George Risk Industries - Usa 2600T-PHS-W | Remote sensor case with terminal connections for 2500K and 2600K

Undetected water damage- such as that caused by leaking pipes or corroded water heaters- cost homeowners tens of thousands of dollars each year. Such repairs are time consuming and costly to correct. Applications could include computer room sub-floor areas- telephone equipment rooms- bathrooms- laundry rooms- any areas adjacent to a water storage tank or piping. Also evaporative air conditions- drip pans- overflows and/or drains. Using no mechanical parts- the GRI Water Sensors are triggered by a moisture bridge across the sensor contacts. The GRI Water Sensors can be installed to detect a layer of water as minute as 1/16 of an inch in depth. The 2600 Closed Loop Sensors use an external power source to energize a built-in relay contact so battery power is not recommended. Used in a closed loop configuration- an alarm condition will occur when moisture is detected- or if power to the sensor is lost- and if the sensor should fail. The relay output can be wired directly to any alarm panel or can be used to actuate an external device- i.e. transmitter- annunciator-.