{"product_id":"altronix-t1rm3f4v-4-door-altronix-mercury-access-and-power-integration-kit-trove1m1r-with-eflow6nbv-acm4cb-pds8cb-vr6","title":"Altronix T1RM3F4V | 4-Door Altronix\/Mercury Access and Power Integration Kit - Trove1M1R with eFlow6NBV, ACM4CB, PDS8CB, VR6","description":"Altronix T1RM3F4V | 4-Door Altronix\/Mercury Access and Power Integration Kit - Trove1M1R with eFlow6NBV, ACM4CB, PDS8CB, VR6\u003cbr\u003e\u003cbr\u003e\u003cp\u003e4-Door Altronix\/Mercury Access and Power Integration Kit - Trove1M1R with eFlow6NBV, ACM4CB, PDS8CB, VR6. Altronix T1RM3F4V kit consists of Trove1R enclosure and TM1R Altronix \u0026amp; Mercury backplane with 12VDC or 24VDC (factory set at 24VDC) @ 6A power su pply\/charger, 12VDC voltage regulator, eight (8) output fused dual output power distribution module and four (4) fuse protected output access control module. This kit also accommodates various combinations of Mercury boards for up to four (4) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labour costs.\u003c\/p\u003e\u003ch5\u003eeFlow6NBV Power Supply\/Charger \/ Input\u003c\/h5\u003eVoltage: 220VAC (working range 198VAC - 256VAC), 50\/60Hz, 2.5A.\u003cbr\u003eFusing: 5A \/ 250V.\u003ch5\u003eOutput\u003c\/h5\u003eVoltage: Factory set at 24VDC.\u003cbr\u003eCurrent: 6A continuous.\u003cbr\u003eMaximum Supply Current for Main and Aux. Outputs on eFlow6NBV Power Supply board, PDS8 Power Distribution Module’s and ACM4 Access Power Controller’s outputs is 5.6A.\u003cbr\u003eAuxiliary: Class 2 power-limited @ 1A (unswitched).\u003cbr\u003eOther: Overvoltage protection. Filtered and regulated.\u003ch5\u003eBattery Backup\u003c\/h5\u003eType: Sealed lead acid or gel type.\u003cbr\u003eFuse Rating: 10A @ 32VDC.\u003cbr\u003eFailover: Upon AC loss, instantaneous.\u003ch5\u003eFire Alarm Disconnect\u003c\/h5\u003eSupervised: Latching or non latching.\u003cbr\u003eEOL: 10K Resistor.\u003ch5\u003eSupervision\u003c\/h5\u003eAC Failure: Form “C” contacts.\u003cbr\u003eBattery: Form “C” contacts.\u003cbr\u003eLow DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units. Prevents deep battery discharge.\u003ch5\u003eIndicators LED\u003c\/h5\u003eInput: 220VAC is present.\u003cbr\u003eDC Output: Powered.\u003cbr\u003eBattery: Discharged or not connected.\u003ch5\u003ePDS8 Power Distribution Module \/ Input\u003c\/h5\u003eVoltage: 24VDC from eFlow6NBV and 12VDC from VR6.\u003cbr\u003eInput Fuse: 10A \/ 250V.\u003ch5\u003eOutputs\u003c\/h5\u003eVoltage: 12 or 24VDC individually selectable.\u003cbr\u003eOutput Fuses: 3A \/ 32VDC.\u003ch5\u003eIndicators (LED)\u003c\/h5\u003eDC Output: Eight (8) individual output LEDs.\u003cbr\u003eGreen: 12VDC\u003cbr\u003eRed: 24VDC.\u003ch5\u003eVR6 Voltage Regulator \/ Input\u003c\/h5\u003eVoltage: 24VDC from eFlow6NBV.\u003ch5\u003eOutputs\u003c\/h5\u003eVoltage: 12 or 24VDC individually selectable.\u003cbr\u003eOutput Fuses: 3A \/ 32VDC.\u003ch5\u003eIndicators (LED)\u003c\/h5\u003eDC Output: Eight (8) individual output LEDs.\u003cbr\u003eGreen: 12VDC\u003cbr\u003eRed: 24VDC.\u003ch5\u003eACM4 Access Power Controller \/ Input\u003c\/h5\u003eVoltage: 24VDC from eFlow6NBV.\u003cbr\u003eFusing: 10A \/ 250V.\u003ch5\u003eOutput\u003c\/h5\u003eVoltage: 24VDC.\u003cbr\u003eFour (4) independently controlled 2.5A outputs:\u003cbr\u003ea) Four (4) Fail-Safe and\/or Fail-Secure power outputs.\u003cbr\u003eb) Four (4) dry form “C” 5A rated relay outputs.\u003cbr\u003ec) Any combination of the above.\u003cbr\u003eFour (4) auxiliary power outputs (unswitched).\u003cbr\u003eOutput Fuses: 3A \/ 32VDC.\u003ch5\u003eIndicators (LED's)\u003c\/h5\u003eRed LEDs: Outputs are triggered (relays energized).\u003cbr\u003eGreen LED: FACP disconnect is triggered.\u003ch5\u003eEnvironmental \/ Temperature\u003c\/h5\u003eOperating: 0° C to 49° C (32° F to 120° F).\u003cbr\u003eStorage: - 20° C to 70° C ( - 4° F to 158° F).\u003ch5\u003eRelative Humidity\u003c\/h5\u003eRelative Humidity 85% +\/- 5%.\u003ch5\u003eBTU\/Hr (approx.):\u003c\/h5\u003e115 BTU\/Hr.","brand":"Anixter","offers":[{"title":"Default Title","offer_id":49212941730027,"sku":"10246264","price":1331.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/Altronix-T1RM3F4V-Altronix-Mercury-Rack-4-Door-Sy-Fuse-220V-Main2.jpg?v=1786585678","url":"https:\/\/www.alldataresource.com\/products\/altronix-t1rm3f4v-4-door-altronix-mercury-access-and-power-integration-kit-trove1m1r-with-eflow6nbv-acm4cb-pds8cb-vr6","provider":"All Data Resource","version":"1.0","type":"link"}