\u003c\/li\u003e\u003cli\u003eDistances 3 km (2 ml) without repeaters\n\u003c\/li\u003e\u003cli\u003eTested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line\/low-line voltage conditions and transient voltage protection) of NEMA TS-1\/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.\n\u003c\/li\u003e\u003cli\u003eHot-swappable rack modules\n\u003c\/li\u003e\u003cli\u003eInterchangeable between stand-alone or rack mount use – ComFit\n\u003c\/li\u003e\u003cli\u003eAutomatic resettable fuses on all power lines\n\u003cbr\u003e\u003cbr\u003e\n\nSpecs\n\n\u003c\/li\u003e\u003cli\u003eManufacturer  Comnet Communication Networks\n\u003c\/li\u003e\u003cli\u003eCategory  New\n\u003c\/li\u003e\u003cli\u003eVideo Input: 1 volt pk-pk (75 ohms)\n\u003c\/li\u003e\u003cli\u003eOverload: \u0026gt;1.5V pk-pk\n\u003c\/li\u003e\u003cli\u003eBandwidth: 5 Hz - 6.5 MHz\n\u003c\/li\u003e\u003cli\u003eDifferential Gain: \u0026lt;2%\n\u003c\/li\u003e\u003cli\u003eDifferential Phase: \u0026lt;0.7°\n\u003c\/li\u003e\u003cli\u003eTilt: \u0026lt;1%\n\u003c\/li\u003e\u003cli\u003eSignal-to-Noise Ratio (SNR): \u0026gt;67 dB @ Maximum Optical Loss Budget\n\u003c\/li\u003e\u003cli\u003eMax. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth\n\u003c\/li\u003e\u003cli\u003eOperating Temp: -40° C to +75° C\n\u003c\/li\u003e\u003cli\u003eStorage Temp: -40° C to +85° C\n\u003c\/li\u003e\u003cli\u003eRelative Humidity: 0% to 95% (non-condensing)\u003c\/li\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195780735211,"sku":"437579","price":865.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/CON-FVR1021M1.jpg?v=1786479769"},{"product_id":"comnet-fvr1021s1-digitally-encoded-video-receiver-data-transmitter-10-bit-single-mode","title":"Comnet FVR1021S1 Digitally Encoded Video Receiver\/Data Transmitter, 10-Bit, Single Mode","description":"The ComNet™ FVT\/FVR1021 series video transmitter\/ receiver and data transmitter\/receiver supports the simultaneous transmission of short-haul quality 10-bit Digitally Encoded video and return data over one multimode or single mode optical fiber. This module is universally compatible with major CCTV camera manufacturers and supports RS-232 and RS-422 data interfaces. The FVT\/FVR1021 allows the user to set the data through a switch on the unit. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red\/Green) LED indicators are provided for rapidly ascertaining equipment operating status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.\n\u003cbr\u003e\u003cbr\u003e\n\nFeatures\n\n\u003cli\u003e10-bit Digital Video Transmission\n\u003c\/li\u003e\u003cli\u003eVideo Receiver\/Data Transceiver (1550\/1310 nm)\n\u003c\/li\u003e\u003cli\u003eCompatible with all NTSC, PAL, or SECAM CCTV camera systems\n\u003c\/li\u003e\u003cli\u003eFull Color Compatibility\n\u003c\/li\u003e\u003cli\u003eExceeds RS-250C Short-Haul quality\n\u003c\/li\u003e\u003cli\u003eSupports RS-232 and RS-422 data interfaces\n\u003c\/li\u003e\u003cli\u003eSupports Manchester and bi-phase data\n\u003c\/li\u003e\u003cli\u003eNo In-field electrical or optical adjustments\n\u003c\/li\u003e\u003cli\u003eBi-color (Red\/Green) LED status indicators provide rapid indication of critical operating parameters\n\u003c\/li\u003e\u003cli\u003eIntegrated WDM for greater product reliability\n\u003c\/li\u003e\u003cli\u003eVoltage transient protection on all power and signal input\/output lines provides unconditional protection from power surges and other voltage transient events.