Select Engineered Systems CATDR4 Access Control SES CATDR4 CAT Expansion Modules
Select Engineered Systems CATDR4 Access Control SES CATDR4 CAT Expansion Modules

Select Engineered Systems CATDR4 Access Control SES CATDR4 CAT Expansion Modules

0 Review(s)
Availability:
Part Number: SLT-CATDR4
$857.32
Retail Price:$951.37
Your Savings:$94.05(10%)
Select Engineered Systems Inc. Reader Expansion Module 4 Entrance
Write a Review
Access Control - SES CATDR4 CAT Expansion Modules.

Features
  • The CATDR4 works with any CAT and provides four wiegand inputs for card readers, keypads or long range proximity Includes all of the necessary relays to control up to four entrances
  • Each CATDR4 is controlled by the CAT and is connected via RS485
  • Three CATDR4 may be added to any CAT and the last expansion module can be 4,000 feet away
  • Each CATDR4 is “opto isolated” from all other expansion modules and the CAT providing additional surge suppression and isolation of any surge damage
  • CATDR4 and CATRLY8 may both be added to any CAT
  • CATDR4 is a four reader expansion module that will interface with any CAT
  • CATDR4 is supplied with a 18 VAC 40VA transformer
  • Up to 3 CATDR4 expansion modules may be added to any CAT
  • The CATDR4 is opto Isolated (electrically isolated) from any other expansion module(s) and the CAT
  • The CATDR4 provides 4 wiegand reader / keypad inputs
  • The CATDR4 provides door sense input, REX (request to exit) input, door shunt output and door release output for each of the 4 entrances. (relay output is 24V AC/DC @ 3 amps)
  • The CATDR4 (maximum 3) may be used with the CATRLY8 (maximum 32) on any CAT expansion
  • The CATDR4 is programmed via the CAT using Selcom software

    Specs
  • Manufacturer Select Engineered Systems Inc.
  • Condition New
  • Dimensions: 11'” W x 11” H x 3 1/2” D
  • Material Used: 16 gauge steel, weather resistant enclosure available, order part #OPTRSTWRH
  • Finish: Painted
  • Power Input: 18 VAC, 40 VA UL listed transformer (provided with unit)
  • Emergency Battery: Optional 12V .7 AHR GEL CELL on constant charge (for control of line voltage variation)
  • Mounting: Surface, flush or pedestal mount
  • Shipping Weight: Approx. 15 lbs
  • Operating Environment: Temp.: -20º to 40º C; (CATV temp.: 0º to 40º C) Relative humidity: 5% to 95% non-condensing
  • Relay Output: Form C dry contact 24V @ 3AMP
  • Recently Viewed Items

    Customer Service available Mon - Fri 7am - 7pm EST

    Contact us: [email protected]