{"product_id":"tripp-lite-is250-isolation-transformer-based-power-conditioner-superior-line-noise-reduction-and-spike-suppression","title":"Tripp-Lite IS250 Isolation Transformer-Based Power Conditioner - Superior Line Noise Reduction And Spike Suppression","description":"Tripp Lite Isolator series isolation transformer-based power conditioners offer complete line isolation, continuous noise filtering and enhanced normal and common mode surge suppression. Internal low-impedance isolation transformer component with Faraday Shield offers 100% isolation from the input AC line. Secondary neutral to ground bonding eliminates common mode noise, providing an isolated ground reference for sensitive equipment and an inexpensive alternative to the installation of dedicated circuits and site electrical upgrades. Removes EMI\/RFI noise, utility switching transients, background spikes generated by other on-site loads and utility or lightning related surge conditions. Additional surge suppression components placed at both the line input and transformer output combined with full line isolation offers continuous line filtering of a full range of power line noise in all modes. Continuous transformer filtering with no wearable parts uniquely reduces surges in the worst of power environments to harmless levels. Reduces 6000V IEEE C62.41 Cat A\u0026amp;B ring wave and combination wave test surges to only 0.5V common mode. Model IS250 offers 250 watts capacity with 2 widely spaced output receptacles, a 6-ft power cord, circuit breaker overload protection and lighted power switch. Rugged all-metal unit housing ships ready for upright tower or wallmount placement in industrial, medical, office or network environment.\n\u003cbr\u003e\u003cbr\u003e\n\n\nFeatures\n\n\u003cli\u003e    Tripp Lite Isolator series isolation transformer-based power conditioners offer complete line isolation, continuous noise filtering and enhanced common mode surge suppression\n\u003c\/li\u003e\u003cli\u003e    Supports combined loads up to 250 watts continuous\/2.1A at 120V\n\u003c\/li\u003e\u003cli\u003e    Isolation transformer with Faraday Shield offers 100% isolation from the input AC line\n\u003c\/li\u003e\u003cli\u003e    Neutral to ground bonding at the secondary eliminates common mode noise and provides an isolated ground reference for sensitive equipment\n\u003c\/li\u003e\u003cli\u003e    Isolation transformer design serves as an inexpensive alternative to the installation of dedicated circuits and site electrical upgrades\n\u003c\/li\u003e\u003cli\u003e    Removes EMI\/RFI noise, utility switching transients, background spikes and power problems generated by other on-site loads, utility grid-switching and lightning related surges\n\u003c\/li\u003e\u003cli\u003e    Line isolation with additional surge suppression components offer continuous line filtering of a full range of power line noise in all modes\n\u003c\/li\u003e\u003cli\u003e    Continuous transformer filtering with no wearable parts reduces surges in the worst of power environments to harmless levels\n\u003c\/li\u003e\u003cli\u003e    Includes 2 widely-spaced NEMA5-15R output receptacles, 6 ft power cord, circuit breaker overload protection and lighted power switch\n\u003c\/li\u003e\u003cli\u003e    Rugged all-metal housing ships ready for upright tower or wallmount installation\n\u003cbr\u003e\u003cbr\u003e\n\n\n\nSpecs\n\n\u003c\/li\u003e\u003cli\u003eManufacturer \t                          Tripp-Lite\n\u003c\/li\u003e\u003cli\u003eCondition \t                               New\n\u003c\/li\u003e\u003cli\u003eAmp Capacity \t2.1A at 120V AC\n\u003c\/li\u003e\u003cli\u003eEfficiency \t96%\n\u003c\/li\u003e\u003cli\u003eForm Factor \tSmall tower format, wall mountable\n\u003c\/li\u003e\u003cli\u003eInput Plug Type \tNEMA 5-15P\n\u003c\/li\u003e\u003cli\u003eLet-through Voltage (Combination Wave) \tL-N: \u0026lt;130V L-G: \u0026lt;10V N-G: \u0026lt;0.5V IEEE C62.41 Cat. B\n\u003c\/li\u003e\u003cli\u003eLet-through Voltage (Ring Wave) \tL-N: \u0026lt;10V L-G: \u0026lt;10V N-G: \u0026lt;0.5V IEEE C62.41 Cat. A\n\u003c\/li\u003e\u003cli\u003eNoise Suppression Rating \t33-65dB normal mode; \u0026gt;80dB common mode\n\u003c\/li\u003e\u003cli\u003eNominal Voltage \/ Frequency \t120V \/ 60Hz\n\u003c\/li\u003e\u003cli\u003eOutput Receptacle Qty \/ Type \t2 NEMA 5-15R\n\u003c\/li\u003e\u003cli\u003eOver Current Protection \tYes, 2A circuit breaker\n\u003c\/li\u003e\u003cli\u003eSuppression Joule Rating \t680 Joules\n\u003c\/li\u003e\u003cli\u003eSurge Test Conditions \tPer ANSI\/IEEE C62.41 - (IEEE587) Cat. A \u0026amp; B test waveforms\n\u003c\/li\u003e\u003cli\u003eTotal Harmonic Distortion \tless than 1%\n\u003c\/li\u003e\u003cli\u003eTransformer Type \tLow impedence isolation transformer\n\u003c\/li\u003e\u003cli\u003eVA \/ Watt Capacity \t250\n\u003c\/li\u003e\u003cli\u003eInput cord length (ft.) \t6\n\u003c\/li\u003e\u003cli\u003eInput cord length (m) \t1.83\n\u003c\/li\u003e\u003cli\u003eCooling method \tConvection\n\u003c\/li\u003e\u003cli\u003eUnit Dimensions (HWD\/in) \t4.75 x 4.75 x 7.5\n\u003c\/li\u003e\u003cli\u003eUnit Dimensions (HWD\/cm) \t12.07 x 12.07 x 19.05\n\u003c\/li\u003e\u003cli\u003eShipping Dimensions (HWD\/in) \t5.75 x 7.25 x 9\n\u003c\/li\u003e\u003cli\u003eShipping Dimensions (HWD\/cm) \t14.61 x 18.42 x 22.86\n\u003c\/li\u003e\u003cli\u003eReceptacle Color \tBlack\u003c\/li\u003e","brand":"Tripp-Lite","offers":[{"title":"Default Title","offer_id":49195795579115,"sku":"381589","price":268.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/1616\/0235\/files\/IS250.jpg?v=1786479848","url":"https:\/\/www.alldataresource.com\/products\/tripp-lite-is250-isolation-transformer-based-power-conditioner-superior-line-noise-reduction-and-spike-suppression","provider":"All Data Resource","version":"1.0","type":"link"}