\n\u003c\/li\u003e\u003cli\u003eDistances 3 km (2 ml) without repeaters\n\u003c\/li\u003e\u003cli\u003eTested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line\/low-line voltage conditions and transient voltage protection) of NEMA TS-1\/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.\n\u003c\/li\u003e\u003cli\u003eHot-swappable rack modules\n\u003c\/li\u003e\u003cli\u003eInterchangeable between stand-alone or rack mount use – ComFit\n\u003c\/li\u003e\u003cli\u003eAutomatic resettable fuses on all power lines\n\u003cbr\u003e\u003cbr\u003e\n\nSpecs\n\n\u003c\/li\u003e\u003cli\u003eManufacturer  Comnet Communication Networks\n\u003c\/li\u003e\u003cli\u003eCategory  New\n\u003c\/li\u003e\u003cli\u003eVideo Input: 1 volt pk-pk (75 ohms)\n\u003c\/li\u003e\u003cli\u003eOverload: \u0026gt;1.5V pk-pk\n\u003c\/li\u003e\u003cli\u003eBandwidth: 5 Hz - 6.5 MHz\n\u003c\/li\u003e\u003cli\u003eDifferential Gain: \u0026lt;2%\n\u003c\/li\u003e\u003cli\u003eDifferential Phase: \u0026lt;0.7°\n\u003c\/li\u003e\u003cli\u003eTilt: \u0026lt;1%\n\u003c\/li\u003e\u003cli\u003eSignal-to-Noise Ratio (SNR): \u0026gt;67 dB @ Maximum Optical Loss Budget\n\u003c\/li\u003e\u003cli\u003eMax. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth\n\u003c\/li\u003e\u003cli\u003eOperating Temp: -40° C to +75° C\n\u003c\/li\u003e\u003cli\u003eStorage Temp: -40° C to +85° C\n\u003c\/li\u003e\u003cli\u003eRelative Humidity: 0% to 95% (non-condensing)\u003c\/li\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195781292267,"sku":"598319","price":1152.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/CON-FVR1021S1.jpg?v=1786479773"},{"product_id":"comnet-fvr15m2-video-reverse-data-cost-effective","title":"Comnet FVR15M2 Video + Reverse Data (Cost Effective)","description":"The ComNet™ FVT\/FVR15M2 series video and data\ntransceiver supports the simultaneous transmission\nof video and return data over two multimode optical\nfibers. The module is universally compatible with all\nmajor CCTV camera manufacturers and supports\nRS232 and RS422 data interfaces and all major data\nprotocols. Plug-and-play design ensures ease of\ninstallation and no electrical or optical adjustments are\never required. Bi-color (Red\/Green) LED indicators\nare provided for rapidly ascertaining equipment\noperating status. Packaged in the exclusive ComNet\nComFit housing, these units may be either wall or rackmounted,\nor may be DIN-rail mounted by the addition of\nComNet model DINBKT1 adaptor plate.\n\u003cbr\u003e\u003cbr\u003e\n\nFeatures\n\n\u003cli\u003eAM Video Transmission\n\u003c\/li\u003e\u003cli\u003e NTSC, PAL, or SECAM compatible\n\u003c\/li\u003e\u003cli\u003e Full Color Compatibility\n\u003c\/li\u003e\u003cli\u003eNTCIP Compatible\n\u003c\/li\u003e\u003cli\u003e Supports RS232 or RS422 Data interfaces\n\u003c\/li\u003e\u003cli\u003eTransparent to data encoding\/compatible with major\n\u003c\/li\u003e\u003cli\u003eCCTV camera manufacturers\n\u003c\/li\u003e\u003cli\u003eNo In-field electrical or optical adjustments\n\u003c\/li\u003e\u003cli\u003e Bi-color (Red\/Green) LED status indicators provide rapid\nindication