Antaira Technologies LNP-0802-M-24 | 8-Port Industrial PoE+ Unmanaged Ethernet Switch with 6 10/100Tx (30W/Port) + 2 100Fx Multimode 2Km, 12VDC-36VDC

Antaira’s LNP-0802-24 switch is a smart 8-port Industrial Unmanaged Ethernet Switch that supports IEEE-802.3at (Power-over-Ethernet Plus) on ports 1 to 6. The switch comes with 2 x 100Fx ports with SC type connectors and supports Multimode in 2Km. The LNP-0802-24 switch supports a dual power input having a low voltage range (12-36VDC) and a built-in voltage booster, allowing the unit to give a full 48VDC PoE power for any mobile PoE application or any low voltage power sourcing environment. The LNP- 0802-24 switch provides up to 30 watts of power per port. This switch can be used to power IEEE 802.3af or 802.3at compliant power devices (PD), eliminating the need for additional wiring, and supports IEEE 802.3/802.3u/802.3x with 10/100BTx, full or h alf duplex, and MDI/MDI-X auto sensing to provide an economical solution for the Industrial Ethernet Network. In addition, the Network Broadcast Storm Protection and built-in relay warning function alerts network engineers when power failures or port b reaks occur.

Antaira’s LNP-0802-24 series switch is a smart 8-port Industrial Unmanaged Ethernet Switch that supports IEEE-802.3at (Power-over-Ethernet Plus) on ports 1 to 6. The switch comes with 2 x 100Fx ports with SC or ST type connectors and supports Multi-mode in 2Km, or Single-mode in 30Km.The LNP-0802-24 series switch supports a dual power input having a low voltage range (12~36VDC) and a built-in voltage booster, allowing the unit to give a full 48VDC PoE power for any mobile PoE application or any low voltage power sourcing environment. The LNP-0802-24 series provides up to 30 watts of power per port. This switch can be used to power IEEE 802.3af or 802.3at compliant power devices (PD), eliminating the need for additional wiring, and supports IEEE 802.3/802.3u/802.3x with 10/100BTx, full or half duplex, and MDI/MDI-X auto sensing to provide an economical solution for the Industrial Ethernet Network. In addition, the Network Broadcast Storm Protection and built-in relay warning function alerts network engineers when power failures or port breaks occur.