Takex PB-20TE 66'/132' Double Module 4-Channel Twin Beam, NO/NC, 10-30 VDC

The Takex Intelligent "Twin" Photoelectric Beam is designed to the highest standards of quality and reliability for photoelectric beam intrusion detection. Unique twin beams are synchronized to work together to reinforce the unit's range and stability in severe weather conditions. The "intelligence" comes from having 4 different selectable frequencies which allow the stacking of beams to create a "wall of light". The system has a rotary optical system for easy installation and proper alignment.

Features

Synchronized twin beams reduce false alarms caused by flying birds and falling leaves

Trouble-free operation in 50,000 lux illumination is assured by a specially designed filter that effectively cuts visible rays. The result is excellent tolerance against sunlight, headlights, fluorescent or or mercury light

Easy beam alignment with the aid of a special view finder

Rotary Optical System - the optical system of both the transmitter and the receiver can be rotated a full 180 deg. to allow for side aiming

A sealed optical system prevents intrusion and interfernce by insects

Wide adjustment (hor, +/- 90 deg. ver. +/- 10 deg.)

A special hood attached on the sensor cover offers protection against frost and dew so that the beam contines without interruption

Specs

Manufacturer Takex America, Inc.

Condition New

Detection System Twin Active Infrared Beam

Wavelength 940nm

Modulation Double Modulation

Protection Distance Outdoors 20m (66ft.)

Protection Distance Indoors 40m (132ft.)

Signal Arrival Distance 200m (660ft.)

Response Time 50-700msec.Adjustable

Frequency Selection 4 Channels

Alarm Output Dry Relay Contact

Form C, N/O - C - N/C

Reset: Approx. 1sec.

Tamper Output Micro-switch Dry Contact

Contact Rating2 30V (AC/DC) 0.5A Max.

Alarm Led Red On at Alarm

Sensitivity Attenuation Led Red On when beam reception is attenuated

Alarm Memory Led Red Not Applicable

Lens Adjustment Vertical: 10° / Horizontal: 90°

Supply Power 10 to 30VDC ( non polarity)

Current Consumption 55mA

Ambient Temperature -13F° to +140°F (-25°C to +60°C)

Installation Wall or Post mounting

Wiring Terminals

Accessories Refer Accessory Listing

External Appearance PC resin (wine red)