of critical operating parameters\n\u003c\/li\u003e\u003cli\u003eDistances up to 1.5 miles (2.5 km) without repeaters\n\u003c\/li\u003e\u003cli\u003eVoltage transient protection on all power and signal\ninput\/output lines provides unconditional protection from\npower surges and other voltage transient events\n\u003c\/li\u003e\u003cli\u003eTested and certified by an independent laboratory for\nfull compliance with the environmental requirements\n(ambient operating temperature, mechanical shock,\nvibration, humidity with condensation, high-line\/low-line\nvoltage conditions and transient voltage protection) of\n\u003c\/li\u003e\u003cli\u003eNEMA TS-1\/TS-2 and the Caltrans Specification for Traffic\n\u003c\/li\u003e\u003cli\u003eSignal Control Equipment\n\u003c\/li\u003e\u003cli\u003eHot-swappable rack modules\n\u003c\/li\u003e\u003cli\u003eInterchangeable between stand-alone or rack mount use\n\u003c\/li\u003e\u003cli\u003eComFit\n\u003c\/li\u003e\u003cli\u003eAutomatic resettable fuses on all power lines\n\u003cbr\u003e\u003cbr\u003e\n\n\n\nSpecs\n\n\u003c\/li\u003e\u003cli\u003eManufacturer \t\t\tComnet Communication Networks\n\u003c\/li\u003e\u003cli\u003eCondition \t\t\tNew\n\u003c\/li\u003e\u003cli\u003eVideo Input: 1 volt pk-pk (75 ohms)\n\u003c\/li\u003e\u003cli\u003eBandwidth: 5 Hz - 10 MHz\n\u003c\/li\u003e\u003cli\u003eDifferential Gain: \u0026lt;5%\n\u003c\/li\u003e\u003cli\u003eDifferential Phase: \u0026lt;5°\n\u003c\/li\u003e\u003cli\u003eTilt: \u0026lt;1%\n\u003c\/li\u003e\u003cli\u003eSignal-to-Noise Ratio (SNR): \u0026gt;55 dB @ 10 dB ATTN.\n\u003c\/li\u003e\u003cli\u003eMax. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic\n\u003c\/li\u003e\u003cli\u003eModule to maintain 6Mhz Bandwidth\n\u003c\/li\u003e\u003cli\u003eData Format: RS232, RS422, Manchester, biphase\n\u003c\/li\u003e\u003cli\u003eData Rate: DC-115 Kbps (NRZ)\n\u003c\/li\u003e\u003cli\u003eWavelength 850 nm\n\u003c\/li\u003e\u003cli\u003eNumber Of Fibers\n\u003c\/li\u003e\u003cli\u003eFVT\/FVR15M2 2\n\u003c\/li\u003e\u003cli\u003eLed Indicators - Video Present\n\u003c\/li\u003e\u003cli\u003eTransmit Data\n\u003c\/li\u003e\u003cli\u003e Receive Data\n\u003c\/li\u003e\u003cli\u003eOptical: ST\n\u003c\/li\u003e\u003cli\u003ePower: Terminal Block\n\u003c\/li\u003e\u003cli\u003eData: Terminal Block\n\u003c\/li\u003e\u003cli\u003eVideo: BNC (Gold Plated Center-Pin)\n\u003c\/li\u003e\u003cli\u003ePower:\n\u003c\/li\u003e\u003cli\u003eSurface Mount: 8-15 VDC @ 250 mA\n\u003c\/li\u003e\u003cli\u003eRack Mount: From Rack\n\u003c\/li\u003e\u003cli\u003eNumber of Rack Slots: 1\n\u003c\/li\u003e\u003cli\u003eCurrent Protection: Automatic Resettable Solid-State\n\u003c\/li\u003e\u003cli\u003eCurrent Limiters\n\u003c\/li\u003e\u003cli\u003eCircuit Board: Meets IPC Standard\n\u003c\/li\u003e\u003cli\u003eSize (in.\/cm) (L×W×H) 6.1 × 5.3 × 1.1 in.,\n(15.5 × 13.5 × 2.8 cm)\n\u003c\/li\u003e\u003cli\u003eMTBF: \u0026gt;100,000 hours\n\u003c\/li\u003e\u003cli\u003eOperating Temp: -40° C to +75° C\n\u003c\/li\u003e\u003cli\u003eStorage Temp: -40° C to +85° C\n\u003c\/li\u003e\u003cli\u003eHeat Generation: 10 BTU\n\u003c\/li\u003e\u003cli\u003eRelative Humidity: 0% to 95% (non-condensing)\u003c\/li\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195782340843,"sku":"404723","price":450.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/CON-FVR15M2.jpg?v=1786479778"},{"product_id":"comnet-fvr4014m1-4-channel-digitally-encoded-video-receiver-4-channels-bi-directional-data-channels-1-fiber-multimode","title":"Comnet FVR4014M1 4 Channel Digitally Encoded Video Receiver + 4 Channels Bi-directional Data Channels, 1 Fiber, Multimode","description":"The ComNet™ FVT\/FVR4014 video transmitter\/data transceiver and video receiver\/data transceiver series utilize 10-bit digital encoding and decoding for high-quality video transmission that meets the requirements of EIA RS-250C for short-haul video transmission. These environmentally hardened units provide transmission of four independent video channels and four bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. These units are completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485 with tri-state support. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red\/Green) LED indicators are provided for rapidly ascertaining equipment operating status. These units are interchangeable between stand-alone or card mount configurations.\n\u003cbr\u003e\u003cbr\u003e\n\nFeatures\n\n\u003cli\u003e10-bit digital video transmission: transmits 2 real-time color video signals and 4 bi-directional data signals on one optical fiber\n\u003c\/li\u003e\u003cli\u003eVideo Receiver\/Data Transceiver (1550\/1310 nm)\n\u003c\/li\u003e\u003cli\u003eSupports RS232, RS422, and 2 or 4-wire RS485 with tri-state data interfaces\n\u003c\/li\u003e\u003cli\u003eExceeds all requirements for EIA RS-250C short-haul transmission: Extremely high video performance\n\u003c\/li\u003e\u003cli\u003eExceptionally low video distortion with zero Performance Variation vs. Optical Path Loss\n\u003c\/li\u003e\u003cli\u003eIdeally suited to networks requiring multiple physical layers where video degradation may be a problem\n\u003c\/li\u003e\u003cli\u003eCompatible with all NTSC, PAL, or SECAM CCTV camera systems\n\u003c\/li\u003e\u003cli\u003eTested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line\/low-line voltage conditions and transient voltage protection) of NEMA TS-1\/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment\n\u003c\/li\u003e\u003cli\u003eVoltage transient protection on all power and signal input\/output lines provides unconditional protection from power surges and other voltage transient events.\n\u003c\/li\u003e\u003cli\u003eRobust design ensures extremely high reliability in unconditioned out-of-plant environments\n\u003c\/li\u003e\u003cli\u003eBi-color (Red\/Green) LED status indicators provide rapid indication of critical operating parameters\n\u003c\/li\u003e\u003cli\u003eHot-swappable rack modules\n\u003c\/li\u003e\u003cli\u003eInterchangeable between stand-alone or rack mount use ComFit\n\u003cbr\u003e\u003cbr\u003e\n\nSpecs\n\n\u003c\/li\u003e\u003cli\u003eManufacturer  Comnet Communication Networks\n\u003c\/li\u003e\u003cli\u003eCategory  New\n\u003c\/li\u003e\u003cli\u003eVideo Input: 1 volt pk-pk (75 ohms)\n\u003c\/li\u003e\u003cli\u003eOverload: \u0026gt;1.5V pk-pk\n\u003c\/li\u003e\u003cli\u003eBandwidth (minimum): 10 Hz 6.5 MHz per channel\n\u003c\/li\u003e\u003cli\u003eDifferential Gain: \u0026lt;2%\n\u003c\/li\u003e\u003cli\u003eDifferential Phase: \u0026lt;0.7°\n\u003c\/li\u003e\u003cli\u003eTilt: \u0026lt;1%\n\u003c\/li\u003e\u003cli\u003eSignal-to-Noise Ratio (SNR): 67 dB Typical Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth\n\u003c\/li\u003e\u003cli\u003eData Channels: 4\n\u003c\/li\u003e\u003cli\u003eData Interface: RS232, RS422 and RS485 (2W\/4W)\n\u003c\/li\u003e\u003cli\u003eData Format: NRZ, NRZI, Manchester, Bi-Phase and Sensornet\n\u003c\/li\u003e\u003cli\u003eData Rate: DC-250 Kbps (NRZ)\n\u003c\/li\u003e\u003cli\u003eBit Error Rate: \u0026lt;1 in 10-9 @ Maximum Optical Loss Budget\n\u003c\/li\u003e\u003cli\u003eOperating Mode: Simplex or Full-Duplex\n\u003c\/li\u003e\u003cli\u003eOperating Temp: -40° C to +75° C\n\u003c\/li\u003e\u003cli\u003eStorage Temp: -40° C to +85° C\n\u003c\/li\u003e\u003cli\u003eRelative Humidity: 0% to 95% (non-condensing)\u003c\/li\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195782471915,"sku":"598382","price":3343.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/CON-FVR4014M1.jpg?v=1786479779"},{"product_id":"comnet-fvr4014s1-4-channel-digitally-encoded-video-receiver-4-channels-bi-directional-data-channels-1-fiber-singlemode","title":"Comnet FVR4014S1 4 Channel Digitally Encoded Video Receiver + 4 Channels Bi-directional Data Channels, 1 Fiber, Singlemode","description":"The ComNet™ FVT\/FVR4014 video transmitter\/data transceiver and video receiver\/data transceiver series utilize 10-bit digital encoding and decoding for high-quality video transmission that meets the requirements of EIA RS-250C for short-haul video transmission. These environmentally hardened units provide transmission of four independent video channels and four bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. These units are completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485 with tri-state support. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red\/Green) LED indicators are provided for rapidly ascertaining equipment operating status. These units are interchangeable between stand-alone or card mount configurations.\n\u003cbr\u003e\u003cbr\u003e\n\nFeatures\n\n\u003cli\u003e10-bit digital video transmission: transmits 2 real-time color video signals and 4 bi-directional data signals on one optical fiber\n\u003c\/li\u003e\u003cli\u003eVideo Receiver\/Data Transceiver (1550\/1310 nm)\n\u003c\/li\u003e\u003cli\u003eSupports RS232, RS422, and 2 or 4-wire RS485 with tri-state data interfaces\n\u003c\/li\u003e\u003cli\u003eExceeds all requirements for EIA RS-250C short-haul transmission: Extremely high video performance\n\u003c\/li\u003e\u003cli\u003eExceptionally low video distortion with zero Performance Variation vs. Optical Path Loss\n\u003c\/li\u003e\u003cli\u003eIdeally suited to networks requiring multiple physical layers where video degradation may be a problem\n\u003c\/li\u003e\u003cli\u003eCompatible with all NTSC, PAL, or SECAM CCTV camera systems\n\u003c\/li\u003e\u003cli\u003eTested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line\/low-line voltage conditions and transient voltage protection) of NEMA TS-1\/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment\n\u003c\/li\u003e\u003cli\u003eVoltage transient protection on all power and signal input\/output lines provides unconditional protection from power surges and other voltage transient events.\n\u003c\/li\u003e\u003cli\u003eRobust design ensures extremely high reliability in unconditioned out-of-plant environments\n\u003c\/li\u003e\u003cli\u003eBi-color (Red\/Green) LED status indicators provide rapid indication of critical operating parameters\n\u003c\/li\u003e\u003cli\u003eHot-swappable rack modules\n\u003c\/li\u003e\u003cli\u003eInterchangeable between stand-alone or rack mount use ComFit\n\u003cbr\u003e\u003cbr\u003e\n\nSpecs\n\n\u003c\/li\u003e\u003cli\u003eManufacturer  Comnet Communication Networks\n\u003c\/li\u003e\u003cli\u003eCategory  New\n\u003c\/li\u003e\u003cli\u003eVideo Input: 1 volt pk-pk (75 ohms)\n\u003c\/li\u003e\u003cli\u003eOverload: \u0026gt;1.5V pk-pk\n\u003c\/li\u003e\u003cli\u003eBandwidth (minimum): 10 Hz 6.5 MHz per channel\n\u003c\/li\u003e\u003cli\u003eDifferential Gain: \u0026lt;2%\n\u003c\/li\u003e\u003cli\u003eDifferential Phase: \u0026lt;0.7°\n\u003c\/li\u003e\u003cli\u003eTilt: \u0026lt;1%\n\u003c\/li\u003e\u003cli\u003eSignal-to-Noise Ratio (SNR): 67 dB Typical Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth\n\u003c\/li\u003e\u003cli\u003eData Channels: 4\n\u003c\/li\u003e\u003cli\u003eData Interface: RS232, RS422 and RS485 (2W\/4W)\n\u003c\/li\u003e\u003cli\u003eData Format: NRZ, NRZI, Manchester, Bi-Phase and Sensornet\n\u003c\/li\u003e\u003cli\u003eData Rate: DC-250 Kbps (NRZ)\n\u003c\/li\u003e\u003cli\u003eBit Error Rate: \u0026lt;1 in 10-9 @ Maximum Optical Loss Budget\n\u003c\/li\u003e\u003cli\u003eOperating Mode: Simplex or Full-Duplex\n\u003c\/li\u003e\u003cli\u003eOperating Temp: -40° C to +75° C\n\u003c\/li\u003e\u003cli\u003eStorage Temp: -40° C to +85° C\n\u003c\/li\u003e\u003cli\u003eRelative Humidity: 0% to 95% (non-condensing)\u003c\/li\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195782668523,"sku":"598383","price":3798.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/CON-FVR4014S1.jpg?v=1786479780"},{"product_id":"comnet-fvrxa2c1m-2-channel-bi-directional-dig-24-bit-audio-1-bi-dir-contact-mm-rx-1-f","title":"Comnet FVRXA2C1M 2 Channel Bi-Directional Dig (24 Bit) Audio,+ 1 Bi-Dir Contact, Mm, Rx, 1 F","description":"2 Channel Bi-Directional Dig (24 Bit) Audio,+ 1 Bi-Dir Contact, Mm, Rx, 1 F.\n\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195782766827,"sku":"598495","price":727.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Comnet_Communication_Networks_FVRXA2C1M.jpg?v=1786479780"},{"product_id":"comnet-fvt1021m1-digitally-encoded-video-transmitter-data-receiver-10-bit","title":"Comnet FVT1021M1 Digitally Encoded Video Transmitter\/Data Receiver, 10-Bit","description":"Comnet FVT1021M1 Digitally Encoded Video Transmitter\/Data Receiver, 10-Bit On sale now for $465 .Comnet carries a full line of Fiber Optic and Ethernet Transmission Products.\n\u003cbr\u003e\u003cbr\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195782897899,"sku":"431318","price":865.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/CON-FVT1021M1.jpg?v=1786479781"},{"product_id":"comnet-fvt1021s1-digitally-encoded-video-transmitter-data-receiver-10-bit-1-fiber-single-mode","title":"Comnet FVT1021S1 Digitally Encoded Video Transmitter\/Data Receiver, 10-Bit, 1 Fiber, Single Mode","description":"The ComNet™ FVT\/FVR1021 series video transmitter\/ receiver and data transmitter\/receiver supports the simultaneous transmission of short-haul quality 10-bit Digitally Encoded video and return data over one multimode or single mode optical fiber. This module is universally compatible with major CCTV camera manufacturers and supports RS-232 and RS-422 data interfaces. The FVT\/FVR1021 allows the user to set the data through a switch on the unit. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red\/Green) LED indicators are provided for rapidly ascertaining equipment operating status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.\n\u003cbr\u003e\u003cbr\u003e\n\nFeatures\n\n\u003cli\u003e10-bit Digital Video Transmission\n\u003c\/li\u003e\u003cli\u003eVideo Receiver\/Data Transceiver (1550\/1310 nm)\n\u003c\/li\u003e\u003cli\u003eCompatible with all NTSC, PAL, or SECAM CCTV camera systems\n\u003c\/li\u003e\u003cli\u003eFull Color Compatibility\n\u003c\/li\u003e\u003cli\u003eExceeds RS-250C Short-Haul quality\n\u003c\/li\u003e\u003cli\u003eSupports RS-232 and RS-422 data interfaces\n\u003c\/li\u003e\u003cli\u003eSupports Manchester and bi-phase data\n\u003c\/li\u003e\u003cli\u003eNo In-field electrical or optical adjustments\n\u003c\/li\u003e\u003cli\u003eBi-color (Red\/Green) LED status indicators provide rapid indication of critical operating parameters\n\u003c\/li\u003e\u003cli\u003eIntegrated WDM for greater product reliability\n\u003c\/li\u003e\u003cli\u003eVoltage transient protection on all power and signal input\/output lines provides unconditional protection from power surges and other voltage transient events.\n\u003c\/li\u003e\u003cli\u003eDistances 3 km (2 ml) without repeaters\n\u003c\/li\u003e\u003cli\u003eTested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line\/low-line voltage conditions and transient voltage protection) of NEMA TS-1\/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.\n\u003c\/li\u003e\u003cli\u003eHot-swappable rack modules\n\u003c\/li\u003e\u003cli\u003eInterchangeable between stand-alone or rack mount use – ComFit\n\u003c\/li\u003e\u003cli\u003eAutomatic resettable fuses on all power lines\n\u003cbr\u003e\u003cbr\u003e\n\nSpecs\n\n\u003c\/li\u003e\u003cli\u003eManufacturer  Comnet Communication Networks\n\u003c\/li\u003e\u003cli\u003eCategory  New\n\u003c\/li\u003e\u003cli\u003eVideo Input: 1 volt pk-pk (75 ohms)\n\u003c\/li\u003e\u003cli\u003eOverload: \u0026gt;1.5V pk-pk\n\u003c\/li\u003e\u003cli\u003eBandwidth: 5 Hz - 6.5 MHz\n\u003c\/li\u003e\u003cli\u003eDifferential Gain: \u0026lt;2%\n\u003c\/li\u003e\u003cli\u003eDifferential Phase: \u0026lt;0.7°\n\u003c\/li\u003e\u003cli\u003eTilt: \u0026lt;1%\n\u003c\/li\u003e\u003cli\u003eSignal-to-Noise Ratio (SNR): \u0026gt;67 dB @ Maximum Optical Loss Budget\n\u003c\/li\u003e\u003cli\u003eMax. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth\n\u003c\/li\u003e\u003cli\u003eOperating Temp: -40° C to +75° C\n\u003c\/li\u003e\u003cli\u003eStorage Temp: -40° C to +85° C\n\u003c\/li\u003e\u003cli\u003eRelative Humidity: 0% to 95% (non-condensing)\u003c\/li\u003e","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49195783356651,"sku":"598318","price":1152.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/CON-FVT1021S1.jpg?v=1786479783"}],"url":"https:\/\/www.alldataresource.com\/collections\/transmission-fiber.oembed","provider":"All Data Resource","version":"1.0","type":"link